1/75
Looks like no tags are added yet.
Bt crops
Genetically modified plant that have been engineered to contain bacterial gene (from Bacterium thuringiensis) that allows them to produce delta-endotoxin, a toxin lethal to corn pests.
Candidate gene
gene suspected of playing a direct or indirect role in a specific biological trait, physical characteristic, or disease based on its known cellular function or genomic location
Introns
non-coding region of gene
exons
coding region of gene; region that is retained in transcription into RNA
How are genes altered to be functional in a non-native organism?
First by removing any non-coding regions (introns) and replacing the gene’s native promoter and terminator sequence.
Promoter
specific region of DNA located upstream (5’ end) of a gene that serves as the initial binding site for RNA polymerase and transcription factors; promotes transcription of specific gene when activated.
Terminator
specific region of DNA that serves as stop signal for transcription
Why replace promoter and terminator sequence when incorporating gene into non-native host?
The non-native sequences may behave unreliably
Most common promoter incorporated for genetically modified crops?
35S promoter from cauliflower mosaic virus (CaMV 35S)
Why is 35S promoter most commonly used for GMOs?
it is naturally constitutive and is known to activate transcription in all plant cell types.
Most common terminator incorporated for genetically modified crops?
nopaline synthase (NOS) terminator from Agrobacterium tumefaciens
What percent of GMOs contain both NOS terminator and 35S promoter modifications?
85%
How do scientists test to determine if a crop is a GMO?
They test for presence of NOS terminator and 35S promoter sequences in the genome since they are added to 85% of all GMOs.
First step in introducing a foreign gene into a plant genome?
first isolate single cells from the parent plant and grow them on a specialized medium that causes them to form a clump of undifferentiated cells called a callus
Second step in introducing a foreign gene into a plant genome?
Engineered gene is then transferred to the callus through a variety of methods which must be able to pass the plants cell wall, plasma membrane, and nuclear membrane
Third step in introducing a foreign gene into a plant genome?
Successfully transformed cells are identified using selectable markers then cells are induced with plant hormones to differentiate and grow into complete plants.
How is Agrobacterium tumefaciens used to incorporate a candidate gene into a non-native plant cell?
the plant is exposed to a genetically modified version of the bacterium; this bacteria is known for causes gall disease by inserting some of its DNA into host’s cells genome, the GM version of this exploits this mechanism without causing disease.
Electroporation method for inserting gene into non-native plant cell
an electrical current creates pores within the cellular membranes to allow entry of the engineered DNA
“gene gun” method for inserting gene into non-native plant cell
physically shoots gold particles coated with engineered DNA into plant cells.
Selectable markers
molecular markers used to identify cells that successfully integrated candidate foreign genes into their genome. important since efficiency of transformation is relatively low.
What are common markers used as selectable markers for GMOs?
Examples are antibiotic resistance or visual markers such as gene for Green Fluorescent Protein
How did we determine if a plant was a GMO in lab?
We used polymerase chain reaction (PCR) to identify sequences of DNA that have been inserted into GM plant (testing for presence of NOS terminator and 35S promoter)
Six steps of genetically modifying a crop?
Isolate plant cells
Grow undifferentiated callus
Transform callus
Select cells
Redifferentiate callus
Grow transgenic plant
How is ELISA used for testing if a crop is GMO?
ELISA is an antibody-based test that can identify specific proteins produced only by GM plants
Limitations of using ELISA to test for GMOs?
Can only test fresh produce (due to protein degradation during food processing), and tests must be individualized according to the type of crop testing (since test is identifying specific protein presence rather than specific DNA fragment).
Benefits of using ELISA to test for GMOs?
Inexpensive, accurate, and requires little experience.
How is PCR used for testing if a crop is GMO?
it identifies sequences of DNA that have been inserted into the GM plant
Benefits of using PCR to test for GMOs?
can be used on both fresh and processed foods (since DNA molecules are better conserved than proteins), modified version of PCR can be used to also quantitate the percentage of GM material (real-time PCR), and a single PCR test can be used to detect 85% of all GM crops.
General steps for detecting GMOs by PCR?
grind food sample
extract DNA
determine if plant cell DNA was extracted by checking for PSII chloroplast gene by PCR
determine if DNA is GM by checking for 35S promoter and NOS terminator by PCR
quantify GM content by real-time PCR
How to determine if target sequences were present in genome and amplified by PCR?
PCR products are electrophoresed on a gel and stained to visualize DNA as bands. A molecular weight ruler (DNA ladder) is included with the samples to determine sizes of DNA bands.
Expected DNA fragment size on gel electrophoresis after PCR with plant primers?
455bp
Expected DNA fragment size on gel electrophoresis after PCR with GMO primers?
200bp (if present)
Should both GM and non-GM crops have DNA amplified during PCR test with plant primers?
Yes; this verifies DNA was successfully extracted from the food
Most common crops to be genetically modified?
corn and soy-based products
Purpose of adding ground food samples into InstaGene matrix when preparing to test if sample is GM?
when grinding food sample, cellular contents that are released contain enzymes (DNases) that can degrade the DNA; InstaGene matrix has negatively charged microscopic beads that “chelate” metal ions out of the solution (such as Mg²+) which prevents DNA degradation
How is extracted DNA removed from InstaGene matrix solution?
Sample is centrifuged and the supernatant will contain intact extracted DNA
What are the four essential components of PCR?
dNTPs (DNA base pair subunits; dATP, dCTP, dGTP, and dTTP)
two DNA primers
DNA polymerase
DNA template in minute quantities
What ability of PCR are we exploiting in this lab (GMO lab)?
The ability of PCR to identify a single DNA sequence/fragment consisting of only a few hundred bp from a background of billions of bps
How does PCR locate specific DNA sequences?
Using two lab-synthesized primers (forward and reverse). Each has a specific nucleotide sequence allowing it to anneal (bind) to complementary bases at opposite ends of the target sequence—one on the forward template strand and one on the reverse template strand.
What is a primer?
Short strands of DNA (usually between 6 and 30bp long) called oligonucleotides
How many primers required for PCR?
Two: one forward and one reverse
What enzyme replicates the target DNA sequence in PCR?
DNA polymerase
How does DNA polymerase function?
reads the complementary strand of template DNA and adds nucleotides to the 3’ ends of the primers; can only add nucleotides to double stranded DNA.
General process of PCR?
Denaturation: dsDNA template is separated through high heat (94°C) into two single strands
Annealing: each primer binds to its complementary sequence on each of the separated DNA strands (59°C)
Elongation: DNA polymerase adds nucleotides on each primer to make a new dsDNA sequence (72°C)
Cycle repeats 40x
What DNA polymerase is used in PCR?
Taq DNA polymerase
Why is Taq DNA polymerase used in PCR?
Because the reaction is heated to 94°C during PCR; Taq polymerase is heat stable since it is derived from Thermus aquaticus
What prevents the separated single stranded DNA sequence from re-binding to its complementary strand during annealing step of PCR before primers bind?
Because the primers are so much shorter than the template DNA, they will anneal much faster than the long template DNA strands at this temperature (59°C).
Optimal temperature for DNA polymerase?
72°C
What end of DNA sequence does DNA polymerase add new nucleotides?
3’ end of primer
How does PCR machine work?
There is an aluminum block inside the machine that can be rapidly heated and cooled; this process is called thermal cycling.
How many new DNA strands are synthesized during each PCR cycle?
Two new template DNA strands are created from each original double stranded template; causes exponential growth
What is the purpose of the plant primer only PCR control?
If you amplify DNA using the plant primers, you can conclude that you successfully amplified DNA, therefore whether or not you amplify DNA with your GMO primers, you will have more confidence in the validity of your result.
What is the purpose of the non-GMO food control run in the GM plants primer PCR cycle?
In case some GMO-positive DNA got into the InstaGene or master mix from a dirty pipet tip or a previous class. This DNA could be amplified in your test food PCR reaction and give you a false result. By having a known non-GMO control that you know should not amplify the GMO target sequences, you can tell if your PCR reactions have been contaminated by GMO-positive DNA.
How did we determine if we had successful PCR products in lab?
gel electrophoresis
What type of gels did we consider for gel electrophoresis during GMO lab?
3% agarose gel or polyacrylamide gel (Polyacrylamide gel electrophoresis AKA PAGE).
Why did we select different gels from the standard 1% agarose gel we typically use during our GMO lab?
because the PCR product bands for this experiment are very small compared to the DNA bands in previous experiments; a tighter gel matrix was necessary for successful separation.
What stain did we use to visualize DNA bands in gel electrophoresis during GMO lab?
Fast Blast stain
What enzyme did we focus on during enzyme kinetics lab?
Cellobiase
What does cellobiase do?
enzyme that hydrolyzes cellobiose and other beta-glucosidic oligosaccharides into glucose monomers.
Cellulosic ethanol
an efficient, more sustainable fuel compared to petroleum that is produced as a byproduct when cellubiase breaks down cellubiose
active site of enzyme
cleft in the protein where chemical reaction takes place
What is the critical structural component of enzymes that determines the activity of the enzyme?
the charge and position of R groups (variable side chains) of the amino acids.
What is the reactant in an enzyme catalyzed reaction called?
a substrate
How does a substrate bind to an enzyme?
The amino acids facing the active site of the enzyme are attracted to the chemical groups on the substrate.
How does an enzyme speed up a reaction?
by positioning the substrate in such a way that the transition state of the reaction is stabilized; this reduces the energy needed to make the reaction occur (activation energy) and allows the reaction to occur at a much faster rate.