1/28
Comprehensive practice flashcards covering FMS holding procedures, RNAV/GPS approach types, approach briefing, conventional radio navigation, and automated flight control systems including the KAP 140 and Garmin GFC 700.
Standard Holding Pattern
A holding pattern defined at an active waypoint, present position, or direct-to waypoint that uses right-hand turns as the standard direction of holding.
Suspend Mode (SUSP)
A specialized nonsequencing mode automatically activated by the FMS/GPS during preprogrammed holds or at the Missed Approach Point (MAP) that stops automatic waypoint sequencing and sets the inbound course to the holding waypoint.
Terminal Mode (GPS Sensitivity)
An integrity monitoring mode automatically activated within 30NM of the destination airport when RAIM requirements are met, tightening Course Deviation Indicator (CDI) full-scale sensitivity from 5NM to 1NM.
Approach Mode (GPS Sensitivity)
An integrity monitoring mode automatically activated 2NM prior to the Final Approach Waypoint (FAWP) that increases RAIM requirements and tightens CDI full-scale deflection sensitivity from 1NM to 0.3NM.
Lateral Navigation (LNAV) Approach
A non-precision instrument approach procedure providing lateral course guidance only, permitting descent down to a published Minimum Descent Altitude (MDA).
Lateral / Vertical Navigation (LNAV/VNAV) Approach
An instrument approach procedure providing lateral and vertical guidance utilizing certified barometric VNAV (baro-VNAV) and/or WAAS, which enhances vertical position accuracy to within 3meters.
Localizer Performance with Vertical Guidance (LPV) Approach
An approach procedure that utilizes GPS for lateral guidance and IFR-approved GPS/WAAS receivers to generate electronic vertical glide path guidance down to decision height minimums.
RNAV (GPS) Approach Waypoints
The four required database-loaded waypoints that define every RNAV approach procedure: Initial Approach Waypoint (IAWP), Final Approach Waypoint (FAWP), Missed Approach Waypoint (MAWP), and Missed Approach Holding Waypoint (MAHWP).
Vectors to Final (VTF)
An FMS approach feature selected when radar vectors are assigned, which activates the inbound course to the FAF, draws the final approach course, and deletes all intermediate waypoints prior to the Final Approach Fix (FAF).
AMORTS
A standardized briefing acronym for approach preparation: A (Approach Plate verification), M (Minimum Altitudes), O (Overshoot / missed approach procedures), R (Radios set active and standby), T (Time / Expected Approach Time in a hold), and S (Special Considerations such as obstacles).

Procedure Turn (Course Reversal)
A maneuver used to reverse aircraft direction and align with the intermediate or final approach course (and lose altitude if necessary) when arriving at an IAF from an opposing heading; common types include Standard (45∘), Racetrack, and Teardrop or S-Turn.
Missed Approach Point (MAP) Passage Indication
The transition of the CDI TO/FROM flag from TO to FROM upon passing abeam the MAP, which provides definitive confirmation of waypoint passage even if displayed distance never counts down to 0.0NM.
HSI Navigation Source Color Coding
The standard color conventions on the electronic Horizontal Situation Indicator where magenta represents GPS navigation and green represents ground-based navigation sources (VOR, Localizer, Glideslope).
Autopilot Servos
Electromechanical actuators connected to primary flight controls via mechanical linkages that automatically manipulate Pitch, Roll, Pitch Trim, and Yaw surfaces based on AFCS commands.
Flight Director (FD)
The computational system—hosted within Integrated Avionics Unit #1 (IAU #1 / GIA 63W) on the G1000—that calculates and displays steering cues on the PFD to guide hand-flown control inputs or drive the autopilot.

Flight Director Command Bars
A single magenta chevron/cue displayed on the PFD that moves vertically for pitch guidance and banks for roll guidance; pitch cues are limited to −15∘ to +20∘ and roll to 22∘, and bars disappear if pitch exceeds +30∘/−20∘ or bank exceeds 65∘.
Go Around (GA) Mode
A coupled pitch and roll flight director mode activated by a throttle-mounted switch that commands a wings-level, pitch-up climb attitude for a missed approach, automatically disengaging the autopilot and arming Selected Altitude Capture Mode on the GFC 700.

Honeywell KAP 140 Autopilot
A two-axis, rate-based digital autopilot system with altitude preselect functionality that controls pitch, roll, and pitch trim (without yaw damper control) independently of the aircraft's artificial horizon.
KAP 140 Attitude Sensing
The system architecture where roll rate information is derived from the turn coordinator and pitch information is derived from an internal pressure sensor and accelerometer, completely bypassing the aircraft's artificial horizon.
KAP 140 UP/DN Buttons
Vertical mode trim keys that increment/decrement commanded vertical speed by 100ft/min per press when VS mode is active, or adjust the altitude hold reference by 20feet per press when ALT mode is active.
KAP 140 Altitude Alert (ALERT) Annunciation
An alert system where the ALERT light illuminates and 5 short tones sound 1,000feet before reaching the selected altitude, extinguishes 200feet prior, illuminates briefly at capture, and sounds again 200feet after departing the selected altitude.
Garmin GFC 700
A fully integrated digital Automatic Flight Control System (AFCS) architecture featuring three GSA 81 servos (pitch, roll, pitch trim) and one GSA 80 servo (yaw damper) installed in aircraft such as the Diamond DA42.
G1000 IAU Failure Consequences
System failure dependencies where failure of IAU #1 causes total loss of the flight director, while failure of either IAU (#1 or #2) results in complete loss of autopilot capability.

AFCS Status Box
The annunciator panel located at the top of the PFD displaying lateral modes on the left, autopilot and yaw damper engagement status in the center, and vertical modes on the right.
AFCS Mode Annunciation Color Standards
The color conventions on the G1000 AFCS status display where green text denotes active/engaged modes and white text denotes armed modes awaiting capture.

Flight Level Change (FLC) Mode
A vertical autopilot mode on the GFC 700 that acquires and maintains a selected Airspeed Reference bug using pitch control while climbing or descending to a preselected target altitude.
Heading Select (HDG) Mode
A lateral autopilot flight director mode that commands the aircraft to turn to and maintain the heading selected by the heading bug on the HSI, completely bypassing any programmed FMS flight route.
Vertical Speed (VS) Mode
A vertical autopilot mode that maintains a constant rate of climb or descent; it requires constant pilot throttle management to avoid an aerodynamic stall during high-altitude climbs.
Selected Altitude Capture Mode (ALTS)
A vertical flight control mode that automatically arms upon setting a target altitude on the altitude selector, automatically transitioning the autopilot to level off smoothly at the selected altitude.