1/21
Looks like no tags are added yet.
RStoic
reactor block that outputs based on specified reactions with known % conversion or extent of reaction
RYield
reactor block that outputs based on specific yields;
does not require/model reactions or stoichiometry
REquil
reactor block that outputs based on phase equilibrium and reaciton equilibrium of specified reactions;
» when you know the equilibrium ocnstant or can calculate it using Gibbs free energy
RGibbs
reactor block that outputs at equilibrium based on minimum ΔG;
does not require/model reactions or stoichiometry, will just minimize ΔG
» may not be possible to perform at certain temperatures or within a reasonable amount of time (kinetically)
RCSTR
reactor block that models CSTR with specified reactions and kinetics;
» requires and models reaction kinetics to determine size of reactor or residence time
RPlug
reactor block that models PFR with specified reactions and kinetics
» requires and models reaction kinetics to determine size of reactor or residence time
RBatch
reactor block that models batch reactor with specified reactions and kinetics
» requires and models reaction kinetics to determine size of reactor or residence time
GLHHW
general langmuir-hinshelwood allows you to specify rate expression units more easily
general, powerlaw
selecting this reaction type, then this reaction class gives more options to define the units for concentration, etc.
packed bed reactor
cylindrical bed filled with catalyst pellets:
simply design
difficult to control uniformity
difficult to maintain
trickle bed reactor
reactants go over the catalyst with void spaces between
similar to packed bed
vapor + liquid mixture phase
moving bed reactor
the catalyst moves, typically countercurrent against the reactants
can regenerate catalyst
manage heat better
have to move the catalyst
fluidized bed reactor
the particles are in constant motion, with a lot of space in between
easier to have uniform T + composition
easier to maintain
may be hard to fluidize
larger contact area
slurry reactor
the catalyst moves with liquid, can be thorugh a tube or in a stirred tank
easier heat recovery
more uniform T + composition
high viscosity may increase difficulty mixing
autothermal reactor
reactor that operates without external heating or cooling by using internal heat generation (exothermic/endothermic reactions or heat exchange with incoming feed)to sustain its reaction temperature
partial condenser
a block that has an input of vapor and liquid is generated
partial reboiler
a block that has an input of liquid and vapor is generated
flash tank
a reactor that has a liquid input that is evaporated by a suddent drop in pressure
Vg
volume per gram of catalyst
Vp
volume of catalyst particle
Sg
surface area per gram of catalyst
Sx
surface area of catalyst particle