DT - Materials. Making, Energy. Textiles

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/48

encourage image

There's no tags or description

Looks like no tags are added yet.

49 Terms

1
New cards

What are the good and bad things about using robots in factories (automation)?

Good: Faster, more accurate, cheaper than paying staff, and safe for dangerous jobs. Bad: Robots are expensive to buy, reduce human jobs, and cannot make human judgements.

2
New cards

What is a Flexible Manufacturing System (FMS)?

Factory machines controlled by computers that can quickly be reprogrammed to make different products or different amounts.

3
New cards

What is Lean Manufacturing?

A way of making products that cuts out as much waste, time, and extra materials as possible.

4
New cards

What is Just-in-Time (JIT) manufacturing?

Ordering materials so they arrive at the factory right when they are needed, saving storage space and money (but requires reliable deliveries).

5
New cards

What is CAD (Computer-Aided Design)?

Using computer software to draw, model, and design a product before making it.

6
New cards

What is CAM (Computer-Aided Manufacturing)?

Using computer-controlled machines (like laser cutters or 3D printers) to make a product.

7
New cards

What does 'sustainable' mean in D&T?

Making a product without running out of finite resources or causing permanent damage to the environment.

8
New cards

What is a Carbon Footprint?

The total amount of greenhouse gases (like CO2) released when making, using, and throwing away a product.

9
New cards

What is a Social Footprint?

How making a product affects people (such as workers' pay, safety, and working conditions).

10
New cards

What is Design for Disassembly?

Designing a product so it can easily be taken apart at the end of its life to recycle or reuse the parts.

11
New cards

What is Design for Maintenance?

Designing a product with durable parts that can easily be repaired or replaced instead of throwing the whole thing away.

12
New cards

What is Planned Obsolescence?

Deliberately designing a product to break or go out of fashion quickly so customers have to buy a new one.

13
New cards

What are the 4 stages of a Life Cycle Assessment (LCA)?

  1. Getting the raw materials. 2. Manufacturing the product. 3. Using the product. 4. Disposing of or recycling the product.
14
New cards

What are the 6 Rs of sustainability?

Repair, Reuse, Recycle, Rethink, Reduce, Refuse.

15
New cards

What are the pros and cons of Fossil Fuels (coal, oil, gas)?

Pros: Reliable energy and cheap to run. Cons: Will run out (finite) and causes air pollution/global warming.

16
New cards

What are the pros and cons of Nuclear Power?

Pros: Reliable, cheap to run, and releases very little greenhouse gas. Cons: Expensive to build, creates dangerous radioactive waste, and risks disasters.

17
New cards

What are the pros and cons of Renewable Energy (wind, solar, tidal, hydro)?

Pros: Won't run out, very low pollution, cheap to run. Cons: Expensive to set up and unreliable when weather changes.

18
New cards

How does Pumped Storage generate electricity?

Spare electricity pumps water up to a high reservoir; when extra power is needed, the water flows back down through turbines.

19
New cards

How do disposable (alkaline) batteries compare to rechargeable batteries?

Disposable: Last a long time per charge and are recyclable, but can only be used once. Rechargeable: More expensive to buy at first, but can be reused hundreds of times.

20
New cards

What is Crowdfunding?

Raising money for a new product idea by getting lots of ordinary people to donate small amounts online.

21
New cards

What is Virtual Marketing and Retail?

Advertising and selling products over the internet (using websites, social media, and influencers) instead of physical shops.

22
New cards

What is a Co-operative business?

A business owned and run by its workers or customers, where everyone gets a say and shares the profits equally.

23
New cards

What is the difference between Strength, Hardness, and Toughness?

Strength: Withstands heavy forces without breaking. Hardness: Resists scratching and dents. Toughness: Absorbs sudden impacts without snapping.

24
New cards

What is the difference between Malleability, Ductility, and Elasticity?

Malleability: Can be hammered or bent into shape without cracking. Ductility: Can be stretched into a thin wire. Elasticity: Stretches or bends and springs back to its original shape.

25
New cards

What is an alloy?

A mixture of two or more metals (or a metal and another element) combined to give better properties, like making it stronger or rust-proof.

26
New cards

What is the difference between Ferrous and Non-ferrous metals?

Ferrous: Contain iron, are magnetic, and rust (e.g., mild steel, cast iron). Non-ferrous: Contain no iron, don't rust, and aren't magnetic (e.g., aluminium, copper).

27
New cards

What is the difference between Thermoforming and Thermosetting plastics?

Thermoforming: Can be reheated and reshaped many times, so they are easy to recycle (e.g., acrylic, PVC). Thermosetting: Set permanently when heated once and cannot be reshaped or recycled (e.g., epoxy resin).

28
New cards

What is the difference between Softwoods, Hardwoods, and Manufactured Boards?

Softwoods: Fast-growing evergreen trees; cheaper and easier to work with (e.g., pine). Hardwoods: Slow-growing broad-leaved trees; denser, stronger, and more expensive (e.g., oak). Manufactured Boards: Wood chips, fibres, or layers glued into large flat sheets (e.g., MDF, plywood).

29
New cards

What is the difference between Natural and Synthetic fibres?

Natural: Come from plants or animals, biodegradable, and absorbent (e.g., cotton, wool). Synthetic: Man-made from oil, non-biodegradable, and very durable (e.g., polyester, nylon).

30
New cards

What is the difference between Blended and Mixed fabrics?

Blended: Two different fibres twisted together into a single yarn before weaving. Mixed: Two different types of yarn woven or knitted together into one fabric.

31
New cards

What are Smart Materials? Give 2 examples.

Materials that change their properties in response to their environment (like heat or light). Examples: Thermochromic pigments (change colour with heat) and Shape Memory Alloys.

32
New cards

What are Composite Materials? Give 2 examples.

Two or more different materials combined together to make a much stronger material. Examples: Carbon fibre (CRP) and fibreglass (GRP).

33
New cards

What are the 3 types of Levers?

Class 1: Pivot is in the middle (e.g., scissors). Class 2: Load is in the middle (e.g., wheelbarrow). Class 3: Effort is in the middle (e.g., tweezers).

34
New cards

How do you calculate Gear Ratio and Output Speed?

Gear Ratio = Teeth on driven gear divided by teeth on driver gear. Output Speed = Input speed divided by Gear Ratio.

35
New cards

What are the 3 types of Cams?

Circular cam (smooth up-and-down motion), Pear cam (pauses then rises/falls), and Snail cam (rises slowly then drops suddenly).

36
New cards

What are the 4 Scales of Production?

One-off: Single custom item made by skilled workers. Batch: Set number of identical items made at once. Mass: Thousands made on an assembly line. Continuous: Running 24/7 with machines making massive amounts.

37
New cards

What are the 5 types of forces?

Tension (pulling), Compression (squashing), Shear (sliding/cutting), Torsion (twisting), and Bending (curving).

38
New cards

How do Lamination, Interfacing, and Webbing make materials stronger?

Lamination: Gluing thin layers together for strength. Interfacing: Ironing/sewing stiff fabric inside clothes to hold their shape. Webbing: Strong woven fabric straps used in seatbelts and bags.

39
New cards

What are Quality Control (QC), Tolerance, and Go/No-Go gauges?

QC: Checking products during manufacturing to make sure there are no faults. Tolerance: The tiny acceptable margin of error in a measurement. Go/No-Go gauge: A quick tool used to check if a part is within tolerance.

40
New cards

What are Production Aids (Datum, Template, Jig)?

Datum: The starting edge or point (0,0) all measurements are taken from. Template: A shape you draw around to repeat a pattern. Jig: A guide that holds tools or parts in the exact right spot while drilling or cutting.

41
New cards

What are common finishes for paper and card?

Laminating (sealing in plastic), Embossing (stamping a raised 3D design), Foil blocking (pressing shiny metal foil onto card), and UV Varnishing (glossy coating dried instantly with UV light).

42
New cards

What are the main commercial printing methods?

Offset Lithography (high-volume magazines/boxes), Flexography (packaging/plastic bags), Screen Printing (t-shirts/posters), Gravure (high-quality expensive prints), and Digital Printing (quick small batches).

43
New cards

How do Seasoning, Annealing, and UV Stabilisers improve materials?

Seasoning: Drying out wet timber so it doesn't warp or rot. Annealing: Heating and cooling metal to make it softer and easier to bend. UV Stabilisers: Chemicals added to plastic so sunlight doesn't make it brittle.

44
New cards

What are Knock-Down (KD) Fittings? Give examples.

Plastic or metal fittings used to join flat-pack furniture together using basic tools (e.g., cam locks, modesty blocks, dowels).

45
New cards

How do Vacuum Forming, Blow Moulding, and Injection Moulding shape plastic?

Vacuum Forming: Heating a plastic sheet and sucking it over a mould. Blow Moulding: Blowing air into hot plastic inside a mould to make hollow bottles. Injection Moulding: Injecting melted plastic under high pressure into a mould for mass production.

46
New cards

What is the difference between Soldering, Brazing, and Welding?

Soldering: Low-heat joining for electronics using solder wire. Brazing: Higher-heat metal joining using brass rod. Welding: Melting the actual metal or plastic pieces together for a super-strong permanent join.

47
New cards

How do you protect Timber and Metals from damage or rust?

Timber: Paint, clear varnish, or tanalising (preservative for outdoor wood). Metals: Dip coating (plastic coating), powder coating (baked-on paint), or galvanising (coating steel in zinc to stop rust).

48
New cards

What are common fabric finishes in Textiles?

Flame retardant (stops fabric catching fire easily), Stain protection (like Teflon coating to repel spills), and Water-resistant (stops rain soaking through).

49
New cards

What is the difference between Pinning, Tacking, Darts, and Pleats?

Pinning: Holding fabric together temporarily with pins. Tacking: Temporary loose hand-stitches removed later. Darts & Pleats: Stitched folds in fabric used to shape garments around the body.