1/70
Looks like no tags are added yet.
What are the international system of units ?
7 basic units:
length, mass, time, electric current, thermodynamic temperature, amount of substance, and luminous intensity
2 related systems based on measurement of distance, mass, & time:
MKS - meter, kilogram, seconds (more preferred system)
CGS - centimeter, grams, seconds (old system)
Recommended video: chapter 1 slide 4
Mass
Amount of matter in an object (gram or kilogram measurement)
Force
Any influence that causes an object to undergo a change in speed, direction, or shape (newton measurement)
Weight
Force of gravity on an object (newton measurement)
Volume
Quantity of 3-dimensional space occupied by a liquid, solid, or gas (liter measurement)
Density
mass per unit of volume (g/cm3, km/m3, g/mL measurement)
Speed
distance traveled in a given unit of time (meters per second measurement)
Velocity
Distance traveled in a given unit of time in a specific direction (meters per second measurement)
Momentum
Mass times velocity of an object during motion (kg times meters per second measurement)
Acceleration
change in velocity as a function of time
(a=F/m or F=ma measurement) aka (acceleration = force/mass or Force = mass * acceleration
Inertia
resistance of any physical object to a change in its state of motion or rest (g or kg measurement)
Elasticity
the property of material that returns it to its original shape after it has been deformed by an external force (called stress, measured in newtons)
Stiffness (K)
The resistance of an elastic body to deformation by an applied force
K = force/meters
Work
occurs when a force exerted over a distance. The measure of work is called joules in the MKS system or ergs in the CGS system. One joule = a force of 1 newton through a distance of 1 meter. One erg = a force of 1 dyne through a distance of 1 cm.
measured in newtons times distance in meters
Energy
the ability to do work. Forms of this include chemical, electrical, thermal (heat), radiant (light), mechanical (movement), sound, and nuclear. Is categorized as either potential or kinetic.
Because this is based on work, it is also measured in joules. To do 100 joules of work, 100 joules of this must be expended
Power
rate of work done or energy used in a period of time and is measured in watts. This power is a measure of how quickly work can be done. Equivalently, this = work/time.
one watt = 1 joule/second
100 joules of energy used in 1 second, yield a power of 100 watts
Intensity
power of unit of area
measured in watts per square meter in MKS system or watts per square centimeter in the CGS system
Pressure
force acting perpendicularly on a specific surface area
the unit of measure in the MKS system is the pascal (Pa) which = a force of 1 newton over 1 square meter.
In the CGS system, the unit of measurement for pressure is dynes per square meter, also called a microbar
measures in cm H2O: the amount of pressure used to displace a column of water
1 kilopascal = 10 cm H2O
Measured in pounds per square inch (psi)
Behavior of Air
Air = 78% nitrogen + 21% oxygen
Brownian motion (random movement of these molecules)
these kinds of molecules, due to their thermal energy, constantly move around in random patters and at extremely high speeds
Air pressure
Atmospheric pressure (Patmos) at sea level is used as a basic comparison for other pressures of different locations or types
Patmos = 100kPa
Ppos > Patmos positive pressure
Pneg < Patmos negative pressure
Palveolar represents pressure within lungs
Ptrach represents pressure within trachea
Poral represents pressure within the oral cavity
Driving pressure
pressure differential or pressure gradient
to achieve equalization, air always moves from one area oh high pressure to an area of low pressure
Flow
the movement of air through a particular area in a certain interval of time
measured in liters per second (l/s), liters per minute (l/min), milliliters per seconds (ml/s), & milliliters per minute (ml/min)
Volume velocity
the rate of flow, the speed of a volume of air traveling in a certain direction
Laminar Flow
air that flows smoothly, with molecules moving in a parallel manner and at the same speed
vowels - produced with a relatively laminar flow of air
Turbulent flow
when an obstacle in its way disturbs the flow, the flow becomes less regular in its movement, resulting in little swirls, or eddies, of currents
fricatives - produced with a move turbulent flow
Relationship between air pressure, air volume, and air density
Air volume and air pressure, inversely related. As volume goes up, pressure goes down, and when the volume goes down the pressure goes up
Air pressure and air density are directly related
when air density goes up, so does the pressure, and when the air density goes down, so does the pressure
Ambient pressure (Pam)
A relatively steady air pressure due to Brownian motion
Sound occurs when Pam is disturbed in a way that results in the pressure alternating from high to low
Compression
Air molecules approach and collide, resulting in an area of high positive pressure (Density up, pressure up)
Rarefaction
When air molecules return and overshoot, resulting in an area of low negative pressure (density down, pressure down)
Why molecules keep vibrating: elasticity
A restoring force
Hooke’s law: the restoring force is proportional to the distance of displacement and acts in the opposite direction
Why molecules keep vibrating: inertia
the resistance of any physical object to a change in its state of motion or rest
Why molecules keep vibrating: friction
a force that opposes motion, decreasing the amplitude of air molecules (aka damping)
Frequency
the number of cycles that occurs in 1 second.
Unit of measurement if Hz
Period
The time it takes for one cycle to occur
The unit of measurement is seconds
Wavelength
the distance covered by one complete cycle
the unit of measurement is meters
Amplitude
the maximum displacement from position of rest
Waveform
a graph with time on the horizontal axis and amplitude on the vertical axis
Pure tones
has a single frequency
Complex sounds
occur when waves of different frequencies combine with each other
Periodic versus aperiodic complex waves: periodic
Periodic complex sounds consist of a series of frequencies that are systematically related to each other
the lowest frequency is the fundamental frequency (F0)
frequencies above the F0 are called harmonic frequencies (or harmonics)
the harmonics are whole number multipoles of F0
human voice, musical instruments produce sounds that are periodic and complex
Periodic versus aperiodic complex waves: aperiodic
Aperiodic complex sounds also consist of 2 or more frequencies, but they are not systemically related to each other
sounds like noise
continuous: sound of steam
transient: sound of applause
visually depicting sound waves: spectra
Line spectrum can demonstrate harmonics
horizontal axis frequencies
vertical axis acoustic energy
time is not evident on a spectrum
sound absorption
the dampening of a wave, with diminishing changes in air pressure
sound reflection
some portion of the sound that is not transmitted or absorbed bounces back from the surface of the boundary, and travels in the opposite direction of the incident wave
sound refraction
occurs when a wave changes direction because of a local difference of temperature in the air
sound diffraction
refers to a change in direction as a wave passes through an opening or travels around an obstacle
constructive interference
when an area of compression and rarefaction of the 2 waves combine at exactly the same time and the same moment in space, the amplitude of the resulting wave will be doubled
destructive interference
if an area of compression of one the waves combines at exactly the same time with an area of rarefaction of the other wave, the amplitude of the resulting wave will be decreased
Phase
During interference, the amplitude of the sound will be changed in complex ways. This relative timing of areas of high and low pressure in waves
Reverberation
A sound lasts slightly longer because of the interference, depending on the distance between the reflective surface and the ear
when the distance is substantial, a separate sound is heard, an echo
Frequency
rate of vibration of an object, measured in Hz
an objective measurement of physical phenomenon
Pitch
the perceptual counterpart of frequency
Octave
a series of 8 tones in music (C, D, E, F, G, A, B, C)
frequency: human range of hearing
Around 20 -20,000 Hz
below this range is called subsonic
above this range is called supersonic
Best frequencies for humans to hear: 1 kHz - 4 kHz
Amplitude
The range of human hearing is 20 micropascals (or 0.00002 Pa) to 20 pascals
Mathematically, intensity is proportional to the square of amplitude
intensity increased 5 times, amplitude increased 52 (5 squared)
Loudness
Greater loudness is perceived with greater amplitude and intensity
perception on the dB scale
ask first
acoustic resonance
occurs when air-filled container or cavity is forced to vibrate by an applied frequency or frequencies
e.g. many musical instruments are acoustic resonators such as acoustic guitar
acoustic resonators as filters
the resonator acts as a filter by
amplifying frequencies close to its own resonant frequency (RF)
attenuating frequencies farther away from its own RF
bandwidth
refers to the range of frequencies that a resonator will respond to
the shape and other physical characteristics of the container determine the bandwidth of the resonator
sharply tuned (or narrowly tuned) v. broadly tuned
cutoff frequencies
the point where the intensity transmission is reduced by one-half a which point the resonant system is considered to be unresponsive
a reduction in intensity on one-half = 3 dB (or 70.7% of amplitude)
therefore, the frequency at which the intensity is 3 dB less than the peak intensity of RF is the cutoff frequency (3 dB down point, or half-power point)
resonance curves
a graph to describe the way in which a resonator vibrates in response to any applied frequency
this curve is also called the transfer function of a resonant system
Input: the sounds that are used to force the resonator into response
output: the way in which the resonator responds to these sounds
Center frequency
RF
Lower cutoff frequency
Frequency below center frequency where the intensity is decreased by 3 dB
Upper cutoff frequency
Frequency above center frequency where the intensity is decreased by 3 dB
Passband
Frequencies between lower and upper frequencies
attenuation rate
the rate at which the resonator’s amplitude of response is attenuated
Low pass filter
responds to acoustic energy below a specific upper cutoff frequency
High pass filter
responds to acoustic energy above a specific lower cutoff frequency
Band pass filter
responds to acoustic energy between lower cutoff frequency & upper cutoff frequency
band stop filter
attenuates frequencies within a particular range