1/36
Looks like no tags are added yet.
Following Watson and cricks proposal of DNAs function to be encoding hereditary information, what needs to be done to prove this?
The sequence of DNA needs to be determined en masse to determine how this sequence relates to hereditary information
This requires sequencing
Why was genome sequencing initially so hard? what was done to try and overcome this?
Sequencing of genomes Is hard becuase genomes are very large, even in lower complexity prokaryotes
Therefore, initial sequencing was based off of seqeuncing nucleic acids - such as RNA
Why was initial RNA sequencing possible to do?
This is because large amounts of pure RNAs can be isolated from different cell types
eg. tRNAs, rRNAs and others are very abundant in cells
eiother structural or key in protein production
What did Holley do in the sequencing revolution? How did Sanger advance this?
Purified large amounts of alanine tRNA from yeast
This was then digested with RNAses. chemical techniques could then be used to deduce the underlying DNA sequence
Sanger the took these initial seqeuncing technologies and developed them further. he applies 2d chromatography and gel electrophoresis to separate RNAs, allowing sequencing of larger RNAs
How did bacteriophage with DNA genomes aid the sequencing revolution?
As part of the bacteriophage lambda lifecycle, the phage produces a linear DNA fragment with a recession at the 3’OH of one stand.
This recession can be extended from, so by adding a purified polymerase and nucleotides, we can extend the end of this
DIfferent combinations of radio labelled nucleic acids can be added, DNA is synthesised and the fragments can then. be analysed to deduce sequence
this was done by wu and kaiser
Why are bacteriophage useful in studying genomes>
many progeny are formed per infection
each has small genomes
high progeny numbers allows for isolation of very pure phage
How did further work by wu enable synthesis of DNA?
synthesised short oligonucleotides complementary to a desired sequence of DNA
These could be designed against different sequences of DNA → DNA is then denatured → oligo hybridises, producing a 3’OH for extension from
This was the first example of seqeuncing by synthesis
What is a first generation sequencing technique?
Sanger sequencing
How does Sanger seqeuncing work
Sanger realised that by in vitro synthesising a base that lacked the 3’OH, you could terminate DNA sequence extension
to do this, he used ray was primers and carried out the same synthesis type reaction with polymerases
experimental setup:
4 different reaction tubes. all had all 4 deoxybases, DNA and polymerase. each had a different ddNTP added (in a small concentration)
carried out elongation in each
incorporation of a ddNTP lead to termination
this produces a group of fragments corresponding to the size where the ddNTP was incorporated
can run on a gel and detect
each band corresponds to the position where the ddNTP has been incorporated, allowing you to determine the seqeunce
this lead to the sequencing of the first gene - the phix174 genome
cons of sanger sequencing
laborious - gels are difficult ro work with, and require manual basecalling
low throughput - limited to short reads of about 200-300bps
these both mean that these techniques cannot be applied at scale
What has automation of Sanger sequencing involved?
removal of radio labelling, instead sed fluorescent dye labelled terinators
4 different colours of terminators enables all reactions to be done in one tube
cycle sequencing has enabled multiple rounds of elongation to be done to use less DNA
no longer use gel based detection - instead use a capillary electrophoresis based systen
reactions run through a capillary
a laser is fired through this to the detector - this detects the colour at the termination point, enabling sequence reading as they move through the tube
a computer detect these and creates a chromatograph - this allows for automated base calling
his increases potential read length - 1-1.5kbs per reaction
what is the general strategy for genome seqeuncing now?
Frament genome into larger regions (100s of kb)
Clone fragments into vectors (eg. YAC, BACs) for transformation into bacteria
Amplify, and individual clones are further fragmented and seqeunced
This produces sequences with overlapping regions of DNA, allowing for linking together - can then recreate the initial insert and piece together the entire genome
Why is the HGP approach to genome sequencing not feasuble>
too expensive!! - applying these technologies is not able to produce a rapid genome seqeunce
need to advance technology to enable affordable sequencing
What was the main advancement provided by the 454 seqeuncing?
allowed parallelisation becuase large libraries of fragments are made, and many of these can be sequenced at the same time
process of 454 pyrosequencing?
Take DNA and fragment into smaller seqeunces
Ligate known DNA seqeunces onto the ends, these are ligate adapters
Can then create a library
In this, took the fragments of DNA with ligate adaptors and fixed onto a bead → this was because they had corresponding oligonucleotides to the ligator fragment on the bead
Carried out emulsion PCR - each bead is put into a small water droplet with PCR reaction components
1000s of beads
each bead amplifies the DNA fragment ligated into it
Each bead amplifies the DNA fragment initially placed on it
Then drop the bads into a honeycomb like plate - lots of small wells
Can then carry out seqeuncing by synthesis approach
Know the end, so add a complementrary oligonucleotide and begin to elongate with polymerase
Detection used chemistry
as you carry out the synthesis reaiton, pyrophosphate is released
pyrophosphate release can be quantified to determine which base is added
flow individual bases over → enable elongiton → PPi production
adenosine 5’ phosphosulfate anf ATPsulfolyrase → this regenerates ATP from the PPi
ATP is then transferred to luciferase (converts luciferin to oxyluciferin) → resulted in light production
light produced was recorded across all wells, and deduced from the intensity of the light produced which base was incorporated
Many more reads!!
cons of 454 pyroseqeuncing
limited read length - 200-500bps
struggles with runs of the same bases
still very expensive
after the 454 seqeuncing was produced, what properties were determined for seqeuncing to be accessible?
To be acessble, seqeuncing needed to be cheaper and massiely parallelised
How did illumina sequencing contribute to the sequencing revolution?
in the 454 sequencing, main step needed to overcome was the bead emulsion step
illuminati's overcomes this
How are illuminati's sequencing libraries generated?
fragment DNA
ligate on adaptor molecules - DNAs of a known seqeunce
denature the DNA-adaptor complex so that they become single stranded
how did illumina seqeuncing enable massive parallelisation?
Used a flow cell to massively parallelise
Flow cell = glass slide with lots of surface anchored oligonucleotides
describe how illumina seqeuncing works?
Oligonucletodies complementary to adaptors ligated to DNA are present
Flow DNA library over the slide, and library fragments hybridise to immobilised oligonucleotides on the flow cell
Can then elongate the region of DNA - creating a dsDNA corresponding to the original fragment on a defined place on the slide
The first strand that you polymerise off of is covalently linked to the slide
The hybridised region from the library is denatured and removed, leaving a copy of the DNA that is covalently linked to the slide
Can then carry out bridge amplification
other oligos are isolated on the slide, and these correspond to the other end of the ligated adaptor
this means that the covalently attached seqeunce can bend over and hybridise to the other oligos
this provides another 3’ hydroxyl → can therefore extend and amplify
creates a bridge - each time you denature you can repeat, creating a single cluster corresponding to one piece of DNA you added to the slide
can do this and create millions of clusters - these clusters each correspond to an individual DNA seqeunce
we can then add an oligo and synthesise DNA with a polymerase by adding in individual nucleotides with a fluorescent dye present that blocks further extension
this means that only one nt is incorporated at a time
we can then image and detect the ntp incorporated, and then remove the block to enable further extension
how has genome seqeuncing implicated medicine?
genetic diagnosis and personalised medicine become viable and economic with advancements in genome sequencing
reading the genome and understanidng how it can apply to healthcare and disease diagnosis
as seqeuncing gets cheaper, this could become part of the diagnostic pipeline
disadvantage of illumina? why are these problems present?
Illumia is a short read seqeuncer - only up to 300-500 bases
this can cause problems when attempting to seqeunce genomes de novo
Thius can cause problems due to retroelements present
unique short reads will overlap due to unique regions of the genome
when sequencing repetitive bits, cannot piece back together due to lack of overlap
need to bridge the regions!!
alternative approaches to overcome the limitations faced by illumina?
pacific biosiences
Oxford nanopore
how does PacBio enable long read seqeuncing
PacBio sequencer uses single molecule, real time seqeuncing (SMART)
sequences individual molecules
Still relies on library production, but the library is different
Use ligated dumbell ends
this produces a single stranded, linear bit of circular DNA
can then take the dumbell library and add to a well
in each well, there is a polymerase, which recognises the dumbel end
then do sequencing by synthesis again
add in nts in well → image → base incorporation is detected
keep repeating this!
can do very long reads - up to 15kb in length
advantages of pac bios long read sequencing?
Very accurate → when repeating this, you keep sequencing and resequencing the same bit of DNA
this increases the efficiency of detection of accurate bases
accuracy is way over 99%
not amplifying, but instead just seqencing → can detect modification
can also use to make cDNA (to test RNA ) → produce large RNAs → detection of slice variantsVery accurate → when repeating this, you keep sequencing and resequencing the same bit of DNA
this increases the efficiency of detection of accurate bases
accuracy is way over 99%
not amplifying, but instead just seqencing → can detect modification
can also use to make cDNA (to test RNA ) → produce large RNAs → detection of slice variants
disadvantages of pac bios long read sequencing?
some gaps may still be too long for this sequencing technology
What limits the fragment length in ONT?
No limit on the length of DNA - only limit is the ragmentation you carry out
describe the process of ONT seqeuncing?
attach different adaptors - has a motor protein and a tether
these are then applied to a solid support, which contains a nanopore within it
acceptor for the tether is also present
ions normally go through the pore, producing a certain conductivity through the membrane
DNA is brought to the pore via the tether acceptor
this places the motor over the nanopore, and feeds the DNA through
DNA moving through disrupts the flow of ions - this produces a change in current
the change in current is related to the DNA sequence
the change in current is read, and computational methods are used to deduce the DNA
pros of ONT seqeuncing?
Allows for reads of 300+ bases of DNA at a time
creates libraries from your DNA - allows reading of modifications
can also do with RNA
→ epigenome type features!!
problems with ONT?
high error rate, still a slight problem
Lower throughput - only 5000-10000 nanopores on each of the flow cells used by the machine
What can we overcome using NGS?
With NGS, can bypass the laborious effort going into phuscially ordering the genome
Can now sequence the genome in one shot using:
ultra-long read, low fidelity
long read, high fidelity
lots of shorter sequences
Can go straight to fargmentation -> sequencing → computational stitching together
what is SBX?
New seqeuncing tehcnoliogy has been put forward - SBX
solves some probems, speeds up technology
expansion technology
describe the process of SBX
Creates nucleotide analogues - base is linked by a large polymer to the phosphate grouo
also has a translocation control element
have created a polymerase that can incorporate these into DNA
When we amplify the DNA library, we create a DNA with the polymer present
the bond to the polymer is acid cleavable, stretching out the nucleotides, and they have a translocation control element between them
can couple this to the nanopore
nanopores have a higher error rate as the speed of translocation through them is too high
by expanding DNAs so that pausing occurs, we get much more sompler traces, with a lower error rate
can get many more reads per hour
also increased pore numbers
how can sequencers be used to count?
In the context of functional biological experiments → can use as a counting machine
can count many events looking at the underlying DNA seqeunce
Can isolate RNA → make cDNA → make library and sequence → align back to RNA coding regions of genes
can count the number of sequencing reads to provide an idea of RNA epxression in the tissue
→ relies on the ability to count many pieces of RNA as we quantify a biological molecule
examples of the use of sequencers for counting? (DNA context)
ChIP-seq, MNase-seq, ATAC-seq, DNAse-seq. BS-seq, Ho-C
examples of the use of sequencers for counting? (RNA context)
RNA-seq TT-seq, 4sU-seq, SLAM-seq, Net-seq, Pro-seq