1/237
Looks like no tags are added yet.
Crude oil elemental composition (C, H, S, O, N)
C 84-87 wt%, H 11-14 wt%, S 0.04-6 wt%, O 0.1-1.5 wt%, N 0.1-0.5 wt%
Heavy metals in crude (Ni, V)
20-200 g/t; concentrate in residues and poison conversion catalysts
Hydrocarbon classes in crude
n-paraffins, iso-paraffins, naphthenes, aromatics, naphtheno-aromatics, olefins
Saturated hydrocarbons are…
Paraffins and naphthenes (no double or triple bonds)
Unsaturated hydrocarbons are…
Olefins, diolefins, aromatics, naphtheno-aromatics
Are olefins found naturally in crude?
No. They are produced by cracking.
Why remove sulfur?
SOx emissions, corrosion (H2S, RSH), odor, catalyst and catalytic converter poisoning
Why remove nitrogen?
Basic N compounds poison acid catalysts; NOx formation on combustion
Naphthenic acids: effect
Oxygenated compounds that corrode crude distillation units; crude is acid if TAN > 1
TAN
Total Acid Number, mg KOH per g crude; acid crude if above 1
Asphaltenes
Heavy compounds insoluble in n-heptane (or n-pentane), soluble in hot toluene; contain S, N, O, Ni, V
Maltenes
Fraction of a residue soluble in n-heptane
Resins and peptization
Resins keep asphaltenes dispersed in solution and prevent flocculation
Conradson Carbon Residue (CCR)
Weight % of carbon residue after pyrolysis; indicates coking tendency of a heavy cut
API gravity formula
API = 141.5 / sp.gr.(15/15) - 131.5
LS and HS crude
Low sulfur and high sulfur (fuel oil LS is 1% S or less)
Naphthenic crudes come from…
West Africa and Venezuela
Brent
North Sea reference crude used to set prices in the European area
Refining margin
Sale price of products minus crude cost, about 2 to 4 $/bbl; covers variable, fixed and depreciation costs
Light naphtha
C5-C6; feed to isomerization
Heavy naphtha
C7-C10 (C7-C11), 100-180 C; feed to catalytic reforming
Kerosene cut
C10-C13; makes jet A1
Gasoil cut
C13-C20/25; diesel and heating oil
Atmospheric residue (long residue)
Non-vaporizable bottom of atmospheric distillation, C20/25+; feed to vacuum distillation
VGO boiling range
360-380 C to 540-600 C; main feed of conversion units
Vacuum residue
Non-vaporizable bottom of vacuum distillation; bottom of the barrel
Arabian Light yields: gas, naphtha, kerosene, gasoil, heavy cuts
1%, 22%, 9%, 27%, 41%
Main petroleum products
LPG, gasoline, jet fuel, diesel and heating oil, heavy fuel oil, bitumen, naphtha, lubes, waxes, coke
OPEC members listed in the glossary
Middle East: Iran, Iraq, Kuwait, Qatar, Saudi Arabia, UAE; Africa: Algeria, Libya, Angola, Nigeria; South America: Ecuador, Venezuela
Desalting: what and why
Water wash and electrostatic decanting remove salts and mud; salts cause corrosion, mud causes fouling
Demulsifier role
Promotes settling of water and crude before desalting
Atmospheric distillation pressure
Slightly above atmospheric (1 atm = 1.013 bar)
Crude furnace outlet temperature
About 350-370 C
Number of cuts from atmospheric distillation
4 to 8 petroleum cuts
Pumparound
Intermediate circulating reflux on a complex column
Why vacuum distillation?
Lower pressure lowers boiling points so VGO vaporizes without thermal cracking and coking
Vacuum column pressure
About 20-50 mmHg absolute
How is vacuum kept?
Ejectors using motive steam, or vacuum pumps
Reflux
Part of condensed overhead returned to the column top to create liquid-vapor countercurrent
Reboiler
Vaporizes part of the bottom liquid to create ascending vapor
Stripping
Removal of volatile components from a cut by heat or steam, in a column with trays or packing
ASTM distillation
Standard test giving IBP, EBP and % distilled at given temperatures
TBP distillation
True boiling point; mainly for crude oils; predicts yields and quality of cuts
Catalytic reforming goal
Convert naphthenes and paraffins to aromatics to raise octane; produces H2
Reforming feed
Desulfurized heavy naphtha C7-C10
Reforming temperature and pressure
490-530 C; 10-20 bar semi-regenerative, 3-10 bar CCR
Reforming catalyst
Bifunctional Pt-Re (semi-regenerative) or Pt-Sn (CCR)
Why interstage heating in reforming?
Naphthene to aromatics is very endothermic so temperature drops across each reactor
Reformate RON
98-102; aromatic-rich; also source of BTX
Semi-regenerative vs continuous (CCR) reforming
Semi-regen must shut down to regenerate catalyst; CCR regenerates catalyst continuously
Why hydrotreat naphtha before reforming?
S and N poison the platinum catalyst
Naphtha HDT conditions and catalyst
About 300 C, 10-30 bar, H2; Co-Mo or Ni-Mo sulfide on alumina
Isomerization goal and feed
Convert n-paraffins to iso-paraffins (higher RON); light naphtha C5-C6
Isomerization conditions
About 120-180 C, 20-30 bar, H2; Pt on chlorinated alumina or zeolite
Isomerate RON
83-90
HEXORB, IPSORB, MOLEX
Adsorption systems removing n-paraffins to recycle in isomerization
Alkylation reaction
Butenes + isobutane gives C8 iso-paraffins (alkylate)
Alkylation catalysts and temperatures
H2SO4 about 5-10 C (refrigeration needed); HF about 30-40 C
Alkylate properties
Very high octane, low vapor pressure, no aromatics, no olefins
Etherification
Isobutene + methanol gives MTBE; + ethanol gives ETBE; C5 olefin + methanol gives TAME
Sweetening (Merox, Sulfrex)
Converts aggressive mercaptans to disulfides (stay in the product)
Doctor test
Detects traces of mercaptans
Amines used in H2S washing
DEA, MEA, MDEA, DIPA; rich amine has high H2S, lean amine is regenerated
Claus unit
Converts H2S into elemental sulfur; tail gas treated in TGT (SCOT, SULFREEN)
Steam reforming
Makes hydrogen from steam and light hydrocarbons (H2 + CO)
Gas plant
Distillation columns separating C1-C4 gases (fuel gas, C3, C4) and gasoline
Splitter
Column separating two cuts (LPG splitter, PP splitter)
Gasoil HDS conditions
About 340-380 C, 30-60 bar; Co-Mo or Ni-Mo; reaches 10 ppm S diesel
Hydrotreating removes…
S (HDS), N (HDN), O (HDO), metals (HDM), and saturates olefins and aromatics
Octane number scale
n-heptane = 0, iso-octane = 100
RON vs MON; sensitivity
RON is usually higher; sensitivity = RON - MON
Octane (RON) of low, medium straight-run naphtha in scheme
Low 20-50, medium 60-80
Knocking
Abnormal combustion in a spark ignition engine; avoided by high octane number
MTBE
Methyl tert-butyl ether, from isobutene + methanol, high-octane blending stock
FCC goal
Convert heavy cuts (VGO, some residue) to gasoline, LPG, propylene
FCC feed
VGO with low metals; RFCC for residue (R2R, RCC)
FCC catalyst
Acid zeolite powder, fluidized, circulates between reactor and regenerator
FCC riser conditions
About 520-540 C, about 2 bar, seconds of contact
FCC regenerator
Burns coke with air at about 700 C; heat drives the endothermic cracking
FCC poisons from the feed
Ni and V (metals), nitrogen compounds; coke deactivates temporarily
FCC products
Fuel gas, LPG, propylene, FCC gasoline, LCO, HCO, slurry, coke
LCO
Light cycle oil; aromatic gasoil-type cut used to dilute fuel oil
Slurry
Heaviest FCC liquid effluent with catalyst fines; fuel oil base
CO boiler / CO promoter
CO boiler burns CO in regenerator flue gas; Pt promoter converts CO to CO2
Class definition of FCC conversion
100 - (LCO + slurry) yields
Hydrocracking goal
Convert heavy cuts to naphtha, kerosene, gasoil with H2
Hydrocracking conditions
350-440 C, 100-200 bar; exothermic, H2 quench
Bifunctional catalyst
Metal function (hydrogenation) + acid function (cracking)
Why pretreat before hydrocracking?
Remove S, N, metals; NH3 poisons the acid sites
Bleed
Unconverted heavy oil at hydrocracker outlet; recycled or sent to FCC or lubes
Mild hydrocracking
Hydrocracking of VGO at lower pressure and conversion
ARDS / VRDS
Atmospheric / vacuum residue desulfurization: HDS, HDN, HDM with partial conversion
Residue hydroconversion processes
H-Oil, HYVAHL (AXENS), HYCON (Shell), LC-Fining
Gradings
Guard layers at the top of a reactor bed protecting from plugging
Severity (catalytic processes)
Higher severity = more conversion, shorter catalyst cycle
Visbreaking
Mild thermal cracking of residue (about 430-480 C, soaker) to lower viscosity
Visbreaker products
Lower-viscosity fuel oil base plus a 165-375 C distillate used as diluent
Soaker
Drum at the visbreaker furnace outlet letting cracking develop
Delayed coker conditions
About 480-500 C, 2-4 bar, two coke drums
Why two coke drums?
One fills while the other is decoked with high-pressure water