1/39
Vocabulary practice cards reviewing essential concepts, thermodynamic cycles, codes, equipment, and physics principles across combined cycle, hydroelectric, geothermal, renewable, and nuclear power plant engineering.
Refresher-1
—
Brayton Cycle
The thermodynamic gas power cycle that governs the topping cycle in combined cycle power plants.
Drum-Type HRSG
The type of Heat Recovery Steam Generator most commonly installed in large-scale combined cycle power plants.
Dry Cooling Tower
The preferred condensing and cooling method for combined cycle power plants located in water-scarce regions.
Evaporator (HRSG)
The section of a Heat Recovery Steam Generator responsible for transferring heat to water at its saturation temperature.
Steam Moisture Content
The operating factor in a steam turbine that predominantly causes erosion of the last-stage blades.
Triple-Pressure with Reheat
The combined cycle power plant (CCPP) cycle arrangement designed to deliver the maximum power output.
Torricelli's Theorem
The fluid mechanics principle that relates fluid flow discharge through orifices directly to the velocity head.
Run-of-River Plant
A hydroelectric power plant configuration that operates without any water storage reservoir.
Pumped Storage Plant
A hydroelectric facility that pumps and stores water during off-peak hours for subsequent power generation to supply quick peak demand.
Pelton Wheel
A tangential flow impulse turbine designed for high head, low flow rate hydroelectric installations.
Impeller Tip
The outermost radial portion of an impeller which experiences the highest tangential linear speed.
Runner
The rotating blade component of a hydro turbine responsible for primary energy transformation from fluid kinetic/pressure energy into mechanical shaft power.
IEC 60193
The international standard code governing acceptance and performance testing of hydraulic turbines.
Euler's Turbine Equation
The fundamental governing relationship applying to velocity triangles to quantify torque and energy transfer in turbomachinery.
Bulb Turbine
A specialized axial-flow Kaplan-type turbine integrated within an underwater bulb casing, best suited for low-head tidal hydro applications.
Arch Dam
A curved concrete or masonry dam that transfers hydraulic loads onto canyon walls, representing the most economical dam type for narrow valleys.
Gravity Dam
A massive concrete or masonry dam structure that relies exclusively on its own self-weight to resist overturning and sliding from hydrostatic water pressure.
Binary Cycle Geothermal Plant
A geothermal generation system utilizing a secondary working fluid with a lower boiling point, highly effective for reservoirs below the boiling point of water.
Larderello (Italy)
One of the oldest commercial geothermal electricity production fields in the world.
ASME BPVC
The American Society of Mechanical Engineers Boiler and Pressure Vessel Code governing the design, construction, and certification of pressure vessels used in geothermal power facilities.
Hot Dry Rock System
An engineered geothermal system (EGS) requiring hydraulic fracturing to enhance subsurface permeability and allow artificial fluid circulation.
API RP 53
The American Petroleum Institute recommended practice standard governing safety systems and blowout prevention in geothermal drilling.
Flash Steam Plant
The geothermal plant cycle most efficient for exploitation of high-temperature, pressurized geothermal reservoirs.
Leyte Geothermal Field
The largest producing geothermal field located in the Philippines.
Betz's Limit
The theoretical maximum power coefficient and kinetic energy extraction efficiency of a wind turbine rotor, mathematically equal to 2716 or 59.3%.
Photoelectric Effect
The fundamental quantum physics principle governing electricity generation in photovoltaic (PV) solar cells.
Tidal Range
The vertical height difference between successive high and low tides, serving as the most critical factor governing potential energy in a tidal barrage system.
Inverter
A power electronics device that converts direct current (DC) generated by photovoltaic panels into alternating current (AC) compatible with the electric grid.
Darrieus Rotor
A curved-blade vertical-axis wind turbine (VAWT) rotor configuration resembling an eggbeater.
IEC 62109
The international safety standard applying directly to power conversion equipment and inverters used in grid-connected photovoltaic systems.
Uranium-235 (U-235)
The fissile isotope of uranium most commonly utilized as nuclear fuel in commercial nuclear power reactors.
Containment Structure
The heavy reinforced concrete and steel outer enclosure functioning as the final engineered safety barrier against radioactive release in nuclear power plants.
SCRAM
The rapid, emergency shutdown of an operating nuclear reactor accomplished by inserting control rods into the core.
Rankine Cycle
The thermodynamic vapor power cycle that models the steam-power generation process in commercial nuclear power facilities.
Xenon-135
A radioactive fission product gas characterized by an extremely large neutron absorption cross section, requiring close monitoring during reactor operation.
Liquid Sodium
The liquid metal coolant characterized by high thermal conductivity used in fast breeder nuclear reactors.
Positive Void Coefficient
The reactor reactivity feedback condition wherein the formation of voids or steam bubbles in the coolant causes a rapid increase in nuclear core power.
Plutonium-239 (Pu-239)
The main fissile isotope product synthesized and consumed in plutonium-based nuclear reactor fuel.
Sintering
The high-temperature thermal process in nuclear fuel fabrication that compacts and bonds uranium dioxide (UO2) powder into solid ceramic fuel pellets.