1/52
Looks like no tags are added yet.
What is the purpose of the single-breath nitrogen test (SBN₂)?
To assess the distribution of ventilation by analyzing expired nitrogen concentrations after a single breath of 100% oxygen
At what lung volume does expiration end during the SBN₂ test?
Residual volume
What two additional measurements are obtained from the SBN₂ test?
Closing volume (CV) and closing capacity (CC)
What is closing volume (CV)?
The portion of vital capacity that can be exhaled after airway closure begins
How is closing volume usually expressed?
As a percentage of vital capacity (CV/VC) or as a fraction of TLC
What are the normal CV/VC values for young adults and adults aged 50?
Approximately 8% in young adults and 18% at age 50
What does an increased closing volume relative to age indicate?
Premature onset of airway closure
What clinical condition can the SBN₂ test help screen for?
Small airway disease (SAD)
What is closing capacity (CC), and how is it calculated?
The lung volume remaining when airway closure begins. CC = RV + CV
What are the approximate normal CC/TLC values at different ages?
Approximately 30% in young adults and 40% at age 50
What equipment is required for the SBN₂ test?
A spirometer containing 100% oxygen and an N₂ analyzer positioned on the expiratory side
What is the sequence of breathing maneuvers during the SBN₂ test?
Exhale to RV, perform an inspiratory SVC (ISVC) using 100% oxygen, then perform an expiratory SVC (ESVC) to RV
What does each device measure during the SBN₂ test?
The N₂ analyzer measures nitrogen concentration, while the spirometer measures volume
What are the axes on an SBN₂ graph?
Vertical axis: expired N₂ percentage. Horizontal axis: expired volume
What occurs during Phase I of the SBN₂ curve?
Expired gas comes from the conducting airways and contains mostly oxygen with very little nitrogen
What occurs during Phase II of the SBN₂ curve?
A sharp increase in nitrogen concentration as conducting airway gas mixes with alveolar gas
What occurs during Phase III of the SBN₂ curve?
The alveolar plateau, where expired gas originates from the alveoli
What does the ΔN₂ measurement between 750 and 1250 represent?
The change in nitrogen concentration along Phase III. A greater increase indicates uneven ventilation distribution
What occurs during Phase IV of the SBN₂ curve?
Nitrogen concentration rises abruptly as the basal airways close and the apical lung regions continue emptying
How is closing volume identified on the SBN₂ graph?
The volume exhaled between the beginning of Phase IV and the end of expiration
What happens to the peripheral gravity-dependent airways in obstructive disease?
They close earlier during expiration
How does airway compression during expiration affect airway closure?
Compression promotes earlier airway closure
What is the purpose of a ventilation/perfusion (V/Q) lung scan?
To evaluate the distribution of ventilation and/or perfusion throughout the lungs
What methods are used to evaluate ventilation and perfusion?
Ventilation uses radioactive gas, while perfusion uses an injected radioactive substance
What radioactive gas is used for ventilation scanning?
Radioactive xenon (Xe)
What type of lung disease can a xenon ventilation scan help evaluate?
Obstructive lung disease
What is the initial breathing maneuver during a spontaneous-breathing xenon ventilation scan?
The patient inhales a vital capacity of xenon gas and holds their breath for 10 seconds while images are taken
Why does the patient rebreathe the xenon mixture?
To allow equilibration of xenon throughout the ventilated lung regions
What is the final step of a xenon ventilation scan?
The patient breathes room air while additional images are taken to identify trapped radioactive gas
How is a perfusion lung scan performed?
A radioactive substance is injected intravenously, and its particles lodge in the pulmonary circulation for imaging
What condition is a perfusion lung scan especially useful for evaluating?
Pulmonary embolism
What is evaluated when ventilation and perfusion scans are combined?
The distribution of ventilation and perfusion across individual lung segments
How does gravity affect normal V/Q scan images?
Gravity influences the distribution of radiotracer throughout the lungs
What are two radiation-related considerations for V/Q scanning?
The radioactive substances have short half-lives, and radiation safety is managed by the hospital's Radiation Safety Officer/physicist
How is a xenon ventilation scan performed on a mechanically ventilated patient?
Xenon is added to the ventilator circuit, and images are taken at a selected rate and ventilation setting without a VC maneuver
What additional abnormalities can ventilation scans help identify?
The severity of some pulmonary disorders and the presence of obstructive tumors
Who typically performs ventilation scanning?
A nuclear medicine technologist, with assistance from respiratory therapists
What is the volume of isoflow (VisoV)?
The amount of gas remaining in the lungs when airflow becomes independent of gas density
What gas mixture is commonly used for isoflow testing?
Heliox, usually 80% helium and 20% oxygen
How can a patient breathe heliox before the FVC maneuver?
Through normal tidal breathing for several minutes or three SVC maneuvers followed by an FVC
What two expiratory tracings are compared during isoflow testing?
An FVC maneuver performed while breathing heliox and the same maneuver performed while breathing medical air
What are the axes of an isoflow flow-volume graph?
Vertical axis: flow. Horizontal axis: volume
At what points are expiratory flow rates compared during isoflow testing?
Vmax25 and Vmax50, including flow at the 50% point of FVC for Vmax50
How is the volume of isoflow located on a flow-volume graph?
At the point where the heliox and medical-air expiratory curves converge, using the remaining lung volume
What determines airflow after the heliox and medical-air curves converge?
Small airway patency rather than gas density
What airway characteristic can affect flow during isoflow testing?
Increased airway resistance, such as resistance caused by excessive mucus
How do the heliox and air tracings differ on the example graph in your slides?
The heliox tracing shows higher flow initially, but the two curves eventually converge
A patient's SBN₂ graph has a steeper-than-normal Phase III slope. What does this suggest?
Uneven distribution of ventilation throughout the lungs
During an SBN₂ test, Phase IV begins prematurely and closing volume is increased. What might this indicate?
Small airway disease or obstruction causing the peripheral airways to close earlier during expiration
A patient stops exhaling before reaching RV during the SBN₂ test. Why could this affect the closing volume measurement?
The full volume following the onset of airway closure would not be measured
During isoflow testing, Vmax50 is decreased. What airway abnormality might this indicate?
Increased resistance in the small airways, particularly those less than 2 mm in diameter
A patient's heliox and air curves converge earlier at a higher lung volume than expected. What does this suggest?
Small airway disease, which increases the volume of isoflow
Why does the effect of gas density disappear after the flow-volume curves converge?
At lower lung volumes, airflow becomes primarily dependent on the patency of the small airways rather than gas density