1/15
Comprehensive vocabulary flashcards covering structural components, design criteria, ceiling frame upgrades, and material estimation formulas for ceiling framing.
Ceiling Frame
The system of support for all components of a ceiling.
Ceiling Joists
The main ceiling framing members that span across rooms, typically spaced 16 in OC (on center).

Strong-back
An L-shaped wooden support attached to the tops of ceiling joists to strengthen them, maintain spacing, and bring them to the same level.
Materials Supported by Ceilings
The structural surfaces and mechanical items carried by ceiling framing, including drywall, paneling, ceiling fans, light fixtures, range vents, and HVAC ducts.
Ceiling Joist Design Criteria (Loads)
Strength requirements established to carry a 10lbs. per sq. ft. dead load plus a 20lbs. per sq. ft. live load.
Ceiling Joist Deflection Criterion
Deflection limit specified for joists under live load, calculated as the span length in inches divided by 240 (L/240).
Roof-Level Ceiling Assembly vs. Floor Framing
An assembly constructed just below the roof that resembles floor framing, except that lighter joists are used and exterior headers are omitted.
Perpendicular Ceiling Joists
An arrangement where ceiling joists run perpendicular to one another when a span is too great, requiring them to be supported by load-bearing walls.


Blocking and Bridging
Lateral bracing elements installed within floor framing to keep joists from flexing or twisting, contrasting with strongbacks used in ceiling framing.

Truss Bottom Plate (Chord)
The bottom member of a pre-made truss that takes the place of ceiling framing, making separate ceiling joist framing necessary only when rafters are used.
Cathedral Ceiling
A pointed or slanting ceiling of a room that rises through more than one floor.

Vaulted Ceiling
An architectural term for an arched form used to provide a space with a ceiling or roof.

Barrel Vaulted Ceiling
A vaulted ceiling characterized by a curved, barrel-shaped surface.

Ceiling Joist Estimation Formula
The calculation used to estimate the number of ceiling joists: divide the building length by 1.33ft and multiply by 2.
Strongback Material Estimation Formula
The calculation used to estimate strongbacks: divide the total length of the building by the length of the lumber piece used for the strongbacks.
Total Ceiling Material Estimation
The complete material order for ceiling framing, obtained by adding the estimated ceiling joist count to the estimated strongback material count.