1/46
Looks like no tags are added yet.
Phorometry
Tests of accommodation and vergence performed with the phoropter after manifest refraction
All subjective tests and not for strabs (operate under assumption pt can fuse)
Order of distance testing
Horizontal phoria
Vertical phoria
Horizontal vergence amplitudes (BI then BO)
Vertical vergence amplitudes (only if vertical phoria found)
Order of near testing
Check near VA
Horizontal phoria
Vertical phoria
Horizontal vergence amplitudes (BI then BO)
Vertical vergence amplitudes (only if vertical phoria is found)
BCC
NRA/PRA
Phoria measurement
Not a replacement for CT (cannot identify strab)
Subjective test → Amount of deviation pt perceives
Why do we also measure phoria in the phoropter?
Magnitude of phoria can vary with change in refraction → Measure prior to prescribing
Large phorias may cause asthenopia or intermittent diplopia
Horizontal phoria testing conditions
Pt viewing through manifest dist refraction
Risley prism OU (0 OD, 6 BU OS)
Dist target is a single letter 2-3 times larger than threshold
For horizontal phoria measurement, the prism over OD is _____ and the prism over OS is _____
Measuring, dissociating
Horizontal phoria procedure
Slowly increase prism in BI direction until pt says they’re lined up (note prism diopters)
Increase prism 12pd in BO direction
Approach from other side until pt says they’re lined up (note prism diopters)
Take midpoint as final phoria documentation
Document XP/EP not BI/BO
How to know if pt is trying to fuse the targets
Targets move when pt reports it lined up
Measurements differ by more than a few pd
Use the flash technique
Vertical phoria testing conditions
Pt viewing through manifest dist refraction
Risley prism OU (Horizontal phoria + 12BI OD and 6BU OS)
Dist target is a single letter 2-3 times bigger than threshold
For vertical phoria measurement, the prism over OD is _____ and the prism over OS is _____
Dissociating, measuring
Vertical phoria procedure
Slowly decrease prism until pt says targets are lined up (note prism diopters)
Increase prism 6pd in BD direction
Slowly decrease prism until pt says targets are lined up (note prism diopters)
Take midpoint and document findings, must include an eye
Vertical phoria tips
Move slowly (vertical phorias are small)
Shouldn’t need to flash
Doubt findings (tilted phoropter or pt can influence findings)
Vergence
Movements of the eyes in opposite directions
Fusional vergence
Eye movements that are made to keep the fovea of both eyes directed at the target to maintain single vision
Accommodative vergence
Increasing accommodation causes convergence
Decreasing accommodation causes divergence
Near triad
Increase in accommodation
Convergence
Pupil constriction
Components will reverse for distance viewing
Increasing accommodation drives…
Convergence
Can help gain additional convergence beyond the available fusional convergence ability
Relaxing accommodation results in…
Divergence
Can help gain additional divergence beyond available fusional divergence ability
The larger the vergence ranges…
The easier it is to tolerate a large phoria
Vergence ranges
Gives info about pts binocular vision status
Can be trained and increased (convergence easier to train than divergence)
Horizontal vergence amplitudes endpoints (3)
Blur: Pt runs out of fusional vergence and changes their accommodation to maintain single vision instead
Break: Pt runs out of fusional and accommodative vergence and sees double
Recovery: Prism is decreased enough that pt can fuse and regain single vision
For horizontal vergence amplitudes, which is performed first? BI or BO?
BI
BI is “relaxing” → Pt relaxes accommodation to gain additional divergence
BO is “stimulating” → Pt increases accommodation to gain additional convergence
Horizontal vergence amplitude testing conditions
Pt viewing through manifest dist refraction
Risley prism over each eye set at 0
Target is vertical line of letters 1-2 sizes larger than threshold
Horizontal vergence amplitude procedure
Slowly introduce BI simultaneously OU until pt reports blur/double (note prism diopters)
Slowly decrease BI prism until pt reports single
Do you expect blur on horizontal distance BI ranges?
No, pt is not accommodating to see at distance → No accommodation to relax
Do you expect blur on horizontal distance BO ranges?
Yes, pt increases accommodation to maintain single vision after fusional convergence runs out
Morgan’s Norms
BI 7/4
BO 9/19/10
Does not consider pts binocular status, large exophoria may not have adequate ranges
For exophoria the concerned vergence range is…
BO
Eye wants to rest out → Convergence to overcome
For esophoria the concerned vergence range is…
BI
Eye wants to rest in → Divergence to overcome
Sheard’s Criterion
Pt should have concerned vergence ranges 2x the magnitude of the phoria for comfortable vision
To do vergence ranges pt must be fused (already overcame phoria) → Criterion says they need an additional 2x vergence range to be comfortable
ex. 10XP at distance would need 20pd of BO range (blur or break at 20)
If reached max prism value on horizontal vergence amplitude and pt is still seeing double…
Pt could have vergence ranges greater than 40pd (more likely for BO/exo) or pt has broken but suppressed an eye
Ask if target is straight ahead or moving
Straight ahead → Fused
Moving → Suppression
If a pt has ranges over 40pd in horizontal vergence amplitudes…
Cover an eye for 3 seconds to disrupt fusion and ask if they see double when you uncover
See single → Recovery is also 40+pd
Sustained diplopia → Decrease prism to find recovery
If a pt has ranges over 40pd in horizontal vergence amplitudes BUT they’re suppressing…
Start over from 0pd and tell pt to report when target begins to move and in what direction
Slowly introduce prism and note values for break
Not possible to document a suppressing eye, document by analyzing direction of movement
Documenting which eye is suppressing in horizontal vergence amplitudes
BO testing: Target moves right → Suppression of OD; Target moves left → Suppression of OS
BI testing: Target moves right → Suppression of OS; Target moves left → Suppression of OD
If a pt breaks on horizontal vergence testing and they still see double after reaching 0pd…
Continue moving beyond 0 and report negative number for recovery
Vertical vergence amplitude
Only done if pt has a vertical phoria
Do not ask if blur (pt cannot vary accommodation to gain more vertical vergence)
Expect smaller values than horizontal vergence
BD prism tests…
Supravergence
BU prism tests…
Infravergence
Vertical vergence amplitude testing conditions
Pt viewing through dist manifest refraction
Risley prisms over one eye in vertical orientation
Target is horizontal line of letters 1-2 sizes bigger than threshold
Vertical vergence amplitude procedure
Introduce prism SLOWLY, tell pt to report when letters first start to double (note prism diopters)
Decrease prism SLOWLY, tell pt to report when letters are single (note prism diopters)
Repeat for infravergence by introducing BU prism
Do you expect blur on vertical vergence amplitudes?
No, break/recovery only is documented
Will you ever test vertical vergence amplitude for both eyes?
No
Will you ever test vertical vergence amplitudes by introducing prism OU?
No
Pt who does not have vertical phoria…
Expected to have symmetrical vergence ranges
Asymmetric supra and infravergence findings
Suggest a long standing vertical phoria, helpful in confirming Von Graefe phoria findings
Midpoint of vertical vergence break values will be in the same base direction as what is used to neutralize the phoria
Ex. Find the vertical phoria if a pt had BD OD = 5/3 and BU OS 2/1
Midpoint is 1.5BD OD
1.5pd RHyperP