1/24
Looks like no tags are added yet.
8.1
Distance:
Refers to the length an object travels along a path. The symbol d is used to represent the distance an object has travelled, and it is always measure in metres (m).
Displacement:
The length (straight line) and direction of an object from its origin. Displacement is represented by the symbol s and measured in metres. It has both magnitude and direction (vector), which makes displacement.
Vector:
A quanitity having both magnitude (large size) and direction.
Speed and the formula used to calculate it:
Speed is how fast something travels. The formula: Speed= Distance/ time (s=d/t). Common units are m/s or km/h. You can also rearrange the formula: Distance= Speed x time, Time = Distance/speed.
How do you convert between m/s and km/h:
m/s→ km/h: Multiply by 3.6
km/h→ m/s: Divide by 3.6
Two types of speed:
Average speed: Is the total distance an object travels divided by the time it takes to do so. The speed of the object may change as it moves.
Instantaneous speed: The speed something is travelling at a given point in time.
Instantaneous speed:
Instantaneous speed can be determined using a radar gun or a speed detector. A speed detector calculates the average speed but over such a small timeframe that it is essentially capturing the speed at the instant, so it is called instantaneous speed. Another example of the measurement of instantaneous speed is a speedometer in a car.
Velocity:
Is a term used to describe how fast something travels in a particular direction. Like speed, the common units used for velocity are metres per second (m/s) or kilometres per hour (km/h). However, unlike speed, veloctiy is a measure of the change in displacement of an object within a certain amount of time rather than a change in distance.
Calculating velocity:
Average velocity = Displacement (m or km) / time taken (s or h)
Vav= s / t
Acceleration:
Describes the situation when an object speeds up (accelerates) or slows down (decelerates).
Calculating Acceleration (a):
Is defined as the change in velocity divided by time.
Acceleration= change in velocity / time taken = final velocity - initial velocity / time taken
a= v2-v1 / t
8.2
Distance-time graph:
A distance- time graph, shows how far an object travels as time progresses. The steepness of the line is known as the gradient. A flat line indicates that an object is not moving. A steep line (large gradient) indicates that an object is moving faster than a less-steep line (smaller gradient). The gradien is equal to the rise divided by the run between two points on a graph. The rise is the change in distance, and the run is the change in time. The gradient on a distance- time graph = average speed.
Displacement-time graphs:
These graphs show how an objects position changed compared to where it started from. The y-axis is labelled displacement. As displacement increases, this indicates that the object is moving further away from where it started. As displacement decreases, this indicates that the object is moving closer to where it started. The gradient on a displacement- time graph = average velocity.
Velocity- time graphs:
The gradient of a velocity-time graph is the average acceleration of that object in that time. The area under a velocity-time graph is the Distance that object travelled in that time. The area can be calculated by either: Using formulas to determine area of shapes or counting the number of squares.
8.3
Force:
A force is a push or pull, and when opposed, a net-force causes an object to speed up, slow down, or change direction. This means a force could accelerate or decelerate a moving object and can cause a moving object to become stationary.
Unbalanced and balanced forces and net force:
If the multiple forces acting on an object are balanced, the forces are equal in magnitude and occruing in opposite directions. The object motion will not change, a stationary object will remain stationary, and a moving object will continue to move in the same direction at constant velocity. The term net force is used to describe the sum of all forces acting on an object. When the net force is zero (Fnet=0), the forces are balanced and will not change the motion of an object. However, if the forces applied to an object are unbalanced (Fnet does not equal 0), the object will either accelerate, decelerate or change direction.
Newtons first law of motion: the law of inertia:
An obeject in motion, will stay in motion unless acted upon by an external force.
Inertia:
The tendency for objects to either stay at rest or continue travelling at a constant speed in the same direction.
Eg: Inertia is responsible for the feeling that you get when you suddenly change motion in a car. At times when we travel at a constant speed, we hardly even recognise that we are moving. But, when the vehicle that we are travelling in suddenly stops, turns a sharp corner or accelerates, we notice that our bodies move unexpectedly, this is inertia.
Newtons second law of motion:
The acceleration of an object, depends on the mass of the object and the amount of force applied.
net force(N)= mass(kg) x acceleration (ms-2)
Fnet=ma
Mass:
Is the quantity of matter in an object and does not change regardless of the gravitational forces acting on it.
Si units: kilograms
Weight:
It is different to mass, as it is actually a ‘force due to gravity ‘ or the ‘weight force’. Measured in newtons. It is calculated by multiplying the mass of the object by the acceleration due to gravity acting on it.
Fg=mg: The Fg is the force due to gravity measured in newtons.
Newtons third law:
For every action (force), there is an equal and oposite reaction (force).
Eg: The earth pulls on the moon. The moon pulls on the earth with an equal and oposite force. Theres only one force acting on the moon, so it falls, or accelerates towards the Earth in a circular orbit.