Week 4 Liquid State Forming

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/25

encourage image

There's no tags or description

Looks like no tags are added yet.

26 Terms

1
New cards

Three main methods of metal forming

Liquid forming, plastic forming and solid

2
New cards

What is liquid state forming (casting)?

Melting metal and pouring it into a mold to create a desired shape

3
New cards

Advantages and disadvantages of casting

Economical for complex shapes but can produce porosity, warpage and other defects

4
New cards

What is wrought iron?

Iron with very low carbon content, traditionally containing slag inclusions that create a characteristic grain

5
New cards

How is cast iron produced?

Melted in a cupola furnace and poured into a mold

6
New cards

What are the main components of a sand casting mold?

Cope is the top half; drag is the bottom half; core creates internal cavities; sprue carries molten metal into the mold; riser supplies extra molten metal to compensate for shrinkage

7
New cards

What are draft angles used for in sand casting?

Slight tapers that allow the pattern to be removed from the mold without damaging it

8
New cards

What are the four main types of cast iron?

Gray iron, ductile iron, malleable iron and white iron

9
New cards

What are the properties of gray iron?

General

10
New cards

What are the properties of ductile (nodular) iron?

Higher strength and ductility than gray iron but generally less machinable

11
New cards

What are the properties of malleable and white iron?

Malleable iron is heat treated to improve ductility; white iron is hard and abrasion resistant

12
New cards

When are steel castings used?

When cast iron cannot provide sufficient toughness or strength for the application

13
New cards

What is solidification?

The process of molten metal cooling and transforming into a solid

14
New cards

What are nucleation and dendrites?

Nucleation is the formation of initial solid crystals; dendrites are branching crystal structures that grow during solidification

15
New cards

What is the difference between columnar and equiaxed grains?

Columnar grains are elongated; equiaxed grains are more uniform in shape

16
New cards

How does cooling rate affect grain structure?

Rapid cooling generally produces finer grains; slow cooling generally produces coarser grains

17
New cards

How can casting design reduce solidification defects?

Maintain uniform wall thickness and use gradual tapers to encourage more uniform cooling

18
New cards

What is centrifugal casting?

Molten metal is poured into a rotating mold, using centrifugal force to distribute the metal

19
New cards

What is investment casting?

A wax pattern is coated in ceramic or plaster; the wax is melted out before molten metal is poured in

20
New cards

What is shell molding?

A sand

21
New cards

What are permanent molds?

Reusable molds, commonly made from cast iron, used for repeated casting

22
New cards

What is die casting?

Molten nonferrous metal is forced into a reusable metal mold under pressure

23
New cards

What are the advantages of die casting?

Good surface finish, thin walls and tight dimensional tolerances

24
New cards

What are the six factors for selecting a casting process?

Tolerances and shrinkage, surface finish, size and weight, material and castability, cost and production volume, availability and lead time

25
New cards

How does production volume influence casting selection?

Die casting suits high volumes; investment casting suits hundreds of parts; sand and centrifugal casting suit lower volumes

26
New cards

How do casting, machining, weldments and 3D printing differ as manufacturing choices?

Select based on geometry, material, tolerances, production volume, cost and lead time