1/116
Looks like no tags are added yet.
What does CM stand for?
Configuration Management
What’s the main goal of CM?
Keeping the product and its documentation matching at all times
What does CM control?
Changes to a product’s performance, functional, and physical characteristics
When is CM applied?
Throughout the product’s life cycle
How many CM functions does the EIA-649 define?
Five
Which CM function describes the CM plan?
Planning and Management
What does a CM plan describe?
What activities, schedules, baselines, approvals, and audits will be done
Which CM function assigns unique IDs to CIs?
Configuration Identification
Which CM function defines baselines?
Configuration Identification
Which CM function approves or rejects changes?
Configuration change management
Which CM function records current and past versions of every item?
Configuration Status Accounting
Which CM function checks that the product matches its documentation?
Configuration Verification and Audit
Configuration Item (CI)
Any item tracked under CM. Could be software, hardware, or a document.
According to EIA-649, why does CM matter?
Poor CM can release incorrect, ineffective, or unsafe products
How does CM benefit stakeholders?
Gives them current data to make decisions from
Baseline
An approved snapshot of a configuration at a point in time
How can a baseline be changed?
Through formal change control
What is an approved baseline used for?
Reference point where all changes are measured against
How many baselines does the DoD use?
Three
What are the baselines the DoD uses?
Functional, allocated, product
How many baselines does NASA use?
Four
What are the baselines that NASA uses?
Functional, allocated, product, as-deployed
What does the functional baseline describe?
What the whole system does. Describes expectations of performance, interfaces, and how it would be verified
What does the allocated baseline describe?
Requirements assigned to each CI
What does the product baseline describe?
Detailed documentation required to build and support each CI
What does the as-deployed baseline describe?
Final configuration in its ready to operate state, with all changes incorporated
Where is the functional baseline set?
SDR (NASA)/SFR (DoD)
Where is the allocated baseline set?
PDR
Where is the product baseline set?
CDR
Where is the as-deployed baseline set?
ORR
Which baseline covers form, fit, and function details?
Product baseline
Which baseline breaks top-level requirements down to each CI?
Allocated baseline
What does SRR stand for?
System Requirements Review
What does SDR stand for?
System Definition Review
What does SDR stand for?
System Definition Review
What does SFR stand for?
System Functional Review
What does PDR stand for?
Preliminary Design Review
What does CDR stand for?
Critical Design Review
What does ORR stand for?
Operational Readiness Review
What order do the reviews go in?
SRR, SDR/SFR, PDR, CDR, ORR
What’s the question that SRR answers?
Do we know exactly what the system must do?
What’s the question that SDR/SFR answers?
Does the overall plan meet the requirements?
What’s the question that PDR answers?
Is the design approach sound for each part?
What’s the question that CDR answers?
Is the detailed design complete enough to build?
What’s the question that ORR answers?
Is it built, tested, and ready to operate?
What is PDR?
Making sure the approach is right
What is CDR?
The details are done and it’s ready to build
What does BOM stand for?
Bill of Materials
What is a BOM?
The structured list of every part, assembly, and document needed to build a product
What does EBOM stand for?
Engineering Bill of Materials
What does MBOM stand for?
Manufacturing Bill of Materials
What are the fields in a BOM?
Level, part number, name, description, quantity, unit of measure, revision
What is a BOM level?
Where a part sits in the hierarchy
What are the levels in part hierarchy?
top assembly, subassembly, or component
What is a multi-level (indented) BOM?
shows assemblies and the subassemblies and parts inside them
Why share only the latest released BOM revision?
So suppliers and manufacturing don't build from outdated parts lists
What is a revision?
A new approved version of an item or document
What is a release?
Making an approved version official and available for use
What does ECR stand for?
Engineering Change Request
What does ECO stand for?
Engineering Change Order
What does ECN stand for?
Engineering Change Notice
What does ECP stand for?
Engineering Change Proposal
What is the purpose of an ECR?
Proposes a change and explains why it's needed
What is the purpose of an ECO?
Formal review and approval of a proposed change
What is the purpose of an ECN?
Communicates that an approved change is happening
What does CCB stand for?
Configuration Change Board
What does the CCB do?
Approves or rejects proposed changes
Who is the chair of the CCB?
Someone with program or project change authority
Who sits on a CCB?
Representatives of the stakeholders affected by changes
What’s the first step in the change process?
Proposing the change
What’s the second step in the change process?
Evaluating the impact of the change on cost, schedule, and other items
What’s the third step in the change process?
The CCB approves/denies changes
What’s the fourth step in the change process?
Implement and release it as a new revision
What’s the fifth step in the change process?
Verify the change was made correctly
What’s the sixth step in the change process?
Update the records
What does a major change affect?
spec, cost, safety, interfaces, or interchangeability
What does a minor change affect?
documentation or processes without affecting interchangeability
What’s the DoD term for a major change?
Class I
What’s the DoD term for a minor change?
Class II
What’s a waiver?
Permission to accept something that doesn't meet a requirement
Do waivers change the baseline?
No
What is a deviation?
Permission to depart from a requirement
When do deviations go into effect?
Before the work is done
When do waivers go into effect?
after or during implementation
What is effectivity?
The point where a change takes effect, by serial number, date, or lot
What is form?
An item's shape, size, and physical characteristics
What is fit?
How an item connects or interfaces with other items
What is function?
What an item does
What kind of change affects form, fit, or function?
A major change
Who must approve a change to an external interface?
All affected stakeholders
What does FCA stand for?
Functional Configuration Audit
What does PCA stand for?
Physical Configuration Audit
What question does the FCA answer?
Does the item perform as its requirements say?
What question does the PCA answer?
Does the item built match its documentation?
What is As-Designed?
What the documentation says the product is
What is As-built?
What was actually made
What does the CM keep matching?
The as-designed and as-built configurations
What is a redline?
hand-marked change on a drawing, waiting to be formally incorporated
What is status accounting?
records what the configuration is
What is an audit?
checks that records are true