(finished) NEW WQ - Equations

0.0(0)
Studied by 1 person
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/20

flashcard set

Earn XP

Description and Tags

21 Terms

1
New cards

pH Hydronium concentration

pH = - log[H3O] OR pH = - log[H] (H3O is hydronium, and both H3O and H must be in molarity.)
To find H3O or H from pH : molarity of H3O = 10^-pH
E.g., if pH is 8, then your equation will be 10^-8 (pay attention to the negative sign!)

2
New cards

Turbidity

Turbidity=(2.3xA)/L
A = absorbance, as measured by a spectrophotometer etc.
L = optical path length, in cm (Unit is in cm^-1.)

If too turbid (>40NTU), and was diluted :
Turbidity = (Td x (Vw+Vo))/Vo
Where
Td = turbidity of diluted sample in NTU
Vw = mL of diluted sample
Vo = mL of original sample

3
New cards

DO

After winklter titrating :
D.O. in mg/L = (vxNx8x1000)/V
Where:
V = Volume of sample taken (ml)
v = Volume of used titrant (ml)
N = Normality of titrant (equal to molarity; for a 200mL sample, it’s=0.025).

4
New cards

BOD

If the sample was unseeded (aka no extra bacteria added) : BOD in mg/L = (DO1 - DO2)xP
Where
DO1 = mg/L of DO at start of 5-day period
DO2 = mg/L of DO at end of 5-day period
P = dilution factor = Total volume (sample + water)/volume of sample
If the sample was seeded (aka extra bacteria added) : BOD in mg/L = ((DO1 – DO2) – (B1 – B2)x f)/P
Where
B1 = DO of bacterial seed control at start of 5-day period (in mg/L)
B2 = DO of bacterial seed control at end of 5-day period (in mg/L)
f = % bacterial seed in the sample /% in the control
P = dilution factor = Total volume (sample + water)/volume of sample

5
New cards

Salinity

After EC meter-ing: Salinity (ppt) = EC (in uS/cm per L)x0.00064
Generally: Salinity = Grams of salt/kilograms of total solution

6
New cards

Temp Conversions

Conversion of C to F : F = (Cx9/5) +32
Conversion of F to C: C= (F-32)x5/9

7
New cards

Fecal coliform

FC per 100mL = (# of colonies counted/volume of sample filtered) x100

8
New cards

Total solids

((Wfinal - Winitial)x10^6)/Vsample
Where
Wfinal = Dish w/dried residue
Winitial = Clean dish
Vsample = sample volume (Liters)

9
New cards

Hardness

Hardness = (2.497x[Ca]) + (4.118 x[Mg])
Ca and Mg must be in molarity.

10
New cards

Phosphates

y = 0.0522x + 0.028
where:
Y = absorbance
X = phosphate concentration.

11
New cards

Henderson–hasselbalch equation

pH=pKa+log([A-]/[HA])
Where:
pKa = The -log of Ka, the acid ionization constant for acid.
For pKa, low value=more acidic.

For carbonate systems,
pKa1 (the one w/ H2CO3)=6.3;
pKa2 (the one w/ CO^2-/3) =10.3.
A- = The molar concentration of the base H
A = The molar concentration of the acid

12
New cards

Ocean salinity

Salinity (in ‰) = 1.80655 × Chlorinity (in ‰)

13
New cards

Equation for exponential population growth

G=rN
G = population growth per unit time
r = per capita rate of increase (number of births in X time period divided by the total pop. size then)
N = the number of individuals.

14
New cards

Retention time for septic tank

Retention Time (days) = Effective Volume (gallons)/Flow Rate (gallons per day)
Effective volume is the amount of available non-waste water (that isn't sludge or scum.)

15
New cards

How do you calculate percent error?

knowt flashcard image
16
New cards

How do you calculate percent yield?

knowt flashcard image
17
New cards

How to get ppt from ppm

Divide the ppm by 1,000

18
New cards

Ion product constant of water

(H+)(OH-)=Kw, where

Kw=10^-14

19
New cards

pH vs pOH concentrations relationship

pH + pOH=14

20
New cards

Hardness

Hardness = 2.497x[Ca2+] + 4.118x[Mg2+]

21
New cards

Hilsenhoff biotic index

net (ai x ni)/N, where:

ai= tolerance value of taxon

ni=number of species in taxon

N=total number of specimens