Networking Fundamentals: Devices, Media, Switching, and Backbone Design

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/69

encourage image

There's no tags or description

Looks like no tags are added yet.

70 Terms

1
New cards

Network interface card (NIC)

Connects a device to the network medium. A wired NIC uses a cable connection. A wireless NIC sends and receives radio signals.

2
New cards

Network circuit

The communication path between network devices. It can use copper, fiber, or radio.

3
New cards

Unshielded twisted pair (UTP)

Common, inexpensive copper cabling. Twisting the wires reduces interference and crosstalk. The typical Ethernet copper channel limit is 100 meters.

4
New cards

Shielded twisted pair (STP)

Twisted copper pairs with added shielding for noisy electrical environments. Proper installation and grounding matter.

5
New cards

Fiber-optic cable

Sends light instead of electrical signals. It is immune to electromagnetic interference and is useful for high-speed or long-distance links.

6
New cards

Attenuation

A signal getting weaker as it travels.

7
New cards

Hub

A Layer 1 device that repeats an incoming signal to its other ports without reading the destination address. Devices share one collision domain.

8
New cards

Layer 2 switch

Learns source Media Access Control (MAC) addresses and forwards frames based on destination MAC addresses. It isolates the links on its ports.

9
New cards

Wireless access point (AP)

Bridges wireless devices to the wired local area network (LAN). It does not inherently route between networks.

10
New cards

Power over Ethernet (PoE)

Carries data and electrical power over the same Ethernet cable, so an access point may not need a separate power adapter.

11
New cards

Network operating system (NOS)

The server-side and client-side software supporting local network services such as file access and printing.

12
New cards

NOS server software vs. client software

Server software provides resources and responds to requests. Client software lets users discover and access those resources.

13
New cards

Directory service

A catalog of users, devices, and resources on a network. Microsoft Active Directory is an example.

14
New cards

Domain

A logical group of related directory objects such as accounts, computers, and resources.

15
New cards

Domain controller

A server that hosts directory information and handles domain authentication and authorization information.

16
New cards

Domain tree vs. forest

A tree organizes related domains hierarchically. A forest contains one or more domain trees.

17
New cards

Lightweight Directory Access Protocol (LDAP)

The protocol a client can use to query a directory. It is not the directory itself or the domain controller.

18
New cards

Network profile vs. user profile

In the course terminology, the network profile describes shared resources and who may use them. A user profile describes what a particular user can access.

19
New cards

Physical vs. logical topology

Physical topology is how the devices are wired. Logical topology is how data flows.

20
New cards

Hub-based Ethernet topology

Physical star because every device plugs into a central hub. Logical bus because all devices share the medium.

21
New cards

Switch-based Ethernet topology

Physical star and logical star because devices have individual point-to-point links to the switch.

22
New cards

Collision domain vs. broadcast domain

A collision domain is where simultaneous half-duplex sends can collide. A broadcast domain is the group that receives a local Layer 2 broadcast. One VLAN can span multiple switch links without sharing a collision domain.

23
New cards

How does a switch learn a MAC address?

It records the frame's SOURCE MAC address on the port where the frame entered. It looks up the DESTINATION MAC to decide where to forward.

24
New cards

Known unicast vs. unknown unicast

If the destination MAC is known, send the frame to its corresponding port. If unknown, flood it to eligible ports in the same VLAN except the incoming port. The destination address is still unicast.

25
New cards

What if two frames need the same switch output port?

The switch typically queues one while sending the other. Queueing is not a collision, although a full queue can lead to drops.

26
New cards

Cut-through switching

Starts forwarding after reading the destination address. Lowest latency of the three modes, but it may forward corrupt frames.

27
New cards

Store-and-forward switching

Receives the whole frame, checks the Frame Check Sequence, then forwards a valid frame. Can buffer between unlike link speeds.

28
New cards

Fragment-free switching

Reads the first 64 bytes before forwarding. Helps avoid forwarding short collision fragments but does not verify the entire frame.

29
New cards

Carrier Sense Multiple Access with Collision Detection (CSMA/CD)

For shared half-duplex wired Ethernet. Listen, transmit when idle, detect a collision, send a jam signal and stop, wait a random time, then retry.

30
New cards

Does full-duplex switched Ethernet need collision detection?

No. Both ends of a dedicated full-duplex link can send and receive at the same time without colliding.

31
New cards

10Base-T vs. 100Base-T vs. 1000Base-T

10 Mbps, 100 Mbps, and 1,000 Mbps (1 Gbps), respectively. T denotes twisted pair.

32
New cards

1000Base-T vs. 1000Base-F

Both are 1 Gbps. T uses twisted-pair copper. F is the course shorthand for gigabit fiber.

33
New cards

Data center vs. server farm

A data center houses primary servers and supporting equipment. A server farm is a group of servers, often handling the same workload.

34
New cards

Load balancer

Receives requests and distributes them among healthy backend servers. It can stop sending requests to a server that fails.

35
New cards

Server virtualization

Runs multiple logically separate virtual servers on one physical host. Improves hardware utilization, but host failure can affect multiple guests.

36
New cards

Storage Area Network (SAN) vs. Network-Attached Storage (NAS)

A SAN is a dedicated storage network, typically providing block storage. NAS is a network-connected device that serves files.

37
New cards

Bottleneck

The component currently limiting performance. Compare device utilization and link utilization during the slowdown before deciding what to upgrade.

38
New cards

Server at high utilization, links have room. What can help?

Tune network operating system cache or buffers, improve CPU, memory, or storage throughput, or spread work across additional servers.

39
New cards

Uplink at 98% with drops, server has headroom. What can help?

The uplink is the likely bottleneck. Upgrade its speed, add supported parallel capacity, or reduce the traffic crossing it.

40
New cards

Reducing LAN demand

Cache frequently accessed content at clients, install suitable software locally, or reschedule heavy jobs to off-peak hours.

41
New cards

Backbone network

A high-speed network that interconnects other networks.

42
New cards

Access vs. distribution vs. core

Access connects end devices. Distribution aggregates access LANs inside a building. Core connects building networks across campus in the course model.

43
New cards

Switch forwarding table vs. router routing table

A switch maps destination MAC addresses to ports. A router uses the destination IP address and its routing table to choose a next hop.

44
New cards

What changes at a router hop?

The router removes the old Layer 2 frame and creates a new one for the outgoing link. The final destination IP normally stays the same, and IPv4 Time to Live decreases.

45
New cards

Switched backbone

Common in the distribution layer. A central switch links LANs over separate point-to-point star connections.

46
New cards

Rack-mounted vs. chassis-based switched backbone

Rack-mounted uses separate devices centralized in a room and linked with patch cables. A chassis switch accepts plug-in modules in one enclosure.

47
New cards

Internal switching capacity formula (course convention)

Multiply the port count by the per-port speed for each group, then add the groups. Count both directions only if the question explicitly asks for it.

48
New cards

Four 24-port gigabit modules plus one gigabit uplink. What is the switching capacity?

97 Gbps. (4 × 24 × 1) + (1 × 1) = 97. If the problem explicitly counts both full-duplex directions, it is 194 Gbps.

49
New cards

Switching capacity with 24 one-gigabit ports, two 10-gigabit ports, and four 100 Mbps ports

44.4 Gbps. Add 24 × 1, 2 × 10, and 4 × 0.1. Convert to the same units before adding.

50
New cards

Routed backbone pros and cons

Routers connect separate subnets and keep local broadcasts contained. Tradeoffs include extra processing and more configuration and management.

51
New cards

Virtual local area network (VLAN)

A software-defined Layer 2 broadcast domain. It can be confined to one switch or span multiple switches.

52
New cards

VLAN benefits and drawbacks

Group users by function rather than location, contain broadcasts, and support traffic prioritization. Setup and troubleshooting add complexity and may add cost.

53
New cards

VLAN ID vs. IP subnet

VLAN ID identifies a Layer 2 segment. An IP subnet is a Layer 3 address range. In the course scenarios, each VLAN has its own subnet.

54
New cards

Access port vs. trunk port

An access port normally serves one VLAN and sends untagged frames to the attached host. A trunk carries multiple VLANs between switches, normally using IEEE 802.1Q tags.

55
New cards

What does an IEEE 802.1Q tag carry?

It can identify the VLAN and include a priority marking for Quality of Service. The tag is typically removed before a frame is sent out a regular access port.

56
New cards

S1, S2, and S3 in the course VLAN diagram

These are switch labels, not VLAN IDs. The router is attached to S1. Trunk A connects S1-S2, trunk B connects S2-S3, and trunk C connects S1-S3.

57
New cards

Same subnet and same switch. How does a frame travel?

The sender addresses the destination host's MAC. The switch forwards to the local port. No trunk or router is needed.

58
New cards

Same subnet, different switches. How does a frame travel?

The sender still uses the destination host's MAC. Switches forward the frame over the trunk in that VLAN. No routing is needed.

59
New cards

Different subnet, same switch. Does a router still matter?

Yes. The first frame targets the gateway's MAC. The router creates a new frame for the destination VLAN, even though the destination host is on the original switch.

60
New cards

Trace 179.58.10.102 on S2 to 179.58.11.20 on S3 (both /24)

Different subnets. S2 → trunk A tagged VLAN 10 → S1 → router → S1 → trunk C tagged VLAN 30 → S3 → destination.

61
New cards

Off-subnet transmission: destination IP vs. first destination MAC

The packet's destination IP is the final host. The first Ethernet frame's destination MAC belongs to the default gateway.

62
New cards

Address Resolution Protocol (ARP) broadcast in VLAN 10

It is flooded on eligible VLAN 10 ports and trunks, but it does not cross into VLAN 20 or 30. A router can receive it on its VLAN 10 interface without forwarding it to other VLANs.

63
New cards

Does a switch with an empty forwarding table ignore VLAN boundaries?

No. It learns the source MAC in its VLAN and floods an unknown unicast only within that VLAN. VLAN and trunk configurations are separate from learned addresses.

64
New cards

Backbone performance: improve devices

Use faster forwarding hardware, provide adequate buffer memory, or choose a routing protocol that fits network size and topology.

65
New cards

Backbone performance: improve circuit capacity

Upgrade overloaded links or add parallel capacity with supported load sharing. Focus on the congested uplink or server-facing link.

66
New cards

Backbone performance: reduce demand

Contain unnecessary broadcasts, schedule large transfers off-peak, or move frequently accessed content closer to users.

67
New cards

Access control list (ACL)

An ordered set of permit and deny rules applied by a router or capable switch. Rules can match source and destination IP and, where supported, protocol or port.

68
New cards

ACL rule order example

If a broad deny is above a more specific permit for the same traffic, the deny wins in a first-match ACL. Put the intended exception first.

69
New cards

Implicit deny

In a default-deny ACL, traffic that matches no explicit rule is blocked.

70
New cards

Can a router ACL filter traffic that never crosses the router?

No. An ACL only sees traffic at its enforcement point. Same-VLAN traffic staying on a switch does not pass the router's ACL.