Robotics Electrical pt1

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/11

encourage image

There's no tags or description

Looks like no tags are added yet.

12 Terms

1
New cards

12 Volt Lead Acid Battery

Main power source of the robot, rated at 12 volts and 100 amp-hours, which supplies energy to the E-Board through the Power Distribution Hub.

2
New cards

120 Ampere Circuit Breaker

First line of defense between the battery and the E-Board that guards against abnormal current fluctuations and shorts, and also serves as the robot's on/off switch.

3
New cards

Power Distribution Hub (PDH)

The robot's power center that takes power from the battery and distributes it to the motor controllers, the Voltage Regulator Module, and the roboRIO, each through its own breaker, while terminating the CAN bus.

4
New cards

roboRIO 2.0

The robot's central controller that takes in sensor and camera information, executes commands, and starts the CAN chain that connects the motor controllers.

5
New cards

Voltage Regulator Module (VRM)

Steps voltage up or down as it passes through, supplying the network switch and the radio with the voltage they need.

6
New cards

Pneumatics Control Module (PCM)

Controls the compressor, pressure switch, and solenoids, is powered directly by the PDH, and communicates over CAN; its VSOL jumper sets 12V or 24V solenoid operation, but not both at once.

7
New cards

VH-109 Radio

Wireless radio that delivers camera information to the driver during competition, operates on 2.4 GHz and 6E Wi-Fi, and is powered with 12 volts from the PDH or VRM while connected to the roboRIO by ethernet.

8
New cards

Network Switch

A device that provides access to additional ethernet ports on the robot, expanding the network connections available to the robot's electronics.

9
New cards

Jetson Orin Nano

NVIDIA onboard computer that handles high-demand tasks, such as processing large amounts of data from cameras and sensors.

10
New cards

NavX2

Motion processor that combines data from gyroscopes and accelerometers so the robot can follow a defined path or rotate to a specific angle.

11
New cards

Robot Signal Light (RSL)

Indicator light with three states: solid means ON and DISABLED, blinking means ON and ENABLED, and no light means OFF.

12
New cards

LED Strips

Two strips mounted on opposite sides of the robot that show drivers and human players visual cues, such as elevator height or readiness to intake or score.