1/49
Looks like no tags are added yet.
Measures
1" = 25.40 milimeters
1 sq. M(m^2) = 10.764 sq. ft or = 1.196 sq. yd.
1 kg = 2.2046 lbs
Geometric Formula:
Circle
Circumference =2r*pi
Area = pi*r^2
Geometric Formula:
Triangle
Area: B*1/2H
Masterformat 2004:
00
Procurement and Contracting Requirements
Masterformat 2004:
01
General Requirements
Masterformat 2004:
02
Existing Conditions
Masterformat 2004:
03
Concrete
Masterformat 2004:
04
Masonry
Masterformat 2004:
05
Metals
Masterformat 2004:
06
Wood, Plastics, and Composites
Masterformat 2004:
07
Thermal and Moisture Composites
Masterformat 2004:
08
Openings
Masterformat 2004:
09
Finishes
Masterformat 2004:
10
Specialties
Masterformat 2004:
11
Equipment
Masterformat 2004:
12
Furnishings
Masterformat 2004:
13
Special Construction
Masterformat 2004:
14
Conveying System
Masterformat 2004:
21
Fire Supression
Masterformat 2004:
22
Plumbing
Masterformat 2004:
23
HVAC
Masterformat 2004:
25
Integrated Automation
Masterformat 2004:
26
Electrical
Masterformat 2004:
27
Communications
Masterformat 2004:
28
Electronic Safety and Security
Masterformat 2004:
31
Earthwork
Masterformat 2004:
32
Exterior improvements
Masterformat 2004:
33
Utilities
Column
A long, relatively slender, supporting pillar. A column is usually loaded axially in compression
Beam
A structural member that primarily resists loads applied laterally to the axis
Joist
Parallel beams of lumber, concrete, or steel used to support floor and ceiling systems.
Girder
A large principal beam of steel, reinforced concrete, wood, or a combination of these, used to support other structural members at isolated points along its length
Load-bearing wall
A wall specifically designed and built to support and imposed load in addition to its own weight.
Anchor Bolt
A threaded bolt, usually embeded in a foundation, for sealing a sill, framework, or machinery
Envelop
The elements of a building that enclose conditioned areas and through which thermal energy may be transfered to or from the outside environment
Wythe
Each continuous vertical section of a wall one masonry unit in thickness
Tilt-up
a method of concrete construction in which members are cast horizontally at a location adjacent to their final position and are tilted into place after forms are removed
Metal Framing
Partitions commonly used for fire-rated construction around columns and beams
Dampproofing
an application of water-resisting treatment or material to the surface of a concrete or masonry wall to prevent passage or absorption of water or moisture. can also use a concrete admixture to achieve this.
Air Barrier
A component of the envelop system that prohibits air leakage into a building and reduces the risk of condensation build up. House wrap and fluid applied barriers are examples.
Sheathing
Plywood, waterboard, OSB, or lumber used to close up side walls, floors, or roofs before the installation of finish materials on surface
Flashing
A thin, impervious sheet of material places in construction to prevent water penetration or to direct the flow of water.
Vapor Barrier
Material used to prevent the passage of vapor misture into a structure or another material, thus prevented condensation within them.
Bond Breaker
A material used to prevent adhesion between freshly poured concrete and the substrate
Storefront sash
An assembly of light metal members that form a frame for a fixed-glass storefront
Curtain Wall
the exterior closure or skin of a building.
A _____ is non-bearing and is non-supported by beams or girders
Veneer
A wall with a facing that is attached to, but not bonded to the wall
Lintel
A horizontal supporting member, installed above an opening such as a window or a door that serves to carry the weight of the wall above it.
Volume of Concrete
27 CF = 1 CY
10 CY in one Truck Load
Rebar Overlap
Diameter x 40
Example:
#5 Bar- (5/8) x 40 = 25