1/28
Looks like no tags are added yet.
List 4 functions of hydraulic oil
transmit power
lubricate
seal
cool
Define viscosity
A measure of a liquid’s internal resistance to flow
High viscosity vs low viscosity
High viscosity - thick and less fluid
Low viscosity - less thick, more fluid and runny
What are the results of using a hydraulic oil with a viscosity that is too high?
Increased friction created by the resistance to flow causes:
increased power required to drive the system
increased temperatures due to higher friction
greater pressure drops throughout the system
possible sluggish operation
greater retention of entrained air
What are the results of using a hydraulic oil with a viscosity that is too low?
The resistance to flow will be reduced so much that it causes
internal leakage, causing oil temperature to rise
actuator output speeds decreased due to internal leakage
excessive wear because of reduced oil film strength
List the 3 ways oil viscosity is measured.
absolute viscosity (force per unit area required to move two parallel surfaces)
kinematic viscosity (amount of time for a volume of oil to flow through a capillary tube)
relative viscosity (amount of time required for a give quantity of oil to flow through a standard orifice)
What are the 2 most common oil-grading systems?
International Standards Organization (ISO)
Society of Automotive Engineers (SAE)
Define viscosity index
The amount of viscosity change an oil will experience as the temperature changes
Oils whose viscosity changes very little over a wide temperature range are said to have a __________ viscosity index.
High
What is the minimum VI of hydraulic oil needed to perform satisfactorily?
90
Define pour point
The lowest temperature at which oil will flow
What is boundary lubrication?
Oil film between moving parts is squeezed to the point where minute surface imperfections (asperities) will contact one another
Define oxidation
The reaction of hydraulic oil with oxygen in the air
What 3 things does the rate of hydraulic oil oxidation depend on?
chemical makeup of the oil
temperature of the oil
amount of air the oil is exposed to
At what temperature does hydraulic oil begin to oxidize?
60 degrees Celsius and the rate of oxidation doubles with every 10 degree increase past 60.
The most important consideration when selecting a hydraulic oil is?
To consult the machinery manufacturer’s service manual to determine hydraulic oil requirements
List the 3 functions of a hydraulic oil reservoir.
hold the system oil supply
cool the oil
allow air and contamination to separate from the oil
What is the ideal reservoir size?
2.3x the flow rate of the pump
Why does equipment rarely have a reservoir of the ideal size?
Space limitations
A hydraulic reservoir must be large enough to be able to…
hold all of the oil that will drain back into the reservoir by gravity flow
keep the pump inlet line submerged
What are the two processes called that condition the hydraulic oil before it re-enters the system?
De-aeration and sedimentation
What are the 2 types of hydraulic reservoirs? What is the difference?
vented/atmospheric reservoirs (allow atmospheric pressure to act on the surface of the oil)
pressurized/closed reservoirs (pressurized to prevent cavitation damage to the pump)
Why are pressurized hydraulic reservoirs used?