1/23
Looks like no tags are added yet.
Denture Base
The part of a denture that rests on the foundation tissues and to which teeth are attached
Masticatory function, Esthetic or cosmetic function, Stimulation of the underlying tissue
Primary function of denture base
Tooth supported partial denture base.
Tooth tissue borne partial denture base.
Types of denture base according to support
Tooth Supported Partial Denture Base
the denture base is primarily a span between two abutments supporting teeth.
thus the occlusal forces are transferred directly to abutment teeth through rests; and, the denture base and the supplied teeth serve to prever horizontal migration of all of the abutment teeth in partially/ edentulous arch and vertical migration of teeth in opposing arch.
Tooth Tissue Borne Partial Denture Base
the denture bases must contribute to the support of the denture and in improving prosthesis stability.
Maximum support from the residual ridge may be obtained by using broad, accurate denture bases, which spread the occlusal load equitably over the entire area available for such support (snowshoe principle).
Support
primary consideration in selecting, designing, and fabricating a distal extension partial denture base.
Using broad denture base
Using accurate denture base
By this maximum support from the residual ridge may be obtained
Using mesial rest on the last abutments.
Using indirect retainers.
Using special type of direct retainers, the first choice is R.P. system, second choice is bar, and the third choice is combination clasp.
Relining the finished free end extension partial denture before insertion inside patient mouth.
Using special kind of impression technique called altered cast technique
Using implant to support the denture base.
Management of distal extension cases
Resin Type (acrylic denture base)
Metal type denture base
Types of the denture base according to materials
Resin type (acrylic denture base)
most widely used type of denture base because of ease of fabrication and easy attachment to metal framework.
It is attached to metal framework by mechanical mean (through the hole present in meshes or ladder area)
Distal extension ridges, Long span ridges, In cases of immediate partial denture
the resin denture base have the advantage of future relining or rebasing, therefore, it is the main choice in (Indications)
Distal Extension (CI I and CI II)
The resin denture base is indicated for this cases because of the support of the denture by tissue and there will be continuous bone resorption creating a space between residual ridge and denture base, so there will be a need for relining
Long span ridges (CI I and CI II)
The resin denture base is indicated for this cases because of possibility of tissue changes underneath the denture base and there will be need for future relining.
In cases of immediate partial denture
The resin denture base is indicated for this cases since after healing period there will be need for relining, a resin denture base is needed for such cases.
Gold and platinum, Stainless steel or chrome cobalt, titanium
Materials made of for Metal type denture base
metal type denture base
has the ability to stimulate the underlying tissues that will maintain the integrity of the bone by preventing osseous tissue resorption, but, the principal disadvantage, is its difficulty to reline in the future
Short span (tooth borne removable partial denture).
When there is no enough space for artificial teeth (inadequate intermaxillary space) because of over eruption of the opposing teeth
Metal type denture base indications
Accuracy and permanency of form, Comparative tissue response, Thermal conductivity, Weight and bulk
Advantages of Metal Denture Base
Difficult to reline and rebase, Expensive, The error that occur in posterior palatal seal area (post dam) can't be corrected with metal denture base, while if same error occurred in resin denture base repostdaming is the choice for this problem.
Disadvantages of metal denture base
Acrylic teeth, Porcelain teeth, Metal teeth
Types of artificial teeth
Porcelain teeth
Is made of feldspathic porcelain material.
Attached to denture base by mechanical mean, either by pin that will be processed in denture base and a hole present at the base of the tooth allowing its attachment by cementation
Porcelain teeth
Is made of feldspathic porcelain material.
Attached to denture base by mechanical mean, either by pin that will be processed in denture base and a hole present at the base of the tooth allowing its attachment by cementation
Metal teeth
Some cases on the anterior or posterior teeth may be processed as part of the denture base by casting procedure. This is indicated in cases of limited intermaxillary spaces.
Modified Poly-eiher-ether-ketone (PEEK)
A new material in prosthodontics. Comparing to the metals used in dentistry:
An alternative material for the fabrication of distal extension removable dental prosthesis (RDP)
frameworks.
This material can be used for patients allergic to metals, or who dislike the metallic taste, the weight, and the unpleasant metal display of the denture framework and retentive clasps.
A biocompatible, nonallergic, rigid material, with flexibility comparable to bone, high polishing and low absorption properties, low plaque affinity, and good wear resistance.
Can be constructed either via CAD/CAM
manufacturing or via the conventional lost wax technique.