1/7
Vocabulary practice flashcards covering laboratory techniques for accurately measuring the mass, volume, and density of liquids using electronic balances and measuring cylinders.
Meniscus
The curved upper surface of a liquid column caused by surface tension, which must be read at its lowest point.

Accuracy
How close an experimental measurement is to the true or accepted value.
Cylinder & Balance
Specialised scientific tools used to measure volume in millilitres (mL) and mass in grams (g).
Taring (Method A)
A technique where an empty, dry container is placed on an electronic balance pan and the tare button is pressed to reset the reading to 0.00g, allowing the mass of the added liquid to be read directly.

Mass by Difference (Method B)
A laboratory method to determine liquid mass by weighing the empty dry bottle, recording the mass of the bottle containing liquid (m1), and calculating liquid mass using the formula mwater=m2−m1.
Parallax Error
An observational error in volume measurement caused by viewing the scale from above (yielding a falsely high reading) or from below (yielding a falsely low reading), avoided by keeping eye level with the bottom of the meniscus.

Step-by-Step Bottle Analysis
The experimental procedure consisting of: 1) Measuring total mass (mtotal) on a zeroed balance; 2) Carefully pouring liquid into a graduated cylinder without splashing; 3) Reading liquid volume (V) aligned at the bottom curve of the meniscus; 4) Weighing the empty dry bottle (mbottle) to calculate water mass.
Density (ρ)
The physical property relating mass to volume via the formula ρ=m÷V. Pure water has a density of 1.00g/cm3 at room temperature, where 1mL=1cm3.