1/29
Looks like no tags are added yet.
the ___ is the curved part of the dental dam clamp visible in the mouth once the dam material has been placed
bow
the end of the HVE tip is ____ so that it is positioned parallel to the site for better suction
beveled
the dental dam is ____ around each tooth to create a seal to prevent the leakage of saliva
inverted
the ___ is the part of the dental dam clamp that is stabilized around the anchor tooth
jaw
the dam punch has a ____, which is a sharp pointed tool used for cutting
stylus
an instrument is said to be ___ when it can be adapted or adjusted to multiple areas of the dentition
universal
when tooth #4 is overlapping tooth #5, it is considered to be
malaligned
a ___ is the piece of the dental dam between each pair of punched holes
septum
when a tooth is visible in the dental dam, it becomes
exposed
means to inhale an object or material
aspirate
the two types of evacuation systems used in dental procedures are
high-volume suction and saliva ejector
the main function of the saliva ejector is to
remove saliva and water
HVE suction tips are made from
stainless steel and plastic
the type of rinsing technique used throughout a dental procedure is the
limited
what method of isolation could be used for sealant placement
dry angles and cotton roll
which technique provides a moisture-free isolation for the restoration of a class IV composite resin
dental dam
why is it important to moisten a cotton roll before removing it from the mouth
the cotton roll may irritate the lining mucosa
teeth that become visible after the dam material is placed are referred to as being
exposed
what piece of equipment stabilizes and stretches the dam away from the face
dental dam frame
if you are unable to slide the dam material interproximal, what can be used on the underside of the dam to help in the application
water-soluble lubricant
what hole size is punched in the dental dam for the anchor tooth
5
which cavity classification would indicate the use of an anterior dental dam clamp
class V on tooth #7
the assistant uses the ___ grasp when holding the HVE
pen and thumb-to-nose
the dentist is preparing a class V restoration on the buccal surface of tooth #5; the HVE tip would be positioned on the
distal lingual surface of the tooth
the rationale for inverting the dental dam is to
prevent saliva leakage
the working end of the HVE tip should be positioned ___ the occlusal surface of the tooth being prepared
slightly beyond
the ___ is used to create holes in the dental dam to expose the teeth for isolation
dental dam punch
what is secured on the dental dam clamp before positioning on the patient's tooth
dental floss
the equipment used to perform a limited rinse includes
air-water syringe and HVE
the operator has positioned the high-speed handpiece on the occlusal surface of tooth #4. Where should the HVE be positioned
lingual surface of tooth #3