1/78
Looks like no tags are added yet.
How should you position your partner before measuring resting heart rate (HR) and blood pressure (BP)?
Rest seated quietly for 5 minutes, back supported, feet flat and legs uncrossed.
How do you palpate the radial pulse?
Place the pads of your index and middle fingers on the thumb side of the wrist. Press gently.
You count 38 regular beats in 30 seconds. What resting HR do you record?
76 bpm. Double the 30-second count.
How long should you count an irregular resting pulse?
Count for a full 60 seconds.
Where should the arm and cuff be for resting BP?
Support the bare upper arm at heart level. Choose a cuff that fits its circumference and align the artery marker over the brachial artery.
How do you estimate systolic BP by palpation?
Feel the radial pulse while inflating the cuff. Note the pressure where the pulse disappears, then fully deflate.
How high do you reinflate the cuff after estimating systolic BP?
20-30 mmHg above the palpated estimate.
Where do you place the stethoscope for manual BP?
Over the brachial artery at the elbow crease.
How fast should the cuff deflate during a BP reading?
About 2 mmHg per second. Faster deflation can cause you to miss the first or last sound.
Tapping begins at 118 mmHg and disappears at 72 mmHg. What do you report?
118/72 mmHg. The first repeated taps mark systolic BP. Disappearance marks diastolic BP.
How do you position a participant at the stadiometer?
Shoes off, heels together, feet flat, arms relaxed and gaze straight ahead. Bring heels, buttocks and head against the upright as able.
How do you take the final stadiometer reading?
Ask the participant to inhale deeply and hold. Lower the headboard onto the crown, compress the hair and read height in cm.
How do you prepare and read a mechanical beam scale?
Zero and balance it first. Center the participant with weight evenly distributed. Adjust the large weight, then the small weight, and add both readings when the pointer balances.
The beam-scale pointer hits the top of the window. What do you change?
Increase the selected weight until the pointer balances in the middle.
How do you calculate BMI from metric measurements?
BMI = weight in kilograms ÷ height in meters squared. Report in kg/m².
How do you convert pounds and inches for a BMI calculation?
Divide pounds by 2.205 to get kg. Multiply inches by 2.54 to get cm, then divide by 100 to get meters.
Where and when do you read waist circumference?
Place the tape horizontally just above the iliac crest. Read at the end of a normal exhalation.
Where do you measure hip circumference?
Around the maximal circumference of the buttocks, with the tape level all the way around.
How tight should a circumference tape be, and how precisely do you read it?
Snug without indenting the skin. Record to the nearest 0.1 cm.
Waist trials are 84.1 and 84.8 cm. What next?
Measure again. The 0.7 cm difference exceeds the 0.5 cm repeat threshold.
A waist is 116 cm and hips are 100 cm. What is the waist-to-hip ratio?
1.16. Divide waist by hip using the same units.
How do you prepare a participant for skinfold measurements?
Use the right side with dry, lotion-free skin before exercise. Mark each site and relax the underlying muscle.
What do you lift when pinching a skinfold?
Grasp skin and subcutaneous fat between thumb and index finger. Keep the underlying muscle relaxed.
Where do the caliper jaws go relative to your fingers and the fold?
Perpendicular to the fold, about 1 cm from your fingers and halfway between the base and crest.
When do you read and release a skinfold?
Keep holding the fold, release the handle to apply pressure, then read after 1-2 seconds. Open the jaws before releasing the fold.
How do you sequence and record skinfold trials?
Rotate through sites in a circuit. Obtain at least two readings per site and record in millimeters.
Triceps skinfold trials are 14 and 17 mm. What next?
Return to the site for another reading. The 3 mm difference exceeds the 2 mm repeat threshold.
What distinguishes active from passive range of motion (ROM)?
For active ROM, the participant moves the joint. For passive ROM, the participant relaxes while the examiner guides it.
How do you choose the correct goniometer scale?
Check the starting angle before movement. Follow the scale from that starting value as the joint moves.
What do you document after measuring ROM?
Record the side, joint, movement, active or passive ROM, and range in degrees.
How many ROM trials does Lecture 11 recommend?
Three trials after a general warm-up and stretching. Use the best score for comparison.
The foot begins at a right angle to the shin and moves 15° toward it. What do you report?
15° of ankle dorsiflexion. The starting right angle represents 0° of ankle motion.
When do you add resistance during manual muscle testing (MMT)?
After the participant completes the movement against gravity. Position the limb, cue them to hold, and apply resistance gradually.
What do you report after MMT?
Side, joint movement and grade out of 5. For example, right knee extension, 4/5.
Where and in which direction do you take the abdomen skinfold?
Vertical fold. 2 cm right of the umbilicus.
Where and in which direction do you take the triceps skinfold?
Vertical fold. Back of upper arm, halfway between acromion and olecranon. Let the arm hang loose.
Where and in which direction do you take the chest skinfold?
Diagonal fold. From anterior axillary line toward nipple: halfway for men, one-third of the distance for women.
Where and in which direction do you take the midaxillary skinfold?
Vertical fold. Midaxillary line at the level of the xiphoid process.
Where and in which direction do you take the subscapular skinfold?
Diagonal fold. 1-2 cm below the inferior angle of the scapula.
Where and in which direction do you take the suprailiac skinfold?
Diagonal fold. Just above the iliac crest, in line with the anterior axillary line.
Where and in which direction do you take the thigh skinfold?
Vertical fold. Front midline of thigh, halfway between hip crease and top of patella. Shift weight to opposite leg.
How do you position your partner for hip flexion and extension ROM?
Hip flexion supine; extension prone. Stabilize same-side pelvis.
Where is the goniometer axis for hip flexion and extension?
Greater trochanter.
How do you align the two goniometer arms for hip flexion and extension?
Stationary: Lateral midline of pelvis. Moving: Lateral femur toward lateral epicondyle.
How do you position your partner for knee flexion and extension ROM?
Knee flexion / extension, supine. Stabilize femur.
Where is the goniometer axis for knee flexion and extension?
Lateral femoral epicondyle.
How do you align the two goniometer arms for knee flexion and extension?
Stationary: Lateral femur toward greater trochanter. Moving: Along fibula toward lateral malleolus.
How do you position your partner for ankle plantarflexion and dorsiflexion ROM?
Ankle plantarflexion / dorsiflexion, supine. Knee bent 20-30°, foot off table. Stabilize lower leg.
Where is the goniometer axis for ankle plantarflexion and dorsiflexion?
Lateral malleolus.
How do you align the two goniometer arms for ankle plantarflexion and dorsiflexion?
Stationary: Lateral fibula toward fibular head. Moving: Parallel to fifth metatarsal.
How do you position your partner for shoulder flexion ROM?
Shoulder flexion, supine. Palm toward body; allow scapular movement.
Where is the goniometer axis for shoulder flexion?
Acromion process.
How do you align the two goniometer arms for shoulder flexion?
Stationary: Midaxillary line of trunk. Moving: Lateral humerus toward lateral epicondyle.
How do you position your partner for elbow flexion and extension ROM?
Elbow flexion / extension, supine. Stabilize humerus; palm up.
Where is the goniometer axis for elbow flexion and extension?
Lateral humeral epicondyle.
How do you align the two goniometer arms for elbow flexion and extension?
Stationary: Lateral midline of humerus. Moving: Along radius toward radial styloid.
How do you position your partner for forearm pronation ROM?
Forearm pronation, seated. Elbow at side, bent 90°, thumb up; hold humerus.
Where is the goniometer axis for forearm pronation?
Lateral to ulnar styloid.
How do you align the two goniometer arms for forearm pronation?
Stationary: Parallel to anterior midline of humerus. Moving: Across dorsal forearm just proximal to styloids.
How do you position your partner for forearm supination ROM?
Seated, elbow held against the side at 90°, thumb up. Stabilize the humerus.
Where is the goniometer axis for forearm supination?
Medial to ulnar styloid.
How do you align the two goniometer arms for forearm supination?
Stationary: Parallel to anterior midline of humerus. Moving: Across ventral forearm just proximal to styloids.
Which muscles does the hip flexion MMT test?
Iliacus, psoas major.
How do you position and stabilize your partner for the hip flexion MMT?
Supine. Opposite foot flat, knee bent. Stabilize same-side iliac crest.
Where and in which direction do you apply resistance for the hip flexion MMT?
With test knee bent 90°, press front of thigh just above knee toward hip extension.
Which muscles does the hip extension MMT test?
Gluteus maximus and hamstrings.
How do you position and stabilize your partner for the hip extension MMT?
Prone. Test knee straight, leg externally rotated. Stabilize posterior pelvis.
Where and in which direction do you apply resistance for the hip extension MMT?
As thigh lifts, press back of thigh just above knee toward hip flexion.
Which muscles does the knee flexion MMT test?
Biceps femoris, semitendinosus, semimembranosus.
How do you position and stabilize your partner for the knee flexion MMT?
Prone, test knee at 90°. Stabilize thigh just above knee.
Where and in which direction do you apply resistance for the knee flexion MMT?
Press back of lower leg just above ankle toward knee extension.
Which muscles does the knee extension MMT test?
Rectus femoris and vastus lateralis, medialis, intermedius.
How do you position and stabilize your partner for the knee extension MMT?
Seated, thigh horizontal. Stabilize thigh just above knee.
Where and in which direction do you apply resistance for the knee extension MMT?
Press front of distal lower leg toward knee flexion to oppose straightening.
Which muscles does the shoulder flexion MMT test?
Anterior deltoid.
How do you position and stabilize your partner for the shoulder flexion MMT?
Seated. Raise arm to 90° with slight abduction and internal rotation. Stabilize scapula and clavicle.
Where and in which direction do you apply resistance for the shoulder flexion MMT?
Press front and inner upper arm just above elbow toward shoulder extension.
Which muscles does the shoulder extension MMT test?
Latissimus dorsi, teres major.
How do you position and stabilize your partner for the shoulder extension MMT?
Prone, palms up. Stabilize same-side scapula.