1/39
Comprehensive practice flashcards covering tablet blend ingredients, mixing mechanisms, segregation causes, equipment operation, geometric dilution, and troubleshooting based on lecture ASE210.
In tablet manufacturing, what distinct purposes do pre-blending and final blending serve?
Pre-blending distributes ingredients, whereas final blending adds external-phase excipients.

According to the unit operations flowchart for tablet manufacture, where does lubrication take place in relation to final blending and tablet compression?
Lubrication occurs immediately after final blending and directly before tablet compression.
What is the primary function of an Active Pharmaceutical Ingredient (API) in a tablet blend?
It provides the therapeutic effect.
What role does a diluent perform in a tablet powder mix?
It adds bulk and improves handling.
What is the primary function of a binder in a tablet formulation?
It helps particles form granules or compact.
What is the main role of a disintegrant in a tablet?
It helps the tablet break up.
What role does a glidant play in powder mix preparation?
It improves powder flow.
What is the purpose of adding a lubricant to a tablet blend?
It reduces sticking and friction.
How does achieving a uniform blend support dose consistency?
A uniform API distribution supports good content uniformity.
How does blend quality contribute to process consistency during compression?
A stable blend feeds the tablet press more evenly.
How does excipient uniformity affect final product performance?
Uniform excipients support consistent strength, disintegration, and dissolution.
What can happen to finished tablets if poor mixing or segregation occurs?
It can produce tablets that look identical but contain different amounts of API.
What defines an "unmixed" powder blend?
Ingredients remain in separate regions.
What defines a "sufficiently uniform" powder blend?
Small samples taken from different locations give similar composition.
What are the three primary mechanisms of powder mixing?
Convection, shear, and diffusion.
What is the mechanism of convection mixing in powder preparation?
Large groups of particles move from one location to another, producing rapid macroscopic movement.
What is a major limitation of convective mixing?
It does not guarantee mixing inside a moving clump.
How does shear mixing work, and how is it generated?
Layers of powder slide over neighbouring layers, created by velocity differences inside the powder bed.
What risk arises if excessive shear is applied during powder mixing?
Too much shear can damage fragile granules.
What physical process describes diffusion mixing in a powder bed?
The powder bed expands or "dilates" during movement, allowing individual particles to move randomly into newly created void spaces.

Which three mechanisms of powder segregation are illustrated in this image?
Percolation (small particles falling through spaces between larger particles), trajectory (larger or denser particles traveling farther before stopping), and elutriation (very fine particles carried upward by air currents).
How does percolation segregation occur in a powder mixture?
Small particles fall through spaces between larger particles.
How does trajectory cause powders to segregate?
Larger or denser particles travel farther before stopping.
What causes elutriation segregation?
Very fine particles are carried upward by air currents.
How do spherical versus irregular particle shapes influence powder behavior during mixing?
Spherical particles flow well but can segregate, whereas irregular particles may interlock.
What critical check must be noted regarding weighing errors before mixing begins?
Weighing errors cannot be corrected by longer mixing.
What five steps should be carried out to prepare raw materials before switching on a mixer?

What mixing technique is shown in this sequence for blending low-dose active pharmaceutical ingredients?
Geometric dilution, in which the API is combined with approximately equal portions of diluent in successive stages.
Why is adding a low-dose API (e.g., 1% of a batch) directly to a full mixer not recommended?
Direct addition to the full mixer may give slow and unreliable distribution.
What is the recommended four-step charging order for tablet powder blending?
A. API + part of diluent; B. Remaining diluent + binder; C. Disintegrant / glidant; D. Lubricant last.

What two types of tumble blenders are shown installed in this cleanroom environment?
A V-blender (left) and a double-cone blender (right).
What is the primary mixing mechanism of tumble mixers, and what powder types are they best suited for?
Gentle diffusion-dominant mixing, best suited for free-flowing powders and granules.

What equipment is shown in this cutaway diagram, and how does it move powder?
A ribbon blender, which uses opposing helical ribbons to move material in opposite axial directions through convective mixing.
Which blender feature is preferred when blending cohesive powders or soft agglomerates?
More shear or an intensifier.
What mixer characteristic is selected when handling fragile granules?
Low shear to limit attrition.
How do incorrect fill levels (too full vs. too empty) compromise blender performance?
Too full results in little movement, while too empty causes poor contact or excess tumbling.
What adverse outcomes occur if blender rotation speed is set too slow or too fast?
Too slow results in weak movement; too fast causes centrifuging, attrition, or dusting.
What negative effects can excessive mixing of magnesium stearate (over-lubrication) cause?
Weaker tablets and slower disintegration or dissolution.
What sampling rules should be followed to confirm that a powder blend is uniform?
Sample from defined locations or times using a validated sampling tool and procedure, avoiding bias toward the surface or easy-to-reach areas.
If finished tablets dissolve too slowly, what are the likely causes and the appropriate corrective actions?
The likely causes are over-lubrication or dense granules; the corrective actions are shortening lubrication time and reviewing the granulation process.