1/14
Looks like no tags are added yet.
Rectangular elbows are fittings used to create corners or change in direction of a ductline?
True
The reason the cheeks of a rectangular elbow may have to be fabricated in sections or pieces are?
Material utilization
added strength
limited sheet size
residential throat radius should be?
a minimum of one half of the cheek opening
A net pattern is with?
no allowances added
All lines used in the development of the net pattern should be?
Construction Lines
When developing a 90 degree elbow net pattern the first step is?
Begin by drawing a right angle
When developing a 6- degree rectangular elbow net pattern the first step is to?
Draw the baseline
When developing the 60 degree angle for a rectangular elbow, the short arc that cuts the first arc drawn is swung from?
Where the arc intersects the baseline
When measuring and marking the thraot radius and opening, this is done on the
Baseline
Circumference of a circle formula is
3.14 X diameter
A gross pattern contains?
All the allowances needed and notches required
The first step in developing a gross pattern is to?
Develop the net pattern
The allowance for the S & D connection is?
1/2”
The female portion of the Pittsburgh is?
Added to the runners
What angle is the slip and drive nipped at?
30 degrees