1/49
Plant biology
as plants moved from an aquatic environment to land many adaptations were evolved.
those include a vascular system, roots, and seeds among others
the dominant type of plants on the planet are flowering plants known as angiosperms.
Most of our food comes from a few hundred domesticated species
Two groups of angiosperms
angiosperms are divided into two categories based on several structural features.
these two groups are called monocots and dicots
these terms derive from the first leaves of the plant embryo which are cotyledons
the monocots have one leaf while the dicots have two
Monocots
a large group of related plants that include orchids, bamboos, and palms
monocot characteristics:
one cotyledon
parallel leaf venation
scattered vascular bundles
flower parts in multiples of threes or threes
fibrous roots
Dictos
most dicots are in a related group called the eudicots
most flowering shrubs and trees, as well as nearly all the fruits and vegetables that we eat are eudicots:
dicot characteristics:
two cotyledons
branched leaf venation
ring of vascular bundles
flower parts in four or fives or multiples or fours or fives
a taproot system
Transport in the xylem- Transpiration
the xylem is involved in the transport of water.
water is absorbed in the roots, travels up the stem in the xylem vessels in vascular bundles to the leaves.
the loss of water Vapor from the leaves and stems of plants is known as transpiration
transpiration also carries minerals throughout the plants and can cool the plant in hot climates
water is lost due to evaporation through the stomata, which allows for gas exchange in the leaf.
Water Potential Ψ
water potential is a measure of the potential energy per unit volume
this is always a relative measure. The standard is pure water at STP which has been assigned a water potential of zero.
water moves from an area of higher water potential to lower water potential
Determining the water potential
in living systems two factors need to be considered when determining water potential.
Solute potential
the release of energy during solvation by the formation of solute water bonds reduces the energy held in the water.
with no solutes dissolved in water, solute potential is an its maximum of zero. The more solutes that are dissolved the more negative in becomes.
Pressure Potential (Ψp)
changes in hydrostatic pressure affects the potential energy of the water. The higher the pressure the more potential energy the water has. Standard atmospheric pressure (101.3) kPa has a pressure potential of zero.
pressure potential can be negative or positive because it can be greater or less than atmospheric pressure.
water potential is the sum of solute potential and pressure.
A typical plant: Angiosperms
a typical plant body contains three basic organs: roots, stems, and leaves
plant organs consist of several types of tissues that carry out particular functions.
Roots
plants use a root system to:
anchor the plant to the soil
absorb and transport water and minerals
store food
some plants have modified roots to grow larger than necessary in order to store carbohydrates
Shoot system:
the shoot system consists of stems, leaves, and adaptations (for reproduction)
the shoot system is used by plants to absorb the suns energy and carbon dioxide from the air
a stem has nodes and internodes. A node is the part at which leaves are attached and internodes are the portions of the stem between the nodes.
Stem buds:
plants typically have two kinds of buds
terminal buds are at the apex of stems, with developing leaves and a compact series of nodes and internodes
axillary buds are found in the angles formed by the leaves and the stems.
in many plants the terminal bud produces hormones that inhibit growth of the axillary buds in a phenomenon called apical dominance.
Interdependence
plant root and shoot systems are interdependent.
plant roots depend on shoots for carbohydrates produced via photosynthesis
plant shoots depend on roots for water and minerals
water potential in plants:
most plant cells have positive Ψp and negative Ψs. This makes the water potential zero
most plants live in areas where the humidity is lower in the environment than in the leaves.
during the day water vapour leaves the air spaces in the mesophyll through open stomata in the lower epidermis of the leaf and stem
the evaporating water is drawn from the xylem in the vascular bundles
the vascular bundles are continuous with the roots so a column of water is formed connecting the roots, stems, leaves, and air spaces. This is known as a transpiration stream
Factors affecting transpiration
environmental factors can affect the rate of transpiration in plants
1. Light- controls the opening and closing of the stomata. As light increases, stomata open, speeding up transpiration.
2. Temperature- as the temperature rises the rate of transpiration also increases as water evaporates from the air spaces in the spongy mesophyll and diffuses out of the stomata.
3. Atmospheric humidity- increases in atmospheric humidity causes a decrease in transpiration due to the change in concentration gradient between the airspace’s in the spongy mesophyll and the atmosphere.
4. Wind current- increase in wind currents causes an increase in transpiration due to the removal of the water saturated air near the stomata.
Modified Stems:
stems may be modified for:
climbing, such as pea plant tendrils or
protection, such as the cactus spine
Plant tissues
each plant organ (root, stem, or leaf) has three types of tissues.
1. Dermal tissue provides a protective outer covering,
2. Vascular tissue provided support and long distance transport.
3. Ground tissue compares the bulk of the plant body and is involved in;
food production
storage and support
Dermal Tissue
dermal tissues form
a layer of tightly packed cells called the epidermis,
the first line of defence against damage and infection
a waxy layer called the cuticle, which reduces water loss
in a leaf, the epidermis is interrupted by tiny pores called stomata, which allow exchange of CO2 and O2 between the surrounding air and the photosynthesis cells inside the leaf.
each stomata is flanked by two guard cells that regulate the opening and closing of the stoma.
Leaf cross section Stomata
transpiration is controlled by the pair of guard cells surround each stomata
the guard cells change shape to open and close the stomata
guard cells open when they gain potassium ions (K+) and water from the surrounding cells. The cells actively transport potassium in and water follows by osmosis
the guard cells have unevenly this cell walls. The cell walls closer to the stomata are thicker and the cellulose molecules are oriented such that when the cell swells (becomes turgid) it bows away from the stomata creating a bigger gap.
stomata are generally open during the day and closed at night
during the day when light is present, CO2 can be taken in through the stomata to continue photosynthesis. At night there is no photosynthesis, the stomata is closed to preserve water.
potassium ion movement can be controlled by a hormone called abscisic acid produced in the roots during drought.
when abscisic acid is present, potassium ions leave the guard cells, water follows by osmosis and the stomata close.
Vascular tissue:
vascular tissue is composed of xylem and phloem and arranged in a vascular cylinder in a root or vascular bundles in the stem
Ground tissue:
ground tissues lie between dermal and vascular tissue.
eudicot stem ground tissue is divided into pith and cortex
leaf ground tissue is called mesophil
Cohesion Tension
the movement of water through the xylem can be explained through the cohesion tension theory,
loss of water Vapor in the leaves results in tension.
this means that Ψs and Ψf are both negative which means Ψw is extremely negative in the vascular bundles.
water Vapor enters the air spaces in the mesophyll (parenchyma) to replace the water lost through the stomata
- water is drawn up the xylem continuously due to cohesive forces between the water molecules and adhesive forces between the water molecule and the xylem vessel walls.
this movement of water is causes by water potential gradient in a plant. The Ψw is highest in the roots and lowest in the leaves,
Water is drawn in from the cortex in the roots to replace water that is lost in transpiration.
the tension caused by transpiration causes water to be drawn into the roots from the soil
Roots
the roots of a plant are responsible for absorbing water and mineral ions from the soil.
Surface area is increased through extensive branching of the root system and development of root hairs.
Mineral ions:
minerals are found in the soil as salts.
salts dissolve in the soul water and can move into root cells.
plants require minerals to make a variety of substances
calcium- required for cell walls
magnesium- used to make chlorophyll
iron- a cofactor in enzymes
Mineral ions enter the root in different ways
Passive transport
mass flow dissolved minerals move into the root along with the water
facilitated diffusion- from the soil into the root hairs down their concentration gradient
Active transport
when concentration is lower in the soil than the plant, potassium, nitrate, and phosphate are commonly moved into the root hairs by active transport
Mutualistic relationships
close association with a fungus (mycorrhiza), minerals can pass directly from the fungal hyphae to the root cells
Phloem
the function of phloem is to move organic molecules throughout the plant. This is known as translocation
the organic molecules (sugars, amino acids, hormones) are dissolved in water producing a substance known as phloem sap
phloem consists of two types of living cells:
1 sieve tube cells- stacked end to end, these cells are perforated to allow for movement of solutes.
2. Companion cells- connected to sieve tube cells by plasmodesmata, they produce and transport proteins to the sieve tube cells in order to keep them alive
Translocation
xylem moves water and dissolved minerals in only one direction, from roots to leaves.
phloem moves organic compound in any direction throughout the plant.
translocation always moves organic material from a source to a sink.
this type of movement occurs through a pressure flow mechanism
phloem sap moves passively throughout the plant as a result of a hydrostatic pressure gradient
At source:
the producers of photosynthesis (sugars and amino acids) move from leaf cells to phloem by active transport
this sugar loading raises the solute concentration at the source end of the phloem tube
high solute concentration draws water into the tube from the xylem by osmosis.
this inflow of water raises water pressure of the source end of the phloem tube.
At sink
sugars and amino acids leaves the phloem by active transport
this reduces the solute concentration at the sink end of the phloem tube
low solute concentration causes water to return to the xylem by osmosis
the outflow of water lowers the water pressure at the sink end of the phloem tube
Proving pressure flow mechanism
phloem sap moves around points at a faster rate than can be explained by diffusion.
the pressure flow mechanics can be difficult to test as mechanisms for testing disrupt the structure and function of the phloem tubes.
natural phenomena have bee observed that prove this mechanism, most notable the feeding of aphids.
aphids insert a stylet into a sieve tube cell in the phloem in order to feed off the sugars produced by the plant.
If the aphid stylet is inserted closer to the source, the flow of sap has been observed to be faster if the stylet is inserted closer to the sink
this increase in flow rate seems to indicate that the sap in under higher pressure when closer to the source
xylem
composed of a column of dead cells when mature
continuous tube of cells enables an unbroken column of water (cohesive forces)
thickened with lignin to withstand negative pressure as water Vapor is lost
transport water and minerals from root to leaves.
phloem
composed of a column of living cells with perforated cell walls.
Living cells enable substance to be loaded by active transport
companion cells carry out cell functions and supply energy for active transport.
transport sugars, amino acids, and hormones to all parts of the plant by mass flow
Sexual reproduction in angiosperms
the flowers produced by angiosperms contain the plants reproductive organs
the female reproductive organs are called the carpel
the male reproductive organs are called the stamen
the seeds form inside the flower.
the mature seeds are enclosed in a case
Power structure:
sepals - when in the bud stage the sepals protect the developing flower
petals- attract insects or other animals for pollination
pollen- contain male gametes
anthers- produce pollen
filaments- hold anthers up for wind
stigma- receives pollen grains
style- holds up stigma to receive pollen
Control of flowering
flowering involves a change in the expression of genes in the cells of the shoot apex.
new proteins are produced and the cells and tissues that make up flowers begin to develop from meristems rather than leaves
plant flowering is influences by the amount of light they receive. This is known as photoperiodism
in flowering the central factor is the period of darkness the plant experiences.
plants respond to darkness using a leaf pigment called phytochrome
phytochrome
this pigment exists in two forms inactive Pr and active Pfr
active fr is rapidly produced from inactive pr during daylight. This conversation is in response to an increase in red light (600nm) which is absorbed by Pr
in darkness, the per reverts slowly to the more stable pr
Long day plants
these plants flower when the days are longest and the nights are short
these plants respond to increased amounts of Pfr.
since the days are longer more Pfr is produced and the shortened nights only allow for a small amount of Pfr to be converted back into pr
these plants flower in the late spring to early summer
Short say plants
these plants flower when nights are longer and days are shorter
in short day plants Pfr inhibits flowering. As the days get shorter less pr is converted to Pfr and during the longer nights more of the Pfr is converted back into pr allowing flowering.
these plants flower in late summer or autumn and the amount of darkness must be over a critical period unique to each species, ex. Soybeans, coffee, poinsettas
Day neutral Plants
some are unaffected by the photoperiod and will flower when they reach a certain stage of maturity, regardless of day length
Pollination
for the seeds to develop, pollen grains from the anthers must reach the stigma of the carpal.
this process is called pollination
there are tow types of pollination used by angiosperms
self pollination- male and female gametes come from the same plant
cross pollination- the male and female gametes come from two different plants
Fertilization
occurs when male and female gametes meet and form a zygote
occurs in ovule of the flower.
when pollen from the right species arrives they germinate on the style producing a pollen tube
the pollen tube enters the ovary and a pollen nucleus travels down the tube to fuse with the ovule nucleus.
Seed structure (dicot)
fertilized ovules develop into seeds, which protect the developing embryo
seeds are held within a seed, fruit, pod, pr nut.
seeds have the necessary components to ensure successful germination:
embryo root (radicle) and shoot (plumule)
cotyledon
testa (seed coat)
micropyle
dicot plants seeds contain two cotyledons which store food reserves (starches) for germination.
cotyledons are surrounded by a hard protective seed coat called the testa which protects the tissues from the environment.
the testa contains a small pore called the micropyle through which water is absorbed to begin germination.
seed dispersal
seeds need to be moved to locations away from their parents in order to minimize competition.
there are many seed dispersal mechanisms:
seed pods dry out and snap causing the seeds to be ejected som distance from the parent.
fruits are eaten by animals, which cannot digest the tough seeds. The seeds are then deposited in rich fertilizer a long distance from their parent to germinate
nuts are collected by animals which bury them as reserve over winter. The animals may not dig them up and they germinate
Germination
germination is the development of the seed into a new plant
seeds remain dormant until conditions are ideal.
temperature- suitable temperatures activate enzymes within the seed
water- most seeds contain about 10% water and therefore require water to germinate
oxygen- essential for aerobic respiration
Process of germination
germination begins as water is absorbed through the micropyle in a process called inhibition.
water rehydrates the stored food reserves and activate giberellin
giberellin stimulates the release of amylase by the cells in the outer layer of the seed (aleurone)
the amylase hydrolyses the starch in the cotyledon converting it into maltose
maltose is converted into glucose and transported to the embryo in order to be used in respiration to create energy for growth
absorption of water by the seed splits the testa so that the embryo can emerge and grow
when the leaves of the seedling grow above ground photosynthesis begins and takes over energy production
Gymnosperms
gymnosperms do not produce flowers
they produce seeds inside the cones
seeds have a coat that protects them but are not inside a case
sexual reproduction in Gymnosperms
gymnosperms produce their seeds inside cones. For this reason they are called conifers,
in some species male and female cones are produced by separate trees.
in most conifers male and female cones are produced by each tree
pollination and Fertilization
pollination process the same as in angiosperms
fertilization also requires the formation of a pollen tube to allow pollen to reach the egg
plants without seeds:
plants such as mosses and germs reproduce through spores
like gametes spores are haploids however, a spore can develop into a new plant without fertilization
the mature form called a sporophyte will release the spores
under the current conditions the spore will develop into a gametophyte
the two advantages for dispersal are that they are light and that they can survive unfavourable conditions by staying dormant until ideal conditions appear.