1/61
film image quality, radiographic film, latent image formation, film speed
types of imagine equipment
film/intensifying screen
computed radiography (CR)
digital radiography (DR)
why were intensifying screens used?
to reduce patient exposure
where is intensifying screen?
in a cassette (two screens), where film gets placed
what is adhered to a sheet of polyester plastic?
active layer or emulsion
what does emulsion contain?
crystals suspended in gelatin that serve as latent imaging centers
what are latent imaging centers?
(in the emulsion) the crystals suspended in gelatin
what do intensifying screens do?
convert the exit radiation intensities into visible lightw
what does light do?
exposes the crystals in the emulsion
when are dark densities created?
when the exposed crystals are converted to black metallic silver
what causes light or clear areas on the film?
removal of unexposed crystals during chemical processing
what do light vs dark represent?
light: radiation was absorbed
dark: radiation was transmitted through
what is visibility of anatomic tissues achieved by?
proper balance of density and contrast;
photographic properties
visibility; density and contrast
geometric properties
sharpness; detail and distortion
what does radiographic film acquire?
a latent image
what is the medium for image acquisition, processing, and display?
film
what is the most important layer for creating the image?
emulsion layer
what is the emulsion layer?
the radiation and light sensitive layer of the film
what does the emulsion of film consist of?
silver halide crystals suspended in gelatin
what is silver halide?
material that is sensitive to radiation and light
what must the emulsion layer have? why?
polyester base, so the film can be handled and processed while remaining physically strong after processing
why is a dye or tint added to base layer?
to decrease eye strain when viewed on view box
what is the most widely used radiographic film?
screen film; intended to be used with one or two intensifying screensw
what is screen film more sensitive to?
light, less sensitive to x-rays
what is double emulsion film?
has an emulsion coating on both sides (can also have single); film screen imaging typically uses double emulsion film with two intensifying screens
what happens to silver halide crystals with exposure to x-rays and light?
they ionize the halide crystals;
negative charged electrons and positively charged silver ions float freely in the emulsion gelatin
what traps electrons?
sensitivity specks
what does each trapped electron do?
attract a silver ion
what does metallic silver clump around?
the sensitivity specks
what are the sites of latent image formation?
sensitivity specks (physical imperfections)
once the silver halide crystals become ionized (from light) what happens?
the freed electrons become trapped at the sensitivity specks
what attracts the freed silver ions?
the negatively charged sensitivity specks; every silver ion that combines with an electron is neutralized by that electron → therefore becoming metallic silver
what become the latent image centers?
several sensitivity specks (‘focal points’) with many silver ions attracted to them
what do the latent image centers appear as?
areas of radiographic density on the manifest image after processing
how many sensitivity specks must there be for a latent image center to appear?
at least three with at least three silver atoms (it is believed)
more exposure to film causes….
more metallic silver visualized as radiographic density
what are the two primary factors that affect film speed?
both related to silver halide crystals found in emulsion layers
number of silver halide crystals present
size of the crystals
film contrast
ability of radiographic film to provide a certain level of image contrast (density differences)
what does high contrast film accentuate?
more black and white areas
what does low contrast film show?
primarily shades of grey
what does latitude of film affect?
range of radiation exposures that can provide diagnostic densities
spectral sensitivity
color of light to which a particular film is most sensitive
categories of spectral sensitivity films
blue
green (orthochromatic)
what is important when using intensifying screens with radiographic film?
matching the spectral sensitivity of the film with the spectral emission of the screen
spectral emission
color of light produced by particular intensifying screen;
same as spectral sensitivity, blue light and green light emitting screens
spectral matching
correctly matching the color sensitivity to the film of the color emission of the intensifying screen
what happens if there is an incorrect match of film and screens based on spectral emission and sensitivity?
radiographs that display inappropriate levels of radiographic density
what is an intensifying screen?
on a radiographic cassette; contains phosphors to convert x-ray energy into light → exposing the film
what is the most important screen component? why?
phosphor layer (active layer); contains the phosphor material that absorbs the transmitted x-rays and converts them to visible light
which is the front screen?
screen mounted on the side of the cassette facing the x-ray tube
back screen
opposite side (not facing x-ray tube)
how much extra light is the film exposed to with double emulsion?
approximately twice as much because it’s exposed from both sides
how is a single used?
as a back screen on the side of the cassette that is opposite from the tube side ; emulsion side must be placed against the intensifying screen
what does visibility of anatomic details refer to
density and contrast of the image
how is accuracy achieved by?
maximizing the amount of recorded detail and minimizing the amount of distortion
how is visibility of the anatomic tissues achieved by?
proper balance of density and contrast ; anatomic details must be recorded accurately and with the greatness amount of sharpness
what is screen film more sensitive to?
light; less sensitive to x-rays
what appear as areas of radiographic density on the manifest image after processing?
latent image centers
how many sensitivity specks are needed for a latent image center to appear?
at least 3 sensitivity specks with at least 3 silver atoms each
what gets converted to metallic silver after chemical processing?
the specks that become a latent image center
what does spectral matching refer to?
correctly matching the color sensitivity of the film to the color emission of the intensifying screen ; incorrect matches result in radiographs that display inappropariate levels of radiographic density
fluorescence
ability of phosphors to emit visible light only while exposed to x-rays (with little or no afterglow)