1/46
Aircraft
A vehicle that is able to fly by gaining support from the air
Airplane consists of:
wings, fuselage, empennage, powerplant, and landing gear.
Categories of aircraft:
airplane, glider, rotorcraft, lighter than air
Categories of airplane:
normal, utility, acrobatic
Normal category airplane:
less than 12,500lbs, 3.8G’s, normal maneuvers
Utility category airplane:
less than 12,500lbs, 4.4G’s, normal maneuvers and limited spins
Acrobatic category aircraft:
less than 12,500lbs, 6.0 G’s, unrestricted maneuvers
C152 airplane category
utility or normal
Airplane classes:
single engine land, single engine sea, multi engine land, multi engine sea
Airplane types:
make and model
Fuselage
Central body of an airplane and is designed to accommodate the crew, passengers, and cargo
Fuselage construction types:
truss type, monocoque, semimonocoque, composite
Monocoque fuselage construction
bulkhead, stressed skin, formers
Semimonocoque fuselage construction
bulkhead, stressed skin, formers, and stringers
Wings
airfoils attached to each side of the fuselage and are the main lifting surfaces that support the aircraft in lfight
Number of wings
monoplane, biplane
Wing locations
low wing, mid wing, high wing
Low wing benefits:
less maneuverable, less stable
High wing benefits:
more stable, less maneuverable
Wing support types:
cantilever, semi-cantilever
Wing
airfoils attached to each side of the fuselage and are the main lifting surfaces that support the airplane in flight
Wing aspect ratio
Wingspan, average chord, how long or short the wings are
Low wing aspect ratio:
Less surface, better speed
high aspect ratio:
More surface, more lift
Wing sweep types:
staight, sweptback
Wing planform types:
constant, tapered
Constant wing planform:
more lift, more induced drag
Tapered wing planform:
less lift, less induced drag
Empennage consists of:
Stabilizers, elevators, rudder, trim tab
Landing gear set ups:
Conventional, tricycle
Classifications of landing gear:
Fixed, retractable
Powerplant
Includes engine and propeller
Four forces of flight:
lift, weight, thrust, drag
Definition of lift:
Upward force created by the wings as air passes above and below them
Lift acts in which direction?
perpendicular to the relative wind
At what point does lift act?
center of pressure
Definition of airfoil:
any surface that provides aerodynamic force when it interacts with a moving stream of air to generate lift
Parts of airplane that are airfoils:
wings, flaps, horizontal stabilizer, vertical stabilizer, fuselage
2 theories of lift:
newton’s third law, bernoulli’s principle
newton’s third law:
for every action, there is an equal and opposite reaction
bernoulli’s principle
total energy in a steadily flowing fluid is constant along the flow path, thus increase in speed must therefore be matched by decrease in pressure
Chord line runs from:
leading edge to trailing edge
Angle of attack is the angle between:
chord line and relative wind
Critical angle of attack in degrees:
15-16 degrees
Airfoil types
cambered, symmetrical
Cambered airfoils are found on:
wings
Symmetrical airfoils are found on:
vertical and horizontal stabilizers