1/8
Vocabulary flashcards covering key definitions, formulas, and physical quantities from the Grade 10 Physics unit on work and power.
Efficiency (H)
The ratio representing the percentage of useful work relative to total work, shown in the notes as H=14.148.97=63.44% (with total work noted as Atp=14.4J).
Free fall time (t)
The duration of free fall from rest across a displacement s, calculated using the formula t=g2s, which gives t=102×180=6s for a height of 180m with g=10m/s2.
Work of gravity in the last 2s (Ap)
The work done by gravity over the final 2s of motion for an 8kg object dropped from 180m, calculated as Ap=m⋅g⋅h=8×10×100=8000J, where the object is at an altitude of 100m after falling 80m during the first 4s.
Traction force in constant upward motion (F)
The upward engine force acting on a vertically moving aircraft at constant speed, which balances weight: F=P=mg=(5×103)×10=5×104N.
Engine work in constant upward motion (A)
The mechanical work performed by an aircraft engine during uniform straight-line upward motion to an altitude of 1440m, calculated as A=F⋅h=(5×104)×1440=72×106J.
Vertical acceleration from rest (a)
The acceleration of an aircraft ascending from rest to a height of h=1440m in 2minutes (120s), determined by a=t22h=(120)22×1440=0.2m/s2.
Pulling force during accelerated ascent (Fk)
The engine force required to accelerate a 5×103kg helicopter vertically upward against gravity, given by Fk=ma+mg=m(a+g)=(5×103)×(0.2+10)=51000N.
Engine work during accelerated ascent (A)
The work performed by the engine during uniformly accelerated upward motion across s=1440m, calculated as A=Fk⋅s=51000×1440=73.44×106J.
Inclined plane vehicle parameters (Question 5)
The physical quantities defined for an automobile driving uphill: mass m=2tons, inclination angle α=30∘, constant velocity v=10.8km/h, and engine power P=60kW.