1/4
All of chapter 13
13.1
Rubber gloves shall be inspected carefully and given the air-test immediately prior to each time they are used. They shall not be worn inside out or without leather protector gloves.
EXEMPTION: Low voltage gloves may be worn without leather protectors if the wearing of leather protectors creates additional hazards or additional dexterity is required.
13.2
Rubber gloves shall be tested in the company approved test laboratory. under no circumstances shall rubber gloves be worn or used after the test laboratory expiration date.
13.3
Rubber gloves shall be put on before climbing within reach of minimum approach distance to conductors or apparatus energized at 50 to 39,000 volts.
13.4
Appropriate rubber gloves shall be worn when working within reach of minimum approach distance for the voltage being worked even when covered.
13.5
Rubber gloves shall be put on before opening any energized enclosures where conductors or apparatus energized over 50 volts and above can be contacted unless approved hot sticks can be used.