1/53
Looks like no tags are added yet.
Leaching
the process where water-soluble substances, such as minerals, nutrients, or pollutants, are dissolved and carried downward through the soil by percolating water
Humus
the dark, complex organic matter in soil resulting from the partial decomposition of plant and animal remains
What is soil?
Material which nourishes and supports growing plants
The ideal soil- Water
25%
The ideal soil- Air
25%
The ideal soil- Mineral Particles
45%
The ideal soil- Organic matter
5%
Benefits of soil-growth
Medium for plant growth
Benefits of soil-recycle
Recycling system for nutrients and organic waste
Benefits of soil-Habitat
Habitat for soil organisms
Benefits of soil-Engineering
Engineering medium
Benefits of soil-System
System for water supply and purification
Soil Horizon- O Horizon (organic)
Mainly organic litter and humus, darkest layer due to decomposition of leaf litter which produces humus
Soil Horizon- A Horizon (topsoil)
zone of matter accumulation, mainly mineral material and is darker than the lower layers because of humus, usually most productive layer, where root activity mostly occurs, may be referred to as surface layer
Soil Horizon- E Horizon
generally is bleached or whitish in appearance because of the lost of Fe, Al, and clay. occurs when water moves down this horizon and carries or absorbs these important nutrients’ for the soil down into farther horizons. The major losses are silicate clay, iron, aluminum, humus, or a combination of these leaving a concentration in salt and sand particles
Soil Horizon- B Horizon
Known as the zone of accumulation, commonly is the zone where leached material accumulates
Soil Horizon- C Horizon
Unconsolidated parent material and soft bedrock, may consist of less clay and weathered materials
Soil Horizon- R Horizon
hard, continuous bedrock
Soil forming factor-Cl
Major factor in determining the kind of plant and animal life in and on the soil. Also determines the amount of water available for weathering minerals and the mineral elements released. Climate influences soil temperature, so determines the rate of chemical weathering
Soil forming factor-O
Plants affect soil development by supplying the upper layers with organic matter, recycling nutrients from lower to upper layers to prevent erosion. Deep rooted plants are good because the water they supply to lower layers prevents leaching.
Soil forming factor-R
The slope of the surrounding landscape after erosion and drainage. Steeper slopes cause the water to run downhill quicker causing more erosion. Erosion causes soil at the bottom of the slope to be superior to soil at the bottom of the slope. Certain parts of the slope receive different amounts of sunlight which can lead to some soil on the slope to be very dried out.
Soil forming factor-P
Serves as the starting point for the formation of soil. Rock is broken down by weathering, which forms mineral materials serving as a basis of soil. Soil generally inherits color from it’s parent material
Soil forming factor-T
Soil takes many years to form. Over time, it begins to lose characteristics of the parent material. After long periods, it piles up, forming the distinct soil horizons.
Additions
Materials deposited onto the soil from above or from below, including organic matter from decomposing leaves. Most organic matter _____ to the surface increase the cation exchange capacity and nutrients, which also increases plant nutrient availability
ex: leaf litter decomposition, soil displacement from wind erosion
Losses
Processes where soil components are removed from the soil profile, leading to a decline in soil quality and productivity. Most ___ occur through leaching. Water moving through the soil dissolves certain minerals and transport them into deeper layers. Some materials, especially sodium salts, gypsum, calcium carbonate, are relatively soluble
ex: leaching of nitrogen and phosphorus, erosion
Translocations
The movement of soil materials within the soil profile from one location or horizon to another, driven by water, gravity and organisms in the soil. ___ means movement from one place to another. In low rainfall areas, leaching is often incomplete. Water starts to move down the soil horizon, dissolving soluble minerals as it goes. There is not enough water to move all the way through the soil. When the water stops moving it evaporates, leaving behind the salts.
Examples: movement of inorganic matter to organic matter (or this example in the definition)
Transformations
Process that change the physical, chemical, and biological composition of soil elements, breaking down and altering them into new forms. ____ are changes that take place in the soil.
Microorganisms that live in the soil feed on fresh organic matter and change it into humus, chemical weathering changes parent material
Available water capacity
an estimate of how much water a soil can hold and release for use of plants measured in inches of water per soil. Influenced by soil texture, content of rock fragments, organic matter, and compaction
Cation Exchange Capacity (CEC)
a measure of the ability of soil to hold and exchange cations. One of the most important chemical properties in soil and is usually closely related to soil fertility
Drainage class
refers to the frequency and durations of periods of saturation or partial saturation during soil formation. Seven classes of natural drainage are used in soil surveys
High water table
Seasonal ______ is the highest average depth of free water during the wettest season. The ground water level, or _____, may be high year round or just during heavy rains. How high the ____ rises and how long it stays there affect what can be done on that soil
Organic matter
Encourages granulation and good tilth, increases porosity, lowers bulk density, promotes water infiltration, reduces plasticity and cohesion and increases available water capacity. It has a high cation adsorption capacity and its decomposition releases nitrogen, phosphorus, and sulfur.
Permeability (Saturated Hydraulic Conductivity –water movement through saturated soils)
_______ is saturated hydraulic conductivity. Saturated hydraulic conductivity is influenced by texture, structure, bulk density, and large pores. Soil structure influences the rate of water movement through saturated soil, in part, by the size and shape of pores.
_____ is used in drainage design, irrigation scheduling, and many conservation practices.
Reaction (especially pH)
Soil ___ is an expression of the degree of acidity or alkalinity of a soil. It influences plant nutrient availability. A very acid soil (___ <5.0) typically has lower levels of nitrogen, phosphorus, calcium, and magnesium available for plants, and higher levels of availability for aluminum, iron, and boron than a neutral soil at ___ 7.0. At the other extreme, if the ___ is too high, availability of iron, manganese, copper, zinc, and especially phosphorus and boron may be low.
Salinity
Salts, mainly sodium, magnesium, calcium, and chloride or sulfate, may interfere with the absorption of water by plants. They also create a nutrient imbalance in some plants. Soils that have more than 2 mmhos/cm of electrical conductivity in soil solution are considered saline.
Slope
the gradient of the elevation change. A 10 foot rise in 100 feet is a slope of 10 percent. Ranges of ____ assigned to map units represent practical breaks on the landscape that are important for the use and management of the area. Terraces, irrigation, and tillage
Soil Management Interpretations- Soil productivity
the output or yield per acre of a specified crop or pasture under a defined set of management practices
Soil Management Interpretations- Irrigation
most favorable soils for ____ are deep, nearly level, and well drained. They have good surface soil permeability and a high available water capacity
Soil Management Interpretations- Drainage
is the removal of excess water from soil. Soils that have intermediate saturated hydraulic conductivity (permeability) respond well to subsurface ____ open ditches or a combination of these.
Soil Management Interpretations- Erosion control practices
the need for _____ depends on the potential for erosion and the cultivars grown. Some crops, such as hay and pasture, protect against soil erosion. For others, such as row crops, specific management practices are needed.
Soil Management Interpretations- Hydric soils
Wet soils defined as a group for the purpose of implementation of legislation for preserving wetlands and for assessing the potential habitat for wildlife. The soils considered to be ____ were selected on the basis of flooding, water table, and drainage class criteria. ___ soils developed under wet conditions (anaerobic within 12 inches) and can support the growth and regeneration of hydrophytic vegetation.
Soil Tests- Ball
Wet the soil, try to form a ball, if it forms and holds together it is either silt or clay, if not, pure sand. Next, throw it in the air, if it stays together, definitely not sand material.
Soil Tests- Ribbon
Push out the soil from middle of hand. If it ribbons even more than half of an inch, it is loam material (mixture of silt, clay and sands).
SC Major Land Resource Areas- Blue Ridge
130
SC Major Land Resource Areas- Piedmont
136
SC Major Land Resource Areas- Sand Hills
137
SC Major Land Resource Areas- Flatwoods
153A
SC Major Land Resource Areas- Tidewater
153B
SC Major Land Resource Areas- Coastal Plains
133A
•Use plant diversity to increase diversity in the soil
•Manage soils more by disturbing them less
•Keep plants growing throughout the year to feed the soil
•Keep the soil covered as much as possible
Four Basic Soil Health Principles
Sand
Size: 0.05mm-2mm, visible without microscope
Feel/texture: gritty, noncohesive (does not stick together unless very wet)
Color: white (if from quartz), red, yellow, or brown (from other minerals)
Water and nutrient holding capacity: Low ability
Water movement: High permeability
Soil mechanics: Large particles maintain volume and density, wind and water erosion, erodes on slopes
Agricultural use: Commercial farm crops
Non-agricultural use: Glass and ceramic production
Mostly quartz
Low chemical activity
Large pore space
Low water holding capacity, the finer the sands: higher water holding capacity
High conductivity
Silt
Size: 0.002mm-0.05mm, only visible with microscope
Feel/texture: smooth, like silly putty
Color: light brown, can be gray or red
Water and nutrient holding capacity: Holds water; fertile, high nutrient content
Water movement: Well drained
Soil mechanics: Compresses easily, can form surface seals when flooded, washes away easily
Agricultural use: Good for crops, drought tolerant
Non-agricultural use: Used in construction
Feels like flour
Medium pore spaces
Better water holding than sand
Clay
Size: <0.002mm, only visible with microscope
Feel/texture: sticky and plastic
Color: light gray to deep red
Water and nutrient holding capacity: High, stays wet and holds nutrients; often phosphate deficient and has high alkaline pH
Water movement: Slow, drought tolerant
Soil mechanics: Swells (when wet) and shrinks and hardens (when dry), resists erosion
Agricultural use: Good for crops that like moisture
Non-agricultural use: Human waste treatment
Chemically active (negatively charged) and bonds with positive cations in water)
Small pore space
Low conductivity
Iron and organic matter are the most important coloring agents
When iron is dissolved in water, it is stripping the water out of the color profile, when water drains, red and gray is pulled out of soil: indicative of water table
The “mottled” soil colors are results of fluctuating water table
Caused by bacteria driven oxidation-reduction chemical reactions (redox)
Sand is the easiest particle for leaching to occur
Soil Color