1/274
Looks like no tags are added yet.
Impermeability through a Dense Concrete
Accurate grading and proportioning of the concrete materials in order to secure a concrete so dense as to be waterproof.
Waterproofing Coatings and Washes
Applying waterproof coatings or washes to the concrete after it is on place.
Integral Waterproofing Compounds
Mixing foreign substances with the concrete.
Membrane Waterproofing
Surrounding the concrete with layers of waterproofing materials.
Sylvester process
Alum and soap mixtures applied in alternate mixtures
Alum and soap mixtures applied in alternate mixtures
which penetrates the pores of the concrete forming insoluble compounds due to chemical action between the alum and soap solutions, and these compounds prevents percolation.
Asphalt emulsions
minute asphalt particles dispersed in water and maintained in suspension (until applied) by a mineral colloid emulsifying agent
Cutback Asphalts
composed of a variety of products from thin liquids to heavy paste, often one or more asphalts dissolved in solvent are filled with minerals and fibers to meet requirements of different coating uses and provide tough, durable films resistant to the passage of water vapor.
Integral Waterproofing Compounds
These are manufactured and sold under various trade names, and are available in powder or liquid form
Membrane Waterproofing
Layers of waterproofing materials used in this method range from ordinary tar paper laid with coal-tar pitch to asbestos or asphalted felt laid in asphalt
Galvanized Iron Roofing
various corrugations and rib sections for types of rooking
Aluminum Roofing
various corrugation and rib sections for types of rooking
Plastic
various corrugation and rib sections for types of rooking
Polycarbonate
corrugated and flat sheets for types of rooking
5 to 12 ft. in 1 ft
Corrugated galvanized iron sheets are manufactured in lengths of _______________
Aluminum Roofing
Corrugated aluminum is rigidized sheet fabricated of special aluminum alloys specifically developed for this purpose.
Metal Sheet Roofing.
Corrugated sheets are manufactured in in same widths and lengths as ________________
Corrugated or Ribbed Roofing
This plastic roofing is Ideally used in sites of high salinity levels.
Sheet Roofing
This plastic roofing is Ideally used in greenhouses, patios, outdoor sheds, and skylights.
Bituminuous Cement
is a black substance available in solid, semi-solid, or liquid states at normal temperatures
GLASS
hard, brittle, chemically inert substance produced by fusing silica together with a flux and a stabilizer into a mass that cools to a rigid condition without crystallization.
Foamed or cellular glass
This glass is used as rigid, vapor proof thermal insulation.
Glass fibers
This glass are used in textiles and for material reinforcement. In spun form, glass fibers form glass wool, which is used for acoustical and thermal insulation
Glass block
used to control light transmission, glare, and solar radiation.
Sheet glass
is fabricated by drawing the molten glass from a furnace (drawn glass), or by forming a cylinder, dividing it lengthwise, and flattening it (cylinder glass).
Plate glass
formed by rolling molten glass into a plate that is subsequently ground and polished after cooling. Plate glass provides virtually clear, undistorted vision.
Float glass
is manufactured by pouring molten glass onto a surface of molten tin and allowing it to cool slowly. The resulting flat, parallel surfaces minimize distortion and eliminate the need for grinding and polishing. Float glass is the successor to plate glass and accounts for the majority of flat-glass production.
Annealed glass
cooled slowly to relieve internal stresses.
Heat strengthened glass
is annealed glass that is partially tempered by a process of reheating and sudden cooling. Has about twice the strength of annealed glass of the same thickness.
Tempered glass
annealed glass that is reheated to just below the softening point and then rapidly cooled to induce compressive stresses in the surfaces and edges of the glass and tensile stresses in the interior.
Laminated or safety glass
consists of two or more plies of flat glass bonded under heat and pressure to interlayers of polyvinyl butyral resin that retains the fragments if the glass is broken. Security glass is laminated glass that has exceptional tensile and impact strength.
Wired glass
is flat or patterned glass having a square or diamond wire mesh embedded within it to prevent shattering in the event of breakage or excessive heat. Considered a safety glazing material and may be used to glaze fire doors and windows.
Patterned glass
has a linear or geometric surface pattern formed in the rolling process to obscure vision or to diffuse light.
Obscure glass
has one or both sides acid-etched or sandblasted to obscure vision. Either process weakens the glass and makes it difficult to clean.
Spandrel glass
is an opaque glass for concealing the structural elements in curtain wall construction, produced by fusing a ceramic frit to the interior surface of tempered or heat-strengthened glass.
Insulating glass
s a glass unit consisting of two or more sheets of glass separated by a hermetically sealed air space to provide thermal insulation and restrict condensation;
Insulating glass
glass edge units have a 3/16” (5) air space; metal edge units have a ¼” or ½” (6 or 13) air space.
Tinted or heatabsorbing glass
has a chemical admixture to absorb a portion of the radiant heat and visible light that strike it.
Iron oxide
gives the glass a pale blue-green tint
cobalt oxide and nickel
impart a grayish tint
selenium
infuses a bronze tint
Reflective glass
has a thin, translucent metallic coating to reflect a portion of the light and radiant heat that strike it.
Lowemissivity (low e) glass
transmits visible light while selectively reflecting the longer wavelengths of radiant heat, produced by depositing a low-e coating either on the glass itself or over a transparent plastic film suspended in the sealed air space of insulating glass.
NAILS
are straight, slender pieces of metal having one end pointed and the other enlarged and flattened for hammering into wood or other building materials as a fastener.
Tempered, high-carbon steel nails
These nails are used for greater strength in masonry applications.
penny (d).
Nail lengths are designated by the term___________
1” (25), 6” (150
Nails range in length from 2d, about ______ long, to 60d about _________ long
3x
Nail length should be about ________ thickness of the material being secured
Large, lighter,
_____ diameter nails are used for heavy work while ____________ nails are used for finish work; ______ nails are used for hardwood rather than for softwood.
Double-headed nails
These nails are used for easy removal in temporary construction and concrete formwork
Flat heads
these nails provide the largest amount of contact area and are used when exposure of the heads is acceptable.
Pneumatic nailers and staplers
driven by a compressor, are capable of fastening materials to wood, steel or concrete.
Powder-driven fasteners
use gunpowder charges to drive a variety of studs into concrete or steel.
Screws
are metal fasteners having tapered, helically threaded shanks and slotted heads, designed to be driven into wood or the like by turning, as with a screwdriver.
1/8” (3), ½ to 2/3
The length of a wood screw should be about _____ less than the combined thickness of the boards being joined, with _______ of the screw’s length penetrating the base material
Fine threaded screws
these screws are generally used for hardwoods
coarse-threaded
These screws are used for softwoods
Bolts
Are threaded metal pins or rods, usually having a head at one end, designed to be inserted through holes in assembled parts and secured by a mating nut.
Carriage bolts
are used where the head may be inaccessible to the placement of a nut or where an exceptionally long bolt would be needed to penetrate a joint fully.
Washers
are perforated disks of metal, rubber or plastic used under the head of a nut or bolt or at a joint to distribute pressure, prevent leakage, relieve friction or insulate incompatible materials
Lock washers
are specially constructed to prevent a nut from shaking loose
Load-indicating washers
have small projections that are progressively flattened as a bolt is tightened, the gap between the head or nut and the washer indicating the tension in the bolt.
Expansion bolts
are anchor bolts having a split casing that expands mechanically to engage the sides of a hole drilled in masonry or concrete.
Molly
is a trademark for a brand of expansion bolt having a split, sleevelike sheath threaded so that turning the bolt draws the ends of the sheath together and spreads the sides to engage a hole drilled in masonry or the inner surface of a hollow wall
Expansions shields
are lead or plastic sleeves inserted into a predrilled hole and expanded by driving a bolt or screw into it.
Toggle bolts
are used to fasten materials to plaster, gypsum board and other thin wall materials. They have two hinged wings that close against a spring when passing through a predrilled hole and open as they emerge to engage the inner surface of a hollow wall.
Rivets
are metal pins that are used for permanently joining two or more structural steel members by passing a headed shank through a hole in each piece and hammering down the plain end to form a second head. Their use has been largely superseded by the less labor-intensive techniques of bolting or welding.
Explosive rivets,
used when a joint is accessible from one side only, have an explosive-filled shank that is detonated by striking the head with a hammer to expand the shank on the far side of the hole.
Adhesives
are usedd to secure the surfaces of two materials together
Animal or fish glues
are primarily for indoor use where temperature and humidity do not vary greatly; they may be weakened by exposure to heat or moisture.
White or polyvinyl glue
sets quickly, does not stain and is slightly resilient.
Epoxy resins
are extremely strong, waterproof and may be used to secure both porous and nonporous materials; they may dissolve some plastics.
Resorcin resins
These adhesives are strong, waterproof and durable for outdoor use, but they are flammable and their dark color may show through paint.
Contact cement
These adhesives forms a bond on contact and therefore do not require clamping. It is generally used to secure large sheet materials such as plastic laminate.
HARDWARE
Metal products used in construction
ROUGH HARDWARE
–Hardware meant to be concealed, such as bolts, nails, screws, spikes, and other metal fittings.
FINISH HARDWARE
also called Architectural Hardware, Builders’ Finish Hardware, Finish Builders’ Hardware . Hardware, such as hinges, locks, catches, etc., that has a finished appearance as well as a function esp. that used with doors, window, and cabinets; may be considered part of the decorative treatment of a room or building.
Common Wire Nail or Common Nail
a cut or wire low-carbon steel nail, having a slender plain shank and a medium diamond point; used in work where finish is unimportant, as in framing.
Finishing Nail
a slender nail made from finer wire than the common nail; has a brad-type head which permits it to be set below the surface of the wood, leaving only a small hole which can be puttied easily; used in finishing work.
Brad Nail
a small finishing nail, usually of the same thickness throughout, with a head that is almost flush with the sides or a head that projects slightly to one side.
Box Nail
similar to a common nail but thinner; has a long shank which may be smooth or barbed.
Casing Nail
a slender nail with a small, slightly flared head used for finishing work.
Ring-shank Nail
a nail having a number of ring-like grooves around the shank to increase its holding power.
Clinch or Clench Nail
any nail designed for clinching, after driving. Clinching is securing a nail, staple, screw or bolt, by hammering the protruding point so that it is bent over.
Roofing Nail
a short nail having a barbed or ring shank and a comparatively large flat head; may be galvanized or bright
] Brigh
a metal finish using a dip to give a bright surface to brasses; often a mixture of sulfuric acid, nitric acid, hydrochloric acid, and water.
Metal Lath Nail
nail designed for securing a metal lath.
(a) by slitting metal and then stretching it to form a diamondshaped mesh or (b) by punching and forming sheet metal
Electrician’s Staple Nail
– a u-shaped piece of metal or heavy wire, with pointed ends, driven into a surface to secure a sheet material, hold a hasp, etc.
Concrete nail
a hardened steel nail having a flat countersunk head and a diamond point; used for nailing to concrete or masonry.
Masonry nail
– a hardened steel nail with a knurled or fluted shank; esp. used for fastening to masonry.
Face-nailing
nailing in which the nails are driven perpendicular to the face of the material.
Blind-nailing
also called secret nailing concealed or . Nailing in such a way that the nail heads are not visible on the face of the work. In finished roofing, the use of nails that are not exposed to the weather.
Toe-nailing
also called nailing skew or tusk . Nailing obliquely to the surfaces being joined.
Wood screw
a helically threaded metal fastener having a pointed end; forms its own mating thread when driven into wood or other resilient material.
Metal screw
fastened by screwing into metal.
Lag screw, lag bolt, coach screw
a bolt having a square head and a thin, coarsepitched thread.
Screw anchors
an anchor (similar to an expansion bolt) having a metal shell with a screw along its central axis; when the shell is placed in a hole and the screw is driven in, the shell expands, tightly securing the anchor in the hole.
Screw anchors
Locally called a tux screw with a plastic shell.