1/19
Looks like no tags are added yet.
Boyle’s Law
describes the relationship between the pressure and volume of a gas when the temperature and amount of gas are kept constant.
P1V1 = P2V2 PV=K
Pressure (P) and volume (V) have an inverse (indirect) relationship.
If pressure increases, volume decreases.
If pressure decreases, volume increases.
Charles’s Law
describes the relationship between the temperature and volume of a gas when the pressure and amount of gas are kept constant.
V1/T1 = V2/T2 So V1T2 = V2T1 (V) / (T)=K
TEMP MUST BE IN KELVIN (C + 273.15)
Temperature (T) and volume (V) have a direct relationship.
If temperature increases, volume increases.
if temperature decreases, volume decreases.
Gay-Lussac’s Law
describes the relationship between the temperature and pressure of a gas when the volume and amount of gas are kept constant.
P1/T1 = P2/T2 so P1T2 = P2T1 (P) / (T)=K
TEMPERATURE MUST BE IN KELVIN (C + 273.15)
Temperature (T) and pressure (P) have a direct relationship.
If temperature increases, pressure increases.
If temperature decreases, pressure decreases.
Avogadro’s Law
describes the relationship between the amount of gas and the volume of a gas when the temperature and pressure are kept constant.
V1/N1 = V2/N2 So V1N2 = V2N1
Amount of gas (n) and volume (V) have a direct relationship.
If the amount of gas increases, volume increases.
If the amount of gas decreases, volume decreases.
POSTULATES OF THE KINETIC MOLECULAR THEORY
Gasses consist of tiny particles (atoms or molecules)
These particles are so small compared with the distance between them that the volume (size) of the individual particles can be assumed to be negligible (zero).
The particles are in constant random motion, colliding with the walls of the container. These collisions with the walls cause the pressure exerted by the gas.
The particles are assumed to not attract or repel each other.
The average Kinetic energy of the gas particles is directly proportional to the kelvin (absolute) temperature of the gas.
Combined Gas Law
(P1)(V1) / (n1)(T1) = (P2)(V2) / (n2)(T2)
(P)(V) / (T)=K
cancel out constants according to the question on both sides, then cross multiply. Then, solve for what the question asks by plugging in given values.
GRAHAM’S LAW OF EFFUSION
Effusion is inversely proportional to the square root of its molar mass.
At same temp and pressure…
Lower molar mass effuses faster
Higher molar mass effuses slower
Graham’s Law Equation:
Ra/Rb = √(MMb)/(MMa)
R=rate of effusion
MM=Molar Mass
What is Effusion?
Process by which gas particles escape though a very small opening
Ex. A pinhole
How to calculate questions like “How much faster is the speed of ____ (H2 in this example) than the speed of ____ (CO2 in this example)?” Using Graham’s Law of Effusion?
To calculate molar mass…
Multiply… (# of atoms)(atomic mass of element)
ex. MM of CO2 = (C) + (O2) = (12.01) + 2(16.00) =44.01
Ex. MM of H2 =(2)(1.01)=2.02
Ra/Rb = √(MMb)/(MMa)
So R(H2)/R(CO2) = √(MM{CO2})/(MM{H2})
= 4.67 so H2 is 4.67 times faster than CO2.
Dalton’s Law of Partial Pressure & Mole Fraction
DALTON’S LAW OF PARTIAL PRESSURE:
Relates partial pressure of gases to the total pressure of mixture
P(Total) = P(1) + P(2) + P(3) + …
MOLE FRACTION:
Fraction of the total amount of gas or pressure contributed by one gas in the mixture.
Fraction of Total Amount of Gas:
X(A) = n(A) \ n(total)
Fraction of the Total Amount of Pressure
X(A) = P(A) \ P(total)
A mole fraction must ALWAYS be less than 1.
Ideal Gas Equation
Relates pressure (P), temperature (T), volume (V), and amount of gas (n).
PV=nRT
P= pressure of gas (kPa or atm)
V= volume of gas (L) has to be in Liters (convert)
n=amount of gas (mol)
T= temperature of gas (K) has to be in Kelvin (convert)
R=the ideal gas constant (a proportionality constant that has the same value for all gasses)
0.081 (L•atm)/(mol•K)
8.314 (L•kPa)/(mol•K)
Depending on the unit of pressure (kPa or atm), the R-value changes.
Standard Conditions
273 K
1 atm or 101.3 kPa
1atm=760.0mmHg = 76cmHg = 101.325 kPa = 101.325 Pa = 29.9Hg
Gas Law Calculations Reminders
Temperature must in Kelvin
R= (8.314) x(L)(kPa) / (mol)(K)
R= (0.0821) x(L)(atm) / (mol)(K)
R=(62.4) x(L)(torr) / (mol)(K)
Units must be the sameeee
Ideal gas law- R-value changes depending on pressure unit
Volume must always be in L (convert if necessary)
1 cm³ = 1 mL
1 dm³ = 1,000 mL or 1 L
Henry’s Law of Solubility
Amount of gas (solubility) is directly proportional to the pressure of the gas above the liquid when temperature is constant.
Higher pressure = more gas dissolves
Lower pressure = less gas dissolves
DIRECT relationship
Henry’s law of solubility formula:
P1 / S1 = P2 / S2 so P1S2 = P2S1
ORRR S=KhP
P=pressure
S=solubility
H=Henry’s Law constant
Why do molecules with partial charges attract neighboring molecules?
Opposite charges attract. Regions of partial positive (S+) charge on one molecule are drawn to regions of partial negative (S-) charge on another.
What determines the strength and number of intermolecular attractions?
The molecular structure (shape and types of atoms/groups) of the molecule.
How does the number of -OH groups affect intermolecular attractions?
Molecules with several -OH groups form more intermolecular attractions with nearby molecules than molecules with only one -OH group.
How do strong or numerous intermolecular attractions affect evaporation rate?
They make it harder for liquid particles to escape into the gas phase, causing the liquid to evaporate more slowly.
How do strong or numerous intermolecular attractions affect temperature change during evaporation?
Because evaporation occurs more slowly, the liquid shows a smaller temperature decrease (less evaporative cooling).