1/155
Looks like no tags are added yet.
Tremendous amounts of pressure and temperature cause deformation,
deformation
Tremendous amounts of pressure and temperature cause deformation,
, a general term for all changes in shape or volume of rocks.
Continents grow larger as mountain belts evolve along their margins at convergent plate boundaries, this process is called
continental accretion
Accumulation of sediment and igneous activity add
new continental crust
Displaced Terranes are
geologic continuous areas within mountain belts where the age and characteristics of the bedrock appear unrelated to that of the adjacent regions
Displaced Terranes are geologic continuous areas within mountain belts where the ____________of the bedrock appear unrelated to that of the adjacent regions
age and characteristics
Displaced Terranes are geologic continuous areas within mountain belts where the age and characteristics of the bedrock appear unrelated to that of the adjacent regions
●Terrane boundaries are usually faults
Displaced Terranes are geologic continuous areas within mountain belts where the age and characteristics of the bedrock appear unrelated to that of the adjacent regions
●Terrane boundaries are usually
faults
Rock Deformation- How Does It Occur?
Stress and Strain in the Earth’s Lithosphere
force per unit area.
Stress
Rock Deformation- How Does It Occur?
Stress and Strain in the Earth’s Lithosphere
Stress – force per unit area.
Basic types of stress are
●tensional and shear.
Rock Deformation- How Does It Occur?
Stress and Strain in the Earth’s Lithosphere
a change in size or shape in response to stress.
Strain
Rock Deformation- How Does It Occur?
Stress and Strain in the Earth’s Lithosphere
Geologic structures are indicative of the type of stress, other factors contributing to the strain outcomes are:
●Amount and rate of stress application.
●Type of rock.
●Temperature and pressure.
Rock Deformation- How Does It Occur?
Stress and Strain in the Earth’s Lithosphere
Geologic structures are indicative of the type of _____, other factors contributing to the strain outcomes are:
stress
Stress and Strain
Types of Stress:
Compression-
Tension-
Shear-
Stress and Strain
Types of Stress:
Compression-
●when rocks are squeezed, the forces are directed toward one another. This will result in either folding or faulting depending whether the material is malleable or brittle.
Stress and Strain
Types of Stress:
Compression-
●when rocks are squeezed, the forces are directed toward one another. This will result in either folding or faulting depending whether the material is malleable or brittle.
malleable =
a fold
Stress and Strain
Types of Stress:
Compression-
●when rocks are squeezed, the forces are directed toward one another. This will result in either folding or faulting depending whether the material is malleable or brittle.
brittle=
fault
Stress and Strain
Types of Stress:
Tension-
●the rocks are being pulled apart, the forces are working against each other in opposite directions. Causes faulting
Stress and Strain
Types of Stress:
Shear-
forces are parallel to one another in opposite directions. This results in displacement.
Types of Strain
Elastic strain/deformation
deformed materials return to original shape after stress is removed.
Types of Strain
Elastic strain/deformation
Elastic limit
●– the point beyond which the rock will not return to its original shape and is permanently deformed.
Types of Strain
Plastic strain/deformation
subjected to stress beyond their elastic limit. the rock to deforms without macroscopic fracturing, result in folding
Types of Strain
Fracture
subjected to stress and the rocks break rather than bend or flow, result in faulting
Strike and Dip- The Orientation of Deformed Rock Layers
Strike
the compass direction of a line formed by the intersection of an inclined plane with a horizontal plane.
Strike and Dip- The Orientation of Deformed Rock Layers
Dip
the direction and angle (degrees) from horizontal in which a plane is oriented.
Strike and Dip- The Orientation of Deformed Rock Layers
When we observe tilted rock layers we first know, based on the geologic
principle of original horizontality,
Strike and Dip- The Orientation of Deformed Rock Layers
When we observe tilted rock layers we first know, based on the geologic principle of original horizontality,
that sedimentary layers are deposited in horizontal layers. We can then infer that they were lithified, and THEN tilted into their present position.
Strike and Dip- The Orientation of Deformed Rock Layers
Geologists use strike and dip to describe their orientation with respect to a
horizontal plane
Strike and Dip- The Orientation of Deformed Rock Layers
Geologic maps use special symbols to indicate
strike and dip of different geologic structures.
Strike and Dip- The Orientation of Deformed Rock Layers
Geologic maps use special symbols to indicate strike and dip of different geologic structures.
A long line oriented in the appropriate compass direction indicates
strike
Strike and Dip- The Orientation of Deformed Rock Layers
Geologic maps use special symbols to indicate strike and dip of different geologic structures.
A long line oriented in the appropriate compass direction indicates strike
●A short line perpendicular to the strike line shows the direction of
dip
Deformation and Geologic Structures
Remember that deformation and its synonym strain refer to changes in the
shape or volume of rocks.
Deformation and Geologic Structures
Any feature (fold, fault, fracture) resulting from deformation is called a
geologic structure.
Deformation and Geologic Structures
Geologic structures are present almost everywhere that rocks are exposed, and many are
detected far below the surface by drilling and geophysical techniques.
Deformation and Geologic Structures
Geologic structures are present almost everywhere that rocks are _______, and many are detected far below the surface by drilling and geophysical techniques.
exposed
Folds
wavelike bends in layered rock that represent rock strained in a ductile manner, usually under compression. Most folding occurs deep within the crust where pressure and temperature are high and rocks are more ductile than they are near the surface
Three basic types of Folds
Anticlines
Synclines
Monoclines
Folds
●– upward-arching folds.
Anticlines
Folds
●– downward-arching folds.
Synclines
Folds
●- simple bend or flexure in otherwise horizontal rock layers
Monoclines
Geometry of Folds
To complicate things further, folds are characterized by ________. All folds have a fold axis (refer to the previous slide).
nonplunging or plunging
Geometry of Folds
If the axis is horizontal, the fold is ____________
nonplunging
Geometry of Folds
plunge beneath adjacent rocks= plunging fold.
Geometry of Folds
A plunging anticline has all rock layers dipping
away from the center, exposing the oldest layers at the center.
Geometry of Folds
Vice versa for the plunging syncline, all beds dip
toward the center, exposing the youngest layers now at the center.
Geometry of Folds
Domes
●structures in which the beds dip away from a central point, as opposed to an anticline all beds dipping away from a a line (fold axis)
Geometry of Folds
Basins
●– structures in which the beds dip toward a central point, the circular counterpart of a syncline.
Geometry of Folds
equidimensional-
is, oval to circular- are domes and basins.
Geometry of Folds
Anticlines and synclines are _________, in contrast folds that are nearly equidimensional- that is, oval to circular- are domes and basins.
elongated structures
Geometry of Folds
Unfortunately, the terms domes and basins are also used to
distinguish highs and lows of Earth’s surface
Geometry of Folds
Domes and basins discussed here
do not necessarily correspond with mountains and valleys
Geometry of Folds
Most geologists are clear when referring to
surface elevations as opposed to geologic structures
Interpreting Folds
Inclined fold
When the axial plane is not vertical, the fold limbs dip at different angles
Interpreting Folds
Overturned fold
Both fold limbs dip in the same direction, but one limb is inverted ( rotated more than 90 degrees from its original position that it is not upside down
Interpreting Folds
Recumbent fold
the axial plane are horizontal
Overturned Fold Further Explained
Overturned fold
Both fold limbs dip in the same direction, but one limb is inverted (rotated more than 90 degrees from its original position that it is now upside down)
Joints
- fractures bedrock along which no movement has occurred, parallel to the fracture surface.
Joints
A joint may open up (widen), but the rocks on opposite sides of the fractures
do not move up, down, laterally along the fracture.
Joints
Joint Sets
multiple parallel joints.
Joints
Columnar jointing
caused by contraction of a cooling lava flow.
Joints
Sheet jointing
caused by expansion due to pressure release by removal of overburden.
Faults
fractures in bedrock along which movement has occurred.
Faults
On faults, blocks on opposite sides of the fracture move parallel with the fault surface, which is a
a fault plane
Faults
Three categories of faults, determined by movement of the blocks:
Dip-slip faults
Strike-slip faults
Oblique-slip faults
Faults
Three categories of faults, determined by movement of the blocks:
Dip-slip faults
movement is parallel (vertical) to the dip of the fault plane.
Faults
Three categories of faults, determined by movement of the blocks:
Strike-slip faults
●have movement that is predominantly horizontal and parallel to the strike of the fault plane.
Faults
Three categories of faults, determined by movement of the blocks:
Oblique-slip faults
●have movement with both vertical and horizontal components
Faults- hanging wall and footwall
To understand the difference between the two, remember:
The hanging wall hangs above my head, and I stand on the footwall
Faults- hanging wall and footwall
To determine the type of fault that has occurred you must pay attention to the blocks labeled
“hanging wall” and “footwall”. (for dip-slip faults)
Faults- hanging wall and footwall
For dip-slip faults,
vertical movement, we can then categorize them by their up or down movement.
Faults- hanging wall and footwall
Whether the hanging wall has moved down relative to the footwall=
normal fault
Faults- hanging wall and footwall
Whether the hanging wall has moved down relative to the footwall=normal fault
Or if the hanging wall has moved up relative to the footwall =
reverse fault.
Normal faults
dip-slip fault where the hanging-wall block has moved down relative to the footwall block due to tensional stress.
Normal Faults
When tensional stress is applied to the rock (the rocks are being pulled apart from one another),
there is more space for the rocks to spread out.
Normal Faults
When tensional stress is applied to the rock (the rocks are being
pulled apart from one another),
Normal Faults
When tensional stress is applied to the rock (the rocks are being pulled apart from one another), there is more space for the rocks to spread out.
This results in the hanging wall moving down and out relative to
the footwall.
Normal Faults
A specific feature in result of a normal fault is a
horst and graben,
Normal Faults
A specific feature in result of a normal fault is a horst and graben, _________ refers to
topography consisting of alternating raised and lowered fault blocks.
Normal Faults
Horst are the raised blocks, grabens
the lowered blocks.
Reverse Faults
dip-slip fault where the hanging-wall block has moved up relative to the footwall block due to compressional stress.
Reverse Faults
When compressional stress is applied,
the rocks are being squeezed and there is no place for the rocks to go except up and in.
Reverse Faults
The hanging wall get____________and hangs over the footwall
“thrown up”
Reverse Faults
A specific feature of a reverse fault is a thrust fault, Thrust faults
are reverse faults with dip angles less than 30° from horizontal
Strike-Slip Faults
have movement that is predominantly horizontal and parallel to the strike of the fault plane.
Strike-Slip Faults
A viewer looking across to the other side of a right-lateral strike-slip fault would
observe it to be offset to their right.
Strike-Slip Faults
A viewer looking across to the other side of a left-lateral strike-slip fault would
observe it to be offset to their left.
Strike-Slip Faults
No matter which side you place yourself on this road
the type of fault will be observed the same, try it out!
Strike-Slip Faults
Strike slip faults are due to a shear stress being applied, the direction of the shear stress will
result in the blocks being offset to the right or offset to the left
Deformation and the Origin of Mountains
Geologists use the term orogeny for an episode of mountain building during which
intense deformation takes place, generally accompanied by metamorphism, the emplacement of plutons and thickening of Earth’s crust.
Deformation and the Origin of Mountains
Another feature is sedimentary rocks now
deposited in shallow and deep marine environments.
Deformation and the Origin of Mountains
Fish and other marine fossils have been discovered on
mount Everest.
Deformation and the Origin of Mountains
The Everest orogeny first began by closing huge
oceans until the continents collided and compressed the rocks to form mountains.
Orogenies at Oceanic-Oceanic Plate Boundaries
Characterized by the subduction of oceanic crust beneath another oceanic crust, this forms a
volcano island arc
Orogenies at Oceanic-Oceanic Plate Boundaries
In the area between the island arc and its nearby continent forms a
back arc basin
Orogenies at Oceanic-Oceanic Plate Boundaries
In the area between the island arc and its nearby continent forms a back arc basin
The back arc spreads until it starts to close.
Orogenies at Oceanic-Oceanic Plate Boundaries
Eventually, the entire island arc complex is fused to the edge of the continent, and the
back arc basin sediments are thrust onto the continent, forming a thick stack of sheet thrust
Orogenies at Oceanic-Continental Plate Boundaries
When a thin and dense oceanic crust collides with a thicker and less dense continental crust, the oceanic crust get
subducted (pulled beneath) the continent.
Orogenies at Oceanic-Continental Plate Boundaries
This continuous slab pull results in the cold oceanic crust being
heated up as it reaches the mantle.
Orogenies at Oceanic-Continental Plate Boundaries
This continuous slab pull results in the cold oceanic crust being heated up as it reaches the mantle.
This new formed
magma being relatively close to the Earth’s surface will rise back up to create a volcanic chain on the continental side.
Orogenies at Continental-Continental Plate Boundaries
The Himalayans began forming when India collided with Asia about
40-50 million years ago.