1/49
Vocabulary flashcards covering key forensic concepts from Chapters 9, 10, 11, and 14, including glass fractures, trace analysis, hair and fiber morphology, firearms examination, and impression recovery.
Physical property
A property that is observed or measured without changing the chemical identity of a substance, such as color, density, or refractive index.
Chemical property
A characteristic that describes how a substance reacts to form different substances, such as flammability or oxidation.
Intensive property
A property that is independent of the amount of sample present, such as density or refractive index.
Density
The ratio of mass to volume, expressed as Density=volumemass, with typical units of g/cm3 or g/mL.
Refraction
The bending of light when it crosses between media because its speed changes.
Refractive index (n)
The ratio calculated as n=speed in materialspeed of light in vacuum.
Dispersion
The separation of colors that occurs because refractive index varies with wavelength.
Birefringence
The presence of two refractive indices associated with different vibration directions in an anisotropic material.
Ordinary glass
An amorphous, noncrystalline solid composed mainly of silica (SiO2) from sand, combined with soda to lower melting temperature and lime to improve durability.
Tempered glass
Glass strengthened by heating and rapid cooling that tends to break into small fragments rather than large shards.
Laminated glass
A type of glass constructed with glass layers bonded around a plastic interlayer that holds fragments in place when broken.
Float glass
Flat glass manufactured by floating molten glass on molten tin.
Borosilicate glass
A boron-containing glass formulated to be resistant to thermal shock.
Radial fractures
Fractures in glass that radiate outward from the point of impact like spokes.
Concentric fractures
Glass fractures that curve around the point of impact.
3R rule
A forensic rule stating that Radial cracks form Right angles on the Reverse side of the force.
Flotation method
A density-comparison technique where glass fragments are suspended in a liquid of adjusted density; a fragment sinks if denser, floats if less dense, and remains suspended when densities match.
Immersion method
A refractive index comparison method in which a glass fragment is placed in a liquid and its boundary or Becke line is observed until matching refractive indices make the boundary difficult to see.
ICP-MS
Inductively coupled plasma mass spectrometry; an analytical technique used to measure trace elemental profiles in glass or metal samples.
Pigment
A paint component responsible for providing color and opacity.
Binder / resin
A paint component that forms the film and binds the pigment to the surface.
Solvent / carrier
A liquid component of paint that enables application and usually evaporates during the drying process.
PDQ (Paint Data Query)
An automotive paint database used to help narrow down the possible make, model, and year of a vehicle.
Soil
A forensic mixture composed of mineral particles, organic matter, water, and air, often containing debris such as pollen, glass, or paint.
Mineral
A naturally occurring inorganic solid with an ordered crystal structure and a characteristic chemical composition.
Anagen phase
The active growth phase of hair in which the root is growing and attached to the follicle.
Catagen phase
The transition phase of hair growth during which hair growth stops and the follicle shrinks.
Telogen phase
The resting phase of hair growth where a club-shaped root develops and hair may shed naturally.
Cuticle
The outer protective layer of hair composed of overlapping scales.
Cortex
The main body of the hair shaft that contains pigment granules and provides strength and color.
Medulla
The central core of a hair, which may be continuous, interrupted, fragmented, or absent.
Imbricate scales
Flattened, overlapping shingle-like scales found on the cuticle, typical of human hair.
Follicular tag
Translucent tissue attached near the root of a forcibly removed hair that contains nucleated cells for nuclear DNA testing.
Natural fibers
Fibers derived from plant (such as cotton), animal (such as wool), or mineral sources.
Regenerated fibers
Manufactured fibers, such as rayon, that are produced by chemically and industrially processing natural cellulose.
Synthetic fibers
Manufactured fibers synthesized entirely from chemical polymers, such as polyester, nylon, acrylic, and spandex.
Thin-layer chromatography (TLC)
The analytical method used to separate and compare dye components extracted from fibers.
Firearms identification
The discipline focused on examining bullets, cartridge cases, and tool marks to determine if they were fired by a specific firearm or the same unknown firearm.
Cartridge
A complete unit of ammunition composed of four principal components: case, primer, propellant, and projectile.
Rifling
Spiral lands and grooves machined inside the barrel of a firearm to impart spin and stabilize the projectile.
Caliber
The bore diameter of a rifled firearm, typically expressed in hundredths or thousandths of an inch or in millimeters.
Gauge
A traditional measure of shotgun bore size based on the number of bore-sized lead balls that equal one pound.
Class characteristics (firearms)
Shared manufacturing design features that narrow evidence to a group of firearms, including caliber, number and width of lands and grooves, and twist direction.
Individual characteristics (firearms)
Fine, random microscopic striations or imperfections on a tool or firearm surface produced by wear, damage, or manufacturing variations.
IBIS
Integrated Ballistic Identification System; an imaging and searching system for ballistic evidence.
Gunshot residue (GSR)
Unburned and partially burned residues produced by primer, propellant, and other firearm components during discharge.
Modified Griess test
A chemical garment test used to detect nitrites associated with propellant residue around bullet holes.
Sodium rhodizonate test
A colorimetric chemical test used on garments to detect the presence of lead residue from firearm discharge.
Electrostatic lifting
A technique used to preserve and recover dust impressions from surfaces following photographic documentation.
SICAR
A specialized software database system utilized for shoeprint image capture, reference, and comparison.