1/40
Comprehensive practice flashcards in Question and Answer style for senior chemistry students, covering chemical equilibrium, acids and bases, titrations, redox processes, organic pathways, polymer structures, analytical spectroscopy, and industrial chemical synthesis according to the QCE syllabus.
What is the difference between an open system and a closed system in chemical equilibrium?
A closed system is one in which all the chemicals involved in a reaction are contained in a fixed space so that only energy can be exchanged with the surroundings, allowing equilibrium to be established. An open system allows both matter and energy to be added or lost to the surroundings, meaning a true chemical equilibrium can never be reached.
How is dynamic equilibrium defined in terms of reaction rates and macroscopic properties?
Dynamic equilibrium is a state reached in a closed system containing a reversible reaction where the rates of the forward and reverse reactions are equal. At this point, the reactions continue at the molecular level, but the concentrations of reactants and products, as well as observable macroscopic properties (such as colour, pressure, and mass), remain constant.
How does collision theory explain whether a chemical reaction is reversible or non-reversible?
A reaction is reversible if the activation energies (Ea) of both the forward and reverse reactions are low enough that a sufficient proportion of colliding particles possess the minimum kinetic energy required for a successful collision. If the reverse activation energy is extremely high, as in the combustion of hydrocarbons, the reaction is non-reversible.
What does Le Châtelier’s principle state regarding disturbances to an equilibrium system?
Le Châtelier’s principle states that if a change in conditions (such as temperature, concentration, volume, or pressure) is imposed on a system at dynamic equilibrium, the system will adjust to partially counteract the disturbance and establish a new position of equilibrium.
How does an increase in temperature affect the equilibrium position and rates of forward and reverse reactions?
Increasing the temperature increases the kinetic energy of particles and speeds up both the forward and reverse reactions. However, it increases the rate of the endothermic reaction more than the exothermic reaction because a greater proportion of particles overcome the higher activation energy barrier. As a result, the equilibrium shifts in the endothermic direction to absorb the added heat.
How is the equilibrium constant (Kc) expression written for the general reaction aA+bB⇌cC+dD, and how are pure solids and liquids treated?
The equilibrium expression is written as Kc=[A]a[B]b[C]c[D]d. In heterogeneous equilibria, pure solids and pure liquids have fixed concentrations and are excluded from the expression, meaning only gaseous and aqueous species are included.
How is the reaction quotient (Q) used to determine whether a reversible system is at equilibrium or which reaction is favoured?
The reaction quotient (Q) is calculated using non-equilibrium concentrations in the equilibrium expression. If Q=Kc, the system is at equilibrium. If Q<Kc, there are more reactants than at equilibrium, favouring the forward reaction (shift to the right). If Q>Kc, there are more products than at equilibrium, favouring the reverse reaction (shift to the left).
What is the solubility product (Ksp), and what is its expression for the dissolution aA(s)⇌cC(aq)+dD(aq)?
The solubility product (Ksp) is an equilibrium constant that provides a quantitative measure of the solubility of a sparingly soluble ionic compound in a saturated solution at a given temperature. Because the reactant is a pure solid, its expression is Ksp=[C]c[D]d.
How does the Brønsted–Lowry model define an acid and a base?
A Brønsted–Lowry acid is a substance that donates a proton (H+) to another substance, whereas a Brønsted–Lowry base is a substance that accepts a proton (H+) from another substance.
What is a conjugate acid–base pair, and what is the relationship between their relative strengths?
A conjugate acid–base pair consists of two species that differ from each other by the transfer of a single proton (H+). The conjugate base is formed when an acid donates a proton, and the conjugate acid is formed when a base accepts a proton. The stronger an acid or base is, the weaker its corresponding conjugate partner.
What is meant by an amphiprotic substance, and what equations demonstrate this behaviour in the hydrogen carbonate ion (HCO3−)?
An amphiprotic substance can either donate or accept a proton depending on the reacting conditions. For HCO3−, acting as an acid: HCO3−(aq)+H2O(l)⇌CO32−(aq)+H3O+(aq); acting as a base: HCO3−(aq)+H2O(l)⇌H2CO3(aq)+OH−(aq).
What is the self-ionisation constant of water (Kw), and what is its numerical value at 298K (25∘C)?
The self-ionisation constant of water represents the equilibrium for the autoionisation reaction 2H2O(l)⇌H3O+(aq)+OH−(aq), given by Kw=[H+][OH−]. At 298K, Kw=1.00×10−14mol2dm−6.
What is a buffer solution, and how does an acidic buffer counteract the addition of small amounts of strong acid or base?
A buffer solution consists of a weak acid and its conjugate base (or a weak base and its conjugate acid) that resists changes in pH when small amounts of acid or base are added. When H3O+ is added, the conjugate base (A−) reacts to consume it (A−+H3O+→HA+H2O). When OH− is added, the weak acid (HA) reacts to consume it (HA+OH−→A−+H2O).
What mathematical relationships connect Ka, Kb, pKa, and pKb for a conjugate acid–base pair in aqueous solution at 298K?
For any conjugate acid–base pair in water at 298K, Ka×Kb=Kw=1.00×10−14 and pKa+pKb=14, where pKa=−log10(Ka) and pKb=−log10(Kb).
What defines the pH range over which an acid–base indicator changes colour, and at what point does the colour transition occur?
An acid–base indicator is a weak acid (HIn) in equilibrium with its conjugate base (In−) of a different colour: HIn(aq)+H2O(l)⇌In−(aq)+H3O+(aq). The colour transition occurs at the end point where [HIn]=[In−] and pH=pKa. Most indicators exhibit a visible colour change over a pH range of approximately pKa±1.
What is the difference between the equivalence point and the end point in an acid–base titration?
The equivalence point is the exact point in a titration where the moles of standard titrant added react completely with the analyte in stoichiometric proportions according to the balanced equation (n(H+)=n(OH−)). The end point is the physical point where the indicator changes colour, which should be selected to coincide as closely as possible with the equivalence point.
What criteria must a substance meet to be suitable as a primary standard in volumetric analysis?
A primary standard must have high purity to prevent side reactions, high stability in air and solution (non-reactive with atmospheric gases), a high molar mass to minimise weighing errors, no water of hydration to prevent changes in composition due to humidity, and high solubility in water.
Why does the electrical conductivity drop and then rise during a conductometric titration of a strong acid (HCl) with a strong base (NaOH)?
Initial conductivity is high due to highly mobile H+ ions. As NaOH is added, highly conductive H+ ions react with OH− to form un-ionised H2O, being replaced by less mobile Na+ ions, causing conductivity to fall to a minimum at the equivalence point. Beyond equivalence, adding excess NaOH adds highly conductive OH− ions, causing conductivity to rise sharply.
How are oxidation and reduction defined in terms of electron transfer and oxidation states?
Oxidation is the loss of electrons, corresponding to an increase in oxidation state. Reduction is the gain of electrons, corresponding to a decrease in oxidation state.
What are the roles, polarities, and processes occurring at the electrodes in a galvanic cell?
In a galvanic cell, the anode is the negative electrode where oxidation occurs, releasing electrons into the external circuit. The cathode is the positive electrode where reduction occurs, receiving electrons from the external circuit.
What is the purpose of the salt bridge in a galvanic cell, and how do its ions migrate?
The salt bridge completes the internal circuit and maintains electrical neutrality in each half-cell. Anions from the salt bridge migrate towards the anode half-cell to balance the accumulation of positive metal cations formed by oxidation, while cations migrate towards the cathode half-cell to replace the cations consumed by reduction.
How is the standard cell potential (Ecell∘) calculated from half-cell reduction potentials, and what does its sign indicate?
The standard cell potential is calculated using Ecell∘=Ereduction∘−Eoxidation∘. A positive Ecell∘ indicates that the redox reaction will proceed spontaneously under standard conditions (298K, 100kPa, 1.0mol L−1).
What are two key limitations of using standard reduction potentials (E∘) to predict spontaneous redox reactions?
How do galvanic cells and electrolytic cells differ in terms of spontaneity, energy transformation, and electrode polarity?
Galvanic cells convert chemical potential energy into electrical energy through a spontaneous reaction (Ecell∘>0), with a negative anode and a positive cathode. Electrolytic cells use an external electrical potential difference to drive a non-spontaneous reaction (Ecell∘<0), with a positive anode and a negative cathode.
What is Faraday's first law of electrolysis, and what mathematical relationships express it?
Faraday’s first law states that the mass of a substance produced or consumed at an electrode during electrolysis is directly proportional to the quantity of electricity (q) that passes through the cell. The formulas are q=I×t and q=n(e−)×F, where F=96485C mol−1.
Why does the electrolysis of concentrated aqueous NaCl produce chlorine gas at the anode, while dilute NaCl produces oxygen gas?
The standard oxidation potential of water (E∘=−1.23V) is slightly less negative than that of chloride (E∘=−1.36V). In concentrated solutions (>2mol L−1), the high concentration of Cl− ions makes the oxidation of chloride kinetically and thermodynamically favoured, evolving Cl2(g). In dilute solutions (<0.1mol L−1), the low abundance of Cl− makes water oxidation the primary reaction, evolving O2(g).
What is Markovnikov’s rule regarding the addition of unsymmetrical reagents (HX or H2O) to unsymmetrical alkenes?
Markovnikov’s rule states that when an unsymmetrical reagent (such as a hydrogen halide or water) adds across the double bond of an unsymmetrical alkene, the hydrogen atom preferentially bonds to the carbon atom that is already bonded to the greater number of hydrogen atoms, producing the major product.
How do primary, secondary, and tertiary alcohols differ in their behaviour during oxidation with acidified potassium dichromate (K2Cr2O7/H+)?
Primary alcohols are oxidised first to aldehydes and then further oxidised to carboxylic acids (colour changes from orange to green). Secondary alcohols are oxidised to ketones (colour changes from orange to green). Tertiary alcohols have no hydrogen on the hydroxyl-bearing carbon and resist oxidation, showing no colour change.
How can bromine water (Br2(aq)) be used as a chemical test to distinguish between alkanes and alkenes?
When added to an alkene, brown bromine water rapidly decolourises to colourless in the absence of light due to an addition reaction across the double bond forming a dihaloalkane. With an alkane, no rapid addition can occur; substitution requires ultraviolet (UV) light, so the solution remains brown in normal laboratory conditions.
What reagents, conditions, and reaction type are required to synthesize an ester from a carboxylic acid and an alcohol?
The synthesis is an esterification (condensation) reaction where the carboxylic acid and alcohol are heated under reflux in the presence of a concentrated sulfuric acid (H2SO4) catalyst. The reaction is reversible and eliminates a water molecule to form an ester link (−COO−).
What is the structural difference between low-density polyethene (LDPE) and high-density polyethene (HDPE)?
LDPE contains significant chain branching, which prevents the polymer chains from packing closely together, resulting in an amorphous structure with weak dispersion forces, lower density, flexibility, and a lower melting point. HDPE consists of linear, unbranched chains that pack closely into an ordered crystalline structure with strong dispersion forces, resulting in high density, rigidity, and greater tensile strength.
What are the structural distinctions among isotactic, atactic, and syntactic polypropene?
In isotactic polypropene, all methyl (−CH3) side groups are arranged on the same side of the carbon backbone, allowing close packing and high crystallinity. In atactic polypropene, methyl groups are randomly arranged, preventing regular packing and producing a soft, amorphous polymer. In syntactic polypropene, methyl groups alternate regularly above and below the chain.
What is a zwitterion, and what electrical charge does an amino acid carry in acidic (pH<pI) versus basic (pH>pI) environments?
A zwitterion is a dipolar ion formed when the basic amino group (−NH2) accepts a proton to become −NH3+ while the acidic carboxyl group (−COOH) donates a proton to become −COO−, resulting in zero net charge at the isoelectric point (pI). In acidic conditions (pH<pI), the carboxylate group is protonated, yielding a net positive cation. In basic conditions (pH>pI), the ammonium group is deprotonated, yielding a net negative anion.
What is the formula and definition for the retention factor (RF) in thin-layer chromatography (TLC)?
The retention factor (RF) is the ratio of the distance moved by the individual component (e.g. amino acid) to the distance moved by the solvent front from the origin: RF=distance moved by the solventdistance moved by the amino acid. It is always a value between 0 and 1 under identical conditions.
How does gel electrophoresis separate amino acids, and how does the buffer pH relative to the isoelectric point (pI) govern migration?
Gel electrophoresis separates charged species in an electric field based on their net charge, molecular mass, and shape. If the buffer pH<pI, the amino acid exists as a positive cation and migrates toward the negative cathode. If the buffer pH>pI, it exists as a negative anion and migrates toward the positive anode. At pH=pI, the amino acid has no net charge and does not migrate.
In mass spectrometry, what do the molecular ion (M+∙) peak and the base peak represent?
The molecular ion (M+∙) or parent ion peak represents the intact original molecule that has lost a single electron without fragmenting, providing the molecular mass of the compound. The base peak is the most abundant fragment ion formed during ionisation and is assigned a relative abundance of 100%.
How does infrared (IR) spectroscopy distinguish an alcohol from a carboxylic acid?
Alcohols show a strong, broad absorption band at 3200–3600cm−1 due to the alcoholic O−H stretch and have no carbonyl peak. Carboxylic acids exhibit a very broad O−H stretch spanning 2500–3000cm−1 accompanied by a strong, sharp C=O carbonyl absorption band at 1700–1750cm−1.
What are the chemical reaction, enthalpy change, and optimal compromise conditions for the Haber process?
The reaction is N2(g)+3H2(g)⇌2NH3(g) (ΔH=−92.4kJ mol−1). The industrial compromise conditions are a temperature of 400–450∘C, a pressure of 200atm, and a porous iron/iron oxide catalyst to achieve a satisfactory reaction rate and economical yield without excessive plant operating costs.
Why is sulfur trioxide dissolved in concentrated sulfuric acid rather than water in Step 3 of the contact process?
Direct addition of sulfur trioxide to water is extremely exothermic and produces a fine, uncontrollable mist or fog of sulfuric acid that cannot be easily condensed. Dissolving SO3 into concentrated H2SO4 forms oleum (H2S2O7), which can then be safely diluted with water to produce concentrated H2SO4.
What are the anode and cathode half-equations for a hydrogen fuel cell operating with an acidic electrolyte?
At the anode (oxidation): 2H2(g)→4H+(aq)+4e− (E∘=0.00V). At the cathode (reduction): O2(g)+4H+(aq)+4e−→2H2O(l) (E∘=+1.23V). The overall cell reaction is 2H2(g)+O2(g)→2H2O(l) with Ecell∘=+1.23V.
How are percentage error and percentage uncertainty calculated when evaluating experimental data?
Percentage error evaluates accuracy against a theoretical value: Percentage error (%)=true valuemeasured value−true value×100. Percentage uncertainty evaluates the relative precision of a measurement: Percentage uncertainty (%)=measured valueabsolute uncertainty×100.