1/50
Comprehensive vocabulary flashcards covering Total Quality Management, Statistical Process Control, and Lean Operations for MAR 3203 Exam 3.
User-based view of quality
A quality perspective that defines quality through customer preference, characterized by better performance and more features.
Manufacturing-based view of quality
A quality perspective defined as conformance to standards and making the product right the first time.
Product-based view of quality
A quality perspective that defines quality by specific, measurable attributes of the product.
Malcolm Baldrige National Quality Award
An award established in 1988 by the U.S. government to promote TQM practices, judged across seven categories with Results representing the largest category (450 points out of 1000 total).
ISO 9000
An internationally recognized quality standard with over 1 million certifications across 206 countries that establishes management procedures, documentation, and work instructions; its 2015 revision emphasizes risk-based thinking.
Prevention costs
Costs incurred to reduce the potential for defects, such as quality assurance system creation and maintenance, or designing and buying inspection equipment.
Appraisal costs
Costs associated with evaluating products, parts, and services, such as quality audits and calibrating and maintaining inspection equipment.
Internal failure costs
Costs resulting from the production of defective parts or services discovered before delivery to the customer (e.g., scrap and re-inspection of reworked items).
External failure costs
Costs that occur when defective products or services are discovered after delivery to the customer (e.g., warranty claims and handling customer complaints).
Takumi
A Japanese character that symbolizes a broader dimension than quality, a deeper process than education, and a more perfect method than persistence.
W. Edwards Deming
Quality pioneer who authored the 14 Points for management and maintained that management must accept responsibility for building good systems because workers cannot beat what the process is capable of.
Joseph M. Juran
Quality pioneer who taught Japanese manufacturers, advocated for top-management commitment and teamwork, and defined quality as "fitness for use" rather than merely written specifications.
Armand Feigenbaum
Author of the 1961 book Total Quality Control detailing 40 steps, who framed quality as a total field rather than a mere set of tools and promoted cross-functional teamwork.
Philip B. Crosby
Author of the 1979 book Quality Is Free who asserted that the cost of poor quality is understated and coined the term "zero defects."
Walter Shewhart
Pioneer of statistical process control who created the PDCA (Plan-Do-Check-Act) continuous improvement cycle.
Kaizen
The Japanese word for ongoing, unending continuous improvement involving every employee from top leadership to the assembly line.
Six Sigma
Statistically, a process capability level of 99.9997% corresponding to 3.4 defects per million opportunities (DPMO); operationally, a comprehensive defect-reduction program developed by Motorola that utilizes DMAIC methodology.
DMAIC
The five-phase continuous improvement cycle used in Six Sigma: Define the purpose, Measure, Analyze the data, Improve processes, and Control the new process.
Quality circle
A group of employees who meet regularly to solve work-related problems, trained in planning, problem solving, and statistical methods.
Benchmarking
Selecting a demonstrated standard of products, services, or activities that represents the very best performance as a target for comparison and improvement.
Quality robustness
A concept developed by Genichi Taguchi where products are designed and manufactured to perform uniformly and consistently despite adverse manufacturing and environmental conditions.
Quality loss function (QLF)
A Taguchi concept showing that costs rise continuously as a product deviates from the target value, encompassing customer dissatisfaction, warranty costs, internal scrap, and cost to society.
Check sheet
A simple TQM tool used to generate ideas and tally data such that patterns can often be observed in real time as data is collected.
Scatter diagram
A visual tool for generating ideas by plotting two variables against each other; a tight band signifies a strong correlation, while a random pattern signifies no relationship.
Cause-and-effect diagram (Fishbone / Ishikawa)
A schematic idea-generation tool that traces potential causes of an operational problem, traditionally structured around the 4 Ms: materials, methods, manpower, and machinery.
Pareto chart
A graphical data-organization tool using bars arranged from largest to smallest alongside a cumulative percentage line to identify the "vital few" causes according to the 80/20 rule.
Flowchart
A graphic tool used to organize data by visually mapping out the step-by-step sequence of operations or decision points in a process.
Histogram
A tool used to identify problems by showing the frequency distribution of continuous data to quickly evaluate mean, mode, spread, and skewness.
Statistical Process Control (SPC) chart
The most scientific TQM problem-identification tool, used to monitor a process over time to detect when points fall outside control limits and warrant investigation for assignable causes.
Source inspection (source control)
A quality control approach where each supplier, process, and employee treats the next operational step as an internal customer, verifying quality at the point of origin.
Poka-yoke
The Japanese term for "mistake-proofing"; foolproof physical devices or techniques that prevent mistakes or ensure only acceptable products can proceed.
Attributes vs. Variables
Attributes evaluate quality categorically (e.g., good/bad, pass/fail) without indicating the degree of failure; variables measure continuous quantitative dimensions (e.g., weight, speed, length) against a tolerance range.
LEARN routine
Marriott's five-step service recovery procedure: Listen, Empathize, Apologize, React, and Notify (so systemic causes are resolved).
Natural variation (common causes)
Inherent, random process variability that affects virtually every process, is expected, and produces an output following a stable, predictable distribution.
Assignable variation (special causes)
Process variation that can be traced to a specific source—commonly classified under the 5 Ms: materials, methods, manpower, machinery, and mother nature—that destabilizes process distributions.
Central limit theorem
The statistical principle stating that the distribution of sample means will tend toward a normal distribution regardless of the underlying population shape, with mean μ and standard deviation σxˉ=nσ.
xˉ-chart
A quality control chart used to track and detect shifts or trends in the central tendency (average) of a variable process over time.
R-chart
A quality control chart that monitors gains or losses in process dispersion by tracking sample ranges (maximum−minimum) over time.
Process capability ratio (Cp)
A capability metric calculated as Cp=6σUSL−LSL; it indicates whether process spread meets specification limits (Cp≥1.0), but ignores whether the process is centered.
Process capability index (Cpk)
A capability metric determined by the smaller of 3σUSL−μ and 3σμ−LSL; it measures how well process variation fits within specifications while accounting for process centering.
Acceptance sampling
A lot-screening technique where a random sample from a batch of incoming materials or finished goods is tested to accept or reject the entire lot; it filters goods but does not drive quality improvement.
Taiichi Ohno's Seven Wastes
Seven major categories of non-value-adding operational waste abbreviated as O-Q-T-I-M-O-D: Overproduction, Queues, Transportation, Inventory, Motion, Overprocessing, and Defective product.
The 5Ss
A Lean workplace housekeeping framework consisting of Sort/segregate, Simplify/straighten, Shine/sweep, Standardize, and Sustain/self-discipline (often augmented in the U.S. with Safety and Support/maintenance).
Throughput
The pace or rate at which production units move through an operational process from start to finish.
Manufacturing cycle time
The total elapsed duration from the time raw materials arrive at a facility until the finished order is shipped to the customer.
Pull system
A Lean production system where items are produced and moved only when triggered by actual customer demand, lowering inventory and uncovering operational issues.
Push system
A traditional production approach driven by demand forecasts where batches of inventory are pushed down the supply chain and stored on shelves awaiting customer orders.
Just-in-Time (JIT)
An operations philosophy focused on continuous waste elimination and variability reduction by ensuring materials arrive where needed only when needed.
Supplier partnerships
Collaborative agreements between buyers and vendors focused on mutual waste removal, cutting in-plant and in-transit inventory, eliminating unnecessary steps, and improving quality.
Jidoka
The practice of stopping production at the first sign of an abnormality or defect, combining automated detection with human judgment to prevent passing defects downstream.
Gemba
A Japanese term referring to the actual physical place where value-creating work is done; managers conduct "Gemba walks" to observe operations directly and interact with frontline employees.