1/42
Flashcards covering energy types, thermodynamics, calorimetry, enthalpy, bond energies, and Hess's Law based on Chapter 3 lecture notes.
What is energy defined as in Chapter 3?
Energy is defined as the capacity to do work.
What are the two broad accounts into which energy is divided?
Kinetic energy (energy based on motion) and Potential energy (energy based on position).
What forms of kinetic energy are highlighted in the lecture notes?
Thermal energy (associated with the random motion of atoms and molecules) and Radiant energy (energy coming from the sun).
What forms of potential energy are identified in the lecture notes?
Chemical energy (stored in chemical bonds), Nuclear energy (stored in neutrons and protons in the atom), Electrical energy (stored in a substance's charge), and Mass.
What is the formula for kinetic energy and its equivalent SI unit in terms of base units?
The formula is Ekinetic=21mv2, and the SI unit is the Joule, where 1J=1kg⋅m2/s2.
What is the kinetic energy of a 0.0080kg bullet fired from a 9mm handgun at a velocity of 457m/s?
835.5J.
How fast must a 105kg CFL linebacker run to have a kinetic energy of 1671J?
3.99m/s.
What equation represents electrical potential energy between two ions?
Eelectrical=rkq1q2, where q1 and q2 are charges, r is distance in picometers (pm), and k=2.31×10−16J⋅pm.
How are heat and temperature distinguished in thermodynamics?
Heat is the transfer of thermal energy between two bodies at different temperatures, whereas temperature is a measure of the thermal energy.
What does the First Law of Thermodynamics state, and what is its mathematical expression for the universe?
Energy cannot be created or destroyed; it can flow from one form to another. Its mathematical expression is ΔUuniv=ΔUsys+ΔUsurr=0.

Which thermodynamic system types exchange mass and/or energy with their surroundings, as shown in this figure?
Open systems exchange both mass and energy, closed systems exchange energy only, and isolated systems exchange neither mass nor energy.
How are signs for heat (q) defined from a system-based perspective?
If the system gains heat from the surroundings, q is positive (q>0). If the system releases heat to the surroundings, q is negative (q<0).
What is the difference between an exothermic process and an endothermic process?
An exothermic process gives off heat from the system to the surroundings (q<0), whereas an endothermic process absorbs heat supplied from the surroundings to the system (q>0).
What are the definitions of molar heat capacity (Cm), specific heat capacity (S), and general heat capacity (C)?
Molar heat capacity (Cm) is heat needed to raise 1mol by 1∘C; Specific heat capacity (S) is heat needed to raise 1g by 1∘C; Heat capacity (C) is heat needed to raise an entire object by 1∘C.
What equation calculates pressure-volume work done by expanding gases, and what is the conversion factor for liter-atmospheres?
w=−PΔV, where 1 liter-atmosphere=101.325J.
What is a state function versus a path function?
State functions depend only on the current state of the system regardless of how that condition was achieved (e.g., energy, pressure, volume, temperature), whereas path functions depend on how the change occurs (e.g., work, heat, distance traveled).
What formula estimates reaction enthalpy (ΔHrxn) using bond energies (BE)?
ΔHrxn=∑BE(bonds broken)−∑BE(bonds formed).

What type of calorimeter setup is shown in this diagram, and what thermodynamic quantity does it measure?
A constant-pressure (coffee cup) calorimeter, which directly measures enthalpy change (ΔH=qp).

What type of calorimeter setup is shown in this diagram, and what thermodynamic quantity does it measure?
A constant-volume (bomb) calorimeter, which directly measures internal energy change (ΔU=qv).
What is standard molar enthalpy of formation (ΔHf∘), and what is its value for an element in its most stable form?
It is the standard enthalpy change for the formation of 1 mole of a compound directly from its elements in their standard states. By definition, ΔHf∘=0 for an element in its most stable form.

How does this enthalpy diagram illustrate Hess's Law?
It demonstrates that the total enthalpy change for converting C(graphite) to CO2(g) ( ΔH∘=−393.5kJ ) is equal to the sum of the enthalpy changes of the individual intermediate steps ( −110.5kJ+(−283.0kJ)=−393.5kJ ).

What major global energy sources are shown in this breakdown chart?
Oil, Natural gas, Hydro-electric, Nuclear, Coal, and Other renewables.
How is energy defined in chemistry?
Energy is defined as the capacity to do work.
What are the two broad categories into which forms of energy are divided?
Kinetic energy (energy based on motion) and Potential energy (energy based on an object's position).
What is the SI unit of energy and its equivalent in base SI units?
The SI unit of energy is the Joule (J), defined as 1J=1kg⋅m2/s2.

What relationship between temperature and molecular speed distribution of N2 gas is depicted in this graph?
As temperature increases from 100K to 700K, the speed distribution broadens and the peak (most probable speed) shifts to higher speeds.
What equation expresses electrical potential energy between two charged ions?
Eelectrical=rkq1q2, where q1 and q2 are ion charges, r is distance in pm, and k=2.31×10−16Jpm.
How do heat and temperature differ?
Heat is the transfer of thermal energy between two bodies at different temperatures, whereas temperature is a measure of thermal energy.
What does the First Law of Thermodynamics state, and what is its universe energy equation?
Energy cannot be created or destroyed, only transferred from one form to another; ΔUuniv=ΔUsys+ΔUsurr=0.

What three types of thermodynamic systems are pictured here, and how are they defined?
Open system (exchanges mass and energy), closed system (exchanges energy but not mass), and isolated system (exchanges neither mass nor energy).
In system-based sign conventions, when are heat (q) and work (w) positive or negative?
Heat absorbed by the system (q>0) and work done on the system (w>0) are positive; heat released by the system (q<0) and work done by the system (w<0) are negative.
What distinguishes an exothermic process from an endothermic process?
An exothermic process gives off heat to the surroundings (q<0), while an endothermic process absorbs heat from the surroundings (q>0).
What is molar heat capacity (Cm) and how is heat transfer (q) calculated using it?
Molar heat capacity (Cm) is the heat required to raise the temperature of 1mol of a substance by 1∘C; q=nCmΔT.
What formula calculates pressure-volume work performed by an expanding gas at constant pressure?
w=−PΔV
What is a state function, and what are key examples of state functions?
A state function is a property determined solely by the current state of a system, regardless of path; examples include internal energy (U), pressure (P), volume (V), temperature (T), and enthalpy (H).
What happens to the sign of the enthalpy change (ΔH) when a chemical reaction is reversed?
Reversing a chemical reaction changes the sign of its enthalpy change (ΔH).
Is bond breaking endothermic or exothermic, and what is the formula for estimating reaction enthalpy from bond energies?
Bond breaking is endothermic (BE>0); ΔHrxn=∑BE(bonds broken)−∑BE(bonds formed).

What type of calorimeter is shown in this diagram, and what heat quantity does it measure at constant pressure?
A styrofoam cup (constant-pressure) calorimeter, where measured heat flow equals enthalpy change (qrxn=ΔH).

What device is shown in this diagram, and what thermodynamic quantity does it measure at constant volume?
A constant-volume bomb calorimeter, which measures heat flow at constant volume equal to internal energy change (qrxn=ΔU).
How are enthalpy change (ΔH) and internal energy change (ΔU) related for gas-phase reactions?
ΔHrxn≈ΔUrxn+RTΔngas
What is the standard enthalpy of formation (ΔHf∘) for an element in its most stable form?
0kJ/mol
How is the standard enthalpy of reaction (ΔHrxn∘) calculated using standard enthalpies of formation?
ΔHrxn∘=∑nproductsΔHf,products∘−∑nreactantsΔHf,reactants∘

What principle does this diagram represent regarding stepwise chemical reactions?
Hess's Law, which states that the overall enthalpy change for a stepwise process is equal to the sum of the enthalpy changes for each individual step.