PDD Exam 4

0.0(0)
Studied by 1 person
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/203

encourage image

There's no tags or description

Looks like no tags are added yet.

204 Terms

1
New cards

ointments

— are made up predominantly (over 50%) with oily or waxy ingredients such as hydrocarbons, waxes, and polyols; classified by the type of base that it has

2
New cards

hydrocarbon

two of the most common — ointment bases include White Petrolatum, USP and White Ointment

3
New cards

lipophilic, occlusive, emolliment, stability

hydrocarbon bases are highly — bases, only a small amount of aqueous ingredients can be added, the major advantage of these bases is that they are — (keep air and water out) and are — (keep water vapor in the skin) forming a barrier; these bases also have strong —

4
New cards

absorption

— bases are also lipophilic ointment bases, but they are able to absorb water

5
New cards

w/o, o/w

Absorption bases form two subcategories: bases that can form — and — emulsions making them occlusive and emollient by forming a lipophilic barrier

6
New cards

water-removable

— — bases are o/w emulsions that form hydrophilic ointments, while technically creams , they are considered ointments due to their waxy/greasy texture

7
New cards

water

because the external phase of water-removable bases is —, they can easily wash off skin or clothing

8
New cards

water soluble

— — bases are hydrophilic bases that have a greasy or waxy texture and are considered “greaseless” ointment bases

9
New cards

stability, washable, absorption

when choosing an ointment base consider the drug — within the base, whether there is a need for the base to be occlusive, emollient, or —, additionally we must consider how the base impacts drug —

10
New cards

creams

— are either w/o or o/w semisolid emulsions, tend to have a less oily, waxy, or greasy feel than ointments and are typically

11
New cards

inorganic, strands, intersecting

two types of gels: first includes spherical — particles that aggregate in — forming a system across the gel

second includes particles with — fibers that form the network across the gel

12
New cards

lotions

— can be medicated or unmedicated and are distinguished by their higher viscosity than liquid topical formulations and use across large areas of the body, can also be suspensions

13
New cards

paste

— are suspensions which contain a high concentration of powder, giving it a high viscosity, which gives them a stiff and gritty feeling

14
New cards

consistent

transdermal drug delivery systems (TDDS) that contain specific doses of drug and deliver it at a — rate over a give time period

15
New cards

controlled, plasma, efficacy

advantages of TDDS include the drug to be delivered at a — rate and maintains consistent drug — levels over a long duration (24 hr to wk), can lead to increased — and decrease risk of toxicity, helps with patient compliance, bypasses first-pass metabolism

16
New cards

20, 500, contact dermatitis

disadvantages of TDDS the dosage form can only hold a max of #mg per day, the drug must also be <#Da, TDDS can cause skin irritation or — — usually due to the adhesive in the patch

17
New cards

37C

internal body temp

18
New cards

epidermis

— is the outermost layer of skin and contains stratified squamous cells that are keratinized, it has no blood vessels and is supplied with nutrients from the dermis layer, it has 4 to 5 layers

19
New cards

dermis

the — contains the papillary layer (made of connective tissue and capillaries) and the reticular layer (the largest part of this layer, provides nutrition to the dermis)

20
New cards

subcutaneous

the —/hypodermis layer contains both areolar and adipose connective tissue and helps to hold the skin to the tissues beneath it, has adipose allowing lipophilic drugs to have a longer duration of action

21
New cards

transappendageal

the — pathway moves along hair follicles or sweat ducts into the subcutaneous

22
New cards

microneedle

— pathway allows drugs to penetrate more deeply into the epidermis past the stratum corneous, but not into the dermis

23
New cards

barrier, temperature

properties that influence drug diffusion include properties of the drug itself, properties of the —/skin, —, and concentration difference between the high and low concentration areas

24
New cards

stratum corneum, 500, passive

The — — is the main barrier, and small (under # Da), lipophilic drugs cross it most easily. Chemical, physical, and poration methods can improve absorption when — diffusion isn’t enough

25
New cards

first pass metabolism, removed, irritate

Transdermal systems avoid — — —, keep drug levels steady, and stop working once the patch is —. They’re limited to low doses (about 10–20 mg/day) and small molecules, and they can — the skin

26
New cards

gel matrix

Matrix

TDDS contain drug particles within a — — that controls the release rate of the drug, has a backing and an adhesive

27
New cards

reservoir

— TDDS use a rate-controlling membrane, has a backing and an adhesive

28
New cards

drug in adhesive

— — — TDDS are a form of matrix TDDS where the drug is contained in the matrix/adhesive layer

29
New cards

altering, concentration, reversible

Chemical enhancers can either improve diffusion by either — the skin barrier of the stratum corneum or by increasing drug — in the stratum corneum to improve the concentration gradient difference between the stratum corneum and the deeper layers to speed the diffusion step; effects must be —

30
New cards

ethanol, methyl laureate

chemical enhancers that alter the skin barrier include: —, glyceryl monolaurate, — —

31
New cards

lipophilicity, hydrophilicity, supersaturation

chemical enhancers that improve drug concentration and aid in diffusion have 2 subcategories: they can either change the relative difference in — and —, or they can use — of the patch

32
New cards

polyvinylpyrrolidone

chemical enhancers that change the relative difference in lipophilicity and hydrophilicity include povidone and —

33
New cards

iontophoresis

— uses a low-voltage electrical current to move charged molecules across the skin barrier

34
New cards

cationic, anode

iontophoresis devices will have a — drug in the positively charged anode chamber while the salt solution is in the — chamber and vice versa

35
New cards

warmer

— temperatures improve TDDS drug diffusion

36
New cards

electroporation

— uses high-voltage electricity in short millisecond pulses to create transient pores in the skin that allow drugs with poor diffusion to permeate the skin barrier

37
New cards

microdermabrasion

— is a technique that removes layers of the stratum corneum improving drug permeation

38
New cards

synthetic glycerol

fatty suppository bases are typically — — derived fats

39
New cards

reactive

the more hydroxyl groups present the more — the fatty suppository base

40
New cards

hydrophilicity

surfactants can be added to the fatty suppository base to help increase the — of the base and emulsify the fatty acids

41
New cards

plasticizer, hardening

the presence of free hydroxyl groups can have a — effect and post—- on suppository bases

42
New cards

plastic, cracks

The plasticizer effect refers to the fact that the greater the number of free hydroxyl groups, the more — the base becomes after cooling, helps to prevent — during cooling

43
New cards

storage, free hydroxyl

Post-hardening is where a suppository of a specific hardness becomes even harder over time in — and this phenomenon increases with the number of — — groups, can increase the likelihood of reactions between the base and the drug

44
New cards

cocoa, witepsol, suppocire

common fatty suppository bases include: — butter, — series, — series

45
New cards

hydrophobic

water soluble bases are used for — drugs to allow the base to dissolve quickly so that the drug can be absorbed as readily as possible

46
New cards

glycero-gelatin

the most common water-soluble base is the — — base

47
New cards

defecate

glycero-gelatin suppositories swell after insertion in the rectum that can cause pressure and an urge to —

48
New cards

PEG

the other major water-soluble suppository base is — (higher numbers 6000 mean a higher molecular weight and vise versa 400)

49
New cards

drug density/base density

The displacement factor (— —- — —) shows how much base a dense drug displaces, so the amount of base can be adjusted to get the dose right.

50
New cards

emulsion, internal

aerosol foams are — with a propellant that is in the — phase

51
New cards

4.5-5.5

semisolids for vaginal use should be matched to vaginal pH #-#

52
New cards

fluid

a major draw back for rectal drug delivery is that there is minimal — for drug dissolution

53
New cards

liver

the superior rectal vein carries blood to the —

54
New cards

systemic

the middle and inferior rectal veins carry blood to — circulation, bypassing first pass metabolism

55
New cards

GI, oral, unpredictable

Rectal and vaginal versus oral delivery: Both routes avoid — barriers, and they’re useful when — dosing isn’t possible. Their downsides are dose loss (from defecation or leakage), — absorption and low patient acceptance.

56
New cards

unionized

in vaginal delivery drugs with a pKa above 5.5 will be predominantly — which will allow them to readily permeate the mucosa

57
New cards

uterine, hormonal

Vaginal absorption depends on pH (4.5–5.5), the first — pass effect and — changes

58
New cards

foams, rings

rectal and vaginal dosage forms include: suppositories, —, liquids/semisolids, vaginal tablets, films and —

59
New cards

force, solubility

Nanoscale solubility: At the nanometer scale, surface and interior molecules are held almost equally loosely, so less — is needed to pull molecules into solution. This raises true — , which doesn’t happen with larger particles

60
New cards

200

Pharmaceutical nanoparticles are usually # nm or smaller.

61
New cards

solid, micelles, liquid-core

pharmaceutical fall into 3 groups: — particles, surfactant or copolymer —, and — — vesicles held inside a lipid or polymer shell

62
New cards

nanoparticles

— are typically crystalline particles

63
New cards

large

top-down technique for creating nanocrystals: — particles are divided until the particles are nanosized

64
New cards

precipitated

bottom-up technique for creating nanoparticles: solution of drug is — under specific conditions so that the crystals are nanosized

65
New cards

iron oxide

— — are the only metallic nanoparticles used in internal pharmaceuticals

66
New cards

titanium dioxide

— — nanoparticles are the only metallic nanoparticles used externally in susnscreen

67
New cards

hydrophobic

— drugs go in micelle cores, lipid matrices, oily-core nanocapsules, or the liposome bilayer

68
New cards

hydrophilic

— drugs go in aqueous cores

69
New cards

micelles, temperature

— are typically composed of surfactants that tend to favor the surface of liquids and once they reach a high enough concentration they form a sphere called the CMC which is — dependent

70
New cards

solid lipid nanoparticles, nanostructured lipid carriers

what are the 2 types of lipid matrix nanoparticles: — — — (SLN), — — —(NLC)

71
New cards

solid, cytotoxicity

SLN are — at room temperature and have a surfactant layer on their surface. They are easily produced and show low —, form a crystalline center that can cause drug to prematurely release

72
New cards

crystal,

NLCs are composed of a mixture of lipids and do not have a rigid — structure, and can better load drug and prevent it from prematurely leaking

73
New cards

reticuloendothelial system

a major drawback of lipid matrix nanoparticles is that they are readily cleared by the — — (RES)

74
New cards

50, crosslinked

hydrophilic polymers are added to water to form a #% w/w hydrogel. The hydrogels can then be made into nanoparticles and polymers can be — covalently or ionically to improve strength.

75
New cards

macrophages

ES clearance: — in the RES see many nanoparticles as foreign and remove them before they reach their target. PEGylation and very small particle sizes (under 100 nm) help them last longer in circulation

76
New cards

adherence, stability, nonbiodegradable

Nanotechnology can improve bioavailability, targeting, —

(through sustained release), and combined diagnostic and treatment uses. Its challenges are particle —, toxic solvents, — materials, and depending mostly on IV delivery

77
New cards

injection, for injection, injectable emulsion, injectable suspension, for injectable suspension

what are the 5 major types of injections listed by the USP:

78
New cards

rapid, absorbed

advantages of parenteral drug delivery: injections give — or long-lasting drug delivery and work for unconscious or uncooperative patients and for poorly — drugs

79
New cards

sterility, pyrogens, stable

disadvantages of parenteral drug delivery: strict requirements for —, freedom from — and low irritation, and many drugs are hard to make into an injection because they don’t dissolve well or aren’t —.

80
New cards

IV

— injections are given directly into a vein. Medications can be given in a variety of volumes. This route gives 100%

bioavailability and the fastest onset of action.

81
New cards

IM, dense, blood flow

— injections are given into a muscle, such as the ventro gluteal or deltoid. These have a slower onset than IV injections, but still fairly rapid onset of action → more — muscle will result in slower absorption, and faster — — will speed up absorption

82
New cards

subcutaneous

— injections, also called hypodermic injections, are given under the skin, solutions diffuse in the veins and suspensions must dissolve first

83
New cards

intradermal

— injections are given into the skin

84
New cards

intrathecal

— injections are injections into the intrathecal space of the spinal cord

85
New cards

intra-spinal

injection given in the spinal column

86
New cards

intra-articular

injections into a joint, typically for sustained pain relief or for inflammation

87
New cards

intra-arterial

injection into an artery rather than a vein

88
New cards

intra-ocular

injections into the eye, typically to treat a serious eye condition

89
New cards

intra-cardiac

injections into the heart, typically in emergency situations

90
New cards

solutions, isotonic

injectable — are typically made up of the active ingredient and excipients dissolved in water for injection, they should be —

91
New cards

siliconization

— is where a thin layer of silicone is added to syringe parts or portions of the packaging in order to improve the smoothness of syringe action. Silicone oil is typically used. This helps to ensure that vials and syringes are completely emptied and the entire dose is dispensed

92
New cards

depot, oily, polymer microparticles

extended release injections form a — at the injection site (usually — solutions or suspensions, aqueous suspensions or — — such as PLGA) that slowly release drug over weeks to months

93
New cards

time, 10

D value is the — of sterilization needed to ensure that only #% of the viable microbes remain

94
New cards

moist heat

autoclaving is — — sterilization that kills microbes by denaturing their proteins

95
New cards

oxidation

dry heat sterilization kills microbes through — of their cell constituents, commonly used for glassware, syringes, surgical instruments, or other items that cannot handle moisture

96
New cards

reactive, DNA

ethylene oxide sterilization uses ethylene oxide which is — and used as an alkylating agent → can disrupt organism —

97
New cards

gamma, electrons

ionizing radiation sterilization: — rays ionize indirectly while — ionize directly and this can lead to physical changes within microorganisms such as DNA strand rupture or generation of free radicals that react with cells of the microorganisms

98
New cards

filter, freeze drying

Sterilization by filtration does not use heat, moisture, or radiation, but rather passes injectable solutions through a sterilizing — that removes microorganisms, used to sterilize liquids prior to — —

99
New cards

membrane filtration, direct transfer

sterility testing is done by — — or — —

100
New cards

limulus amebocyte lysate

a common test for endotoxins is the — — — (LAL) test