Pipetting, Solutions, and Dilutions Flashcards

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/15

flashcard set

Earn XP

Description and Tags

Vocabulary flashcards covering key laboratory terminology for micropipetting, solution preparation, concentration calculations, and serial dilutions.

16 Terms

1
New cards

Accuracy

The degree to which measured numbers or experimental results are close to the reported or true target value.

2
New cards

Precision

The degree to which repeated measurements or numbers from the same experiment are close to each other.

3
New cards

Metric Conversion (Volume)

Converting liters to milliliters (ml\text{ml}) or milliliters to microliters (μl\mu\text{l}) by multiplying by 10001000 (shifting the decimal point 33 digits to the right), or dividing by 10001000 (shifting 33 digits to the left) to convert to larger units.

4
New cards

P20 Micropipette

A micropipette with a volume range of 0.5 μl0.5\,\mu\text{l} to 20 μl20\,\mu\text{l}, where the bottom digit on the volume display represents tenths (shown as a red digit).

5
New cards

P200 Micropipette

A micropipette with a volume range of 20 μl20\,\mu\text{l} to 200 μl200\,\mu\text{l}, where the three display digits represent hundreds, tens, and ones from top to bottom.

6
New cards

P1000 Micropipette

A micropipette with a volume range of 200 μl200\,\mu\text{l} to 1000 μl1000\,\mu\text{l}, where the top digit represents thousands (shown as a red digit).

7
New cards

Micropipette First Stop

The initial point of resistance on the plunger button, which is depressed before inserting the tip into liquid to aspirate/pick up the measured volume.

8
New cards

Micropipette Second Stop

The secondary, lower point of resistance on the plunger button, which is fully depressed during dispensing to expel all remaining liquid from the disposable tip.

9
New cards

Solution

A liquid mixture consisting of one or more solutes dissolved in a solvent.

10
New cards

Aqueous Solution

A solution in which water serves as the solvent.

11
New cards

Molarity (M\text{M})

A unit of chemical concentration defined by the formula M=Moles of SoluteLiters of Solution\text{M} = \frac{\text{Moles of Solute}}{\text{Liters of Solution}}.

12
New cards

Stock Solution Dilution Formula (CsVs=CdVdC_s V_s = C_d V_d)

The mathematical relationship used to calculate liquid-to-liquid dilutions, where CsC_s and VsV_s represent the concentration and volume of the stock solution, and CdC_d and VdV_d represent the concentration and volume of the diluted solution.

13
New cards

Aliquot

A measured sub-volume sample taken from an original sample or stock solution.

14
New cards

Diluent

The liquid material or solvent (such as water) in which a sample is diluted.

15
New cards

Dilution Factor (DF)

The ratio of the final total volume to the aliquot volume, expressed by the formula DF=Final VolumeAliquot Volume\text{DF} = \frac{\text{Final Volume}}{\text{Aliquot Volume}}.

16
New cards

Serial Dilution

A step-by-step series of dilutions where the dilution factor and total volume remain constant at each step, and each newly diluted solution acts as the stock solution for the next step.