1/47
Looks like no tags are added yet.
Structural geology
The field-based study of rock deformation from grain to outcrop scale (roughly 100microns to 1−2km), concerned with geometry, kinematics, and mechanics.
Tectonics
The study of the movement and interaction of tectonic plates, at scales of roughly 100m to 1000km.
Geodynamics
The study of the forces and processes (e.g. mantle convection) driving plate tectonics, at scales greater than 100km.
Kinematics
The description of how rock bodies have moved or been displaced, without necessarily explaining the forces involved.
Mechanics
The forces responsible for deforming rock bodies.
Microscopic scale
Observation under an optical or electron microscope; typically, sub-millimetre features.
Mesoscopic (outcrop) scale
Observation by eye on a hand specimen or single outcrop, up to roughly 1km.
Macroscopic scale
Regional-scale field observation, greater than 1km, often requiring correlation between outcrops.
Continuous / discontinuous
Whether a structure (e.g. a layer) persists without interruption, or is broken/offset, at the scale of observation.
Boudinage
A structure formed when a layer is stretched and thinned until it breaks into isolated, sausage-like segments.
Homogeneous / heterogeneous
Whether a material has uniform composition/properties throughout or varies from point to point.
Isotropic / anisotropic
Whether a material's physical properties are the same in all directions or vary with direction.
Transversely isotropic
A material (common in layered/foliated rocks) whose properties are similar within the layering but differ across it.
Fold
A curved rock structure formed when a layer is compressed parallel to its length while ductile enough to bend rather than break.
Geometric model
A description of the shape, orientation, and 2D/3D form of a structure, without reference to forces or material properties.
Kinematic model
A model describing the relative motion or displacement between parts of a structure, without reference to the forces involved.
Mechanical (dynamic) model
A quantitative model that incorporates material properties and the forces acting on them, usually developed through physical experiments.
Direct methods
Geometric, kinematic, and mechanical models — all derived directly from observation of the structure or experiments on it.
Indirect (analytical) methods
Hypothesis-driven models used to test processes that cannot be observed directly, such as mantle convection.
Shear-sense indicator
A structural feature (e.g. a rotated grain or bookshelf structure) used to determine the direction of relative movement in a shear zone.
Bookshelf structure
A set of tabular grains or blocks that rotate and slip past one another like a row of tilted books, used as a shear-sense indicator.
Sandbox experiment
A scaled physical model using layers of sand dragged over a rigid base to simulate large-scale processes such as mountain building.
Analogue experiment
A scaled laboratory experiment using materials (e.g. sand, putty, plasticine) chosen to mimic the mechanical behaviour of real rocks.
Overprinting
The partial obscuring or modification of an earlier deformation structure by a later, different phase of deformation.
Decollement
A gently dipping detachment surface along which a body of rock has slid, often forming the base of a series of thrust faults.
Thrust fault
A fracture along which one rock body has been pushed up and over another, typically in a compressional setting.
Azimuth
a compass bearing measured on the horizontal plane from 0 to 360 clockwise from north
Inclination
The angle of tilt of a plane or line measured from the horizontal, from 0∘ to 90∘.
Strike
The compass direction of the horizontal line of intersection between an inclined plane and a horizontal plane.
Dip angle
The inclination of a plane below the horizontal, measured perpendicular to the strike.
Dip direction
The compass direction towards which a plane slopes.
Apparent dip
A dip angle measured in a direction other than perpendicular to the strike; always smaller than the true dip.
Trend
The azimuth of the vertical plane containing a line, in the direction the line plunges.
Plunge
The inclination of a line below the horizontal.
Pitch (rake)
The angle between a line and a horizontal reference (usually the strike), measured within the plane containing the line.
Unconformity
A gap in the stratigraphic record representing missing time, caused by erosion or non-deposition.
Compass-clinometer
A field instrument (e.g. Brunton compass) combining a magnetic compass and an inclinometer, used to measure strike, dip, trend, and plunge.
Stereographic projection
A method for representing three-dimensional orientation data on a flat, two-dimensional diagram.
Stereonet
The circular gridded diagram used for stereographic projection in structural geology.
Primitive circle
The outer circle of a stereonet, representing the horizontal plane through the centre of the reference sphere.
Great circle
A vertical grid line on the stereonet, running from pole to pole, used to plot planes and measure dip/plunge angles.
Small circle
A horizontal grid line on the stereonet, running east–west, analogous to lines of latitude.
Equal-area (Schmidt–Lambert) net
A stereonet that preserves area, minimising distortion for statistical analysis of many measurements.
Equal-angle (Wolf) net
A stereonet that preserves angular relationships exactly, suited to kinematic and strain analysis.
Lower-hemisphere projection
The convention of projecting data from the lower half of the reference sphere, standard practice in structural geology.
Zenith
The reference pole of the sphere (here, the lowest point) used to project points onto the primitive circle.
Pole (of a plane)
The point representing the line normal (perpendicular) to a plane; plots 90∘ from the plane's own great-circle arc.
Kinematic analysis (of a slope)
Using stereographic projection of discontinuity and slope-face orientations to assess