1/60
Looks like no tags are added yet.
The two competing hypotheses used in hypothesis testing are called the _______ hypothesis and the _______ hypothesis.
null, alternative
Hypothesis testing enables us to determine if the collected ______ data is inconsistent with what is stated in the null hypothesis.
sample
We use the alternative hypothesis as a vehicle to establish something
new
The alternative hypothesis for a two-sided test for a population mean would be denoted as
HA: μ ≠ μ0
Specify the competing hypotheses that would be used in order to determine whether the population mean is less than 150.
H0: μ ≥ 150 and HA: μ < 150
An alternative hypothesis
contradicts the status quo
Which one of the following is NOT a step we use when formulating the null and alternative hypotheses?
Calculate the value of the sample statistic.
The hypothesis testing procedure enables us to make one of _____ decisions.
two
A Type I error occurs when we...
reject the null hypothesis when it is actually true
The null hypothesis is specified by using one of the following signs:
=, ≤, or ≥
An auditor for a small business wants to test the assumption that the mean value of all accounts receivable differs from $550. She takes a sample of 40 accounts and calculates the sample mean and the sample standard deviation. The null and alternative hypotheses for this test are
H0: μ = $550 and HA: μ ≠ $550
Specify the competing hypotheses that would be used in order to determine whether the population proportion is greater than 0.35.
H0: p ≤ 0.35 and HA: p > 0.35
Not rejecting a true null hypothesis.
correct decision
In general, we follow three steps when formulating the competing hypotheses. Place these steps in the correct sequence.
1. Identify the population parameter of interest.
2. Determine whether it is a one-tailed or two-tailed test.
3. Include some form of the equality sign in the null hypothesis.
Match these terms with their meanings.
Instructions
α - The probability of a Type I error.
β - The probability of a Type II error.
If we reject the null hypothesis when it is actually false we have committed...
no error.
The optimal values of Type I and Type II errors require a compromise in balancing the costs of each type of error.
True
In a hypothesis test, μ0 and p0 are hypothesized values of the ______ mean and the ______ proportion, respectively.
population, population
A hypothesis test regarding the _______ mean is based on the sampling distribution of the ______ mean.
population, sample
There are two equivalent methods to test a hypothesis: the p-value approach and the _____ ______ approach.
critical value
Rejecting a false null hypothesis.
correct decision
The test statistic when the population standard deviation is know is z = x−μ0σ/ σ/n√ . Match each term to its meaning.
Z - The test statistic
x - The sample mean.
μ0 - The hypothesized mean.
σ - The population standard deviation.
n - The sample size.
For a given sample size n, α can only be reduced...
at the expense of increasing β.
When performing a hypothesis test on μ, the p-value is defined as the
observed probability of making a Type I error.
Typically, the decision regarding the optimal level of Type I and Type II errors is made by the
management
The significance level is the probability of making
a Type I error.
The basic principle of hypothesis testing is to first assume that the ______ hypothesis is true and then determine if the sample data _______ this assumption.
null, contradict
Match these alternative hypotheses with their p-value calculations.
HA: μ > μ0 - Right-tail probability: P(Z ≥ z).
HA: μ < μ0 - Left-tail probability: P(Z ≤ z)
HA: μ ≠ μ0 - Two-tail probability: 2P(Z ≥ z) if z > 0 or 2P(Z ≤ z) if z < 0
The p-value approach to hypothesis testing has ____ steps.
four
When testing μ and σ is known, H0 can never be rejected if z ≤ 0 for a
right-tailed test.
The test statistic when the population standard deviation is know is z = x−μ0/σ/n√. This formula is valid only if X follows a ______ distribution.
normal
The p-value is the likelihood of obtaining a sample mean that is at least as _______ as the one derived from the given sample, under the assumption that the null hypothesis is true as an equality.
extreme
The p-value is referred to as the ______ probability of making a Type I error.
observed
We reject H0 if the p-value is ______ ______ alpha.
less than
When performing a hypothesis test on μ when σ is known, H0 can never be rejected if
z ≥ 0 for a left-tailed test.
Consider the following competing hypotheses: H0: μ = 150 versus HA: μ ≠ 150. If a 95% confidence interval is [100, 200], then we cannot reject the null hypothesis at the 5% significance level.
True
An important final conclusion to a statistical test is to...
clearly interpret the results in terms of the initial claim.
When performing a hypothesis test on μ when the value of σ is unknown, the test statistic is computed as x−μ0 /s/n√ and it follows the
tdf distribution with (n - 1) degrees of freedom.
We refer to 100α% as the
significance level
As a point estimate of the population proportion, we calculate ______.
p
Consider the following competing hypotheses: H0: μ = 10 versus HA: μ ≠ 10. If a 95% confidence interval is [15, 20], then at the 5% significance level we
reject the null hypothesis and conclude that the population mean appears to differ from 10.
It is not sufficient to end the analysis with a conclusion that you reject the null hypothesis or you do not reject the null hypothesis. You must ______ the results.
interpret
Which of the following requirements must be met in order to approximate P using the normal distribution?
n(1-p) > 5
np > 5
If the population standard deviation is unknown, it can be estimated by using ______.
s
E(P) =
p
Unlike the mean and standard deviation, the population proportion p is a descriptive summary measure that can be used for data that are
qualitative
Which of the following is NOT a step in the p-value approach to hypothesis testing?
Graph the distribution of the sample data.
We always use ______ evidence and the chosen significance level α to conduct hypothesis tests.
sample
Consider the following competing hypotheses: H0: μ = 10 versus HA: μ ≠ 10. If a 95% confidence interval is [8.25, 11.55], then at the 5% significance level we
do not reject the null hypothesis and conclude that the population mean does not significantly differ from 10.
The critical value approach specifies a region of values, called the ______. If the test statistic falls into this region, we reject the ______.
rejection region, null hypothesis
The normal distribution approximation for a binomial distribution is valid when
np ≥ 5 and n(1 - p) ≥ 5
The conclusions of a hypothesis test that are drawn from the p-value approach versus the critical value approach are
always the same.
Which of the following statements is NOT correct concerning the p-value and critical value approaches to hypothesis testing?
Both approaches use the same decision rule concerning when to reject H0.
Suppose the competing hypotheses for a test are H0: μ ≤ 10 versus HA: μ > 10. If the value of the test statistic is 1.90 and the critical value at the 1% level of significance is z0.01 = 2.33, then the correct conclusion is:
Do not reject H0 and conclude that the population mean does not appear to be greater than 10 at the 1% significance level.
The critical value of a hypothesis test is
the value that separates the rejection region from the non-rejection region.
A binomial distribution can be approximated by a _____ distribution for large sample sizes.
normal
If the value of the test statistic falls in the rejection region, then the p-value must be
less than α.
Suppose you are performing a hypothesis test on μ and the value of σ is known. At the 5% significance level, the critical value(s) for a two-tailed test is (are):
-z0.025 and z0.025
Given a right-tailed hypothesis test, if the value of the test statistic is 1.82 and the critical value is 1.645, then we do not reject the null hypothesis.
False
Suppose you are performing a hypothesis test on μ and the value of σ is known. At the 5% significance level, the critical value(s) for a right-tailed test is (are):
z0.05
Suppose you are performing a hypothesis test on μ and the value of σ is known. At the 10% significance level, the critical value(s) for a left-tailed test is (are):
-z0.10