1/29
Vocabulary flashcards covering clinical patient positions, safe body mechanics principles, patient-handling injury statistics, and bed-making procedures.
Fowler’s Position
A patient position where the individual sits upright or semi-upright on the bed with the head of the bed elevated from 30♮ to 90♮, commonly used to facilitate breathing, eating, nasogastric tube insertion, and post-operative abdominal recovery.
High Fowler’s Position
A classification of Fowler's position where the head of the bed is elevated to an angle between 60♮ and 90♮.
Standard Fowler’s Position
A classification of Fowler's position where the head of the bed is elevated to an angle between 45♮ and 60♮.
Semi-Fowler’s Position
A classification of Fowler's position where the head of the bed is elevated to an angle between 30♮ and 45♮.
Prone Position
A position in which the patient lies flat on their abdomen with the head turned to one side, indicated for severe Acute Respiratory Distress Syndrome (ARDS) to improve oxygenation, spine or back care, and full extension of hip and knee joints.
Sims’ Position
A semi-prone position where the patient lies on their side with the top leg flexed sharply at the hip and knee and the bottom arm behind them, used for enema or suppository administration, rectal exams, and airway drainage in unconscious patients.
Supine Position
A resting or examination position where the patient lies completely flat on their back facing upward, supported with pillows, trochanter rolls, or footboards to prevent external rotation and foot drop.
Knee-Chest Position
A position where the patient kneels on the bed or examination table with the chest resting against the surface and thighs perpendicular to the bed (90♮ angle), utilized for sigmoidoscopy, emergency management of cord prolapse, and correcting postpartum uterine retroversion.
Dorsal Recumbent Position
A position where the patient lies on their back with knees flexed and feet flat on the bed or table, used for urinary catheterization, abdominal palpation, pelvic examinations, and perineal care.
Lithotomy Position
A position in which the patient lies on their back with hips and knees flexed, hips positioned at the edge of the examination table, and legs raised and supported in stirrups, indicated for childbirth, Pap smears, and pelvic or urological surgeries.
Lateral Position
A side-lying position where the patient rests on one side with knees and hips flexed, using pillows under the head, behind the back, and between the knees to maintain spinal alignment and relieve sacral pressure.
Trendelenburg Position
A position where the patient lies supine on a surface tilted so that the head is lower than the feet at a 15♮ to 30♮ incline, used for pelvic and lower abdominal surgeries, central venous catheter insertion, and managing shock or hypotension.
Reverse Trendelenburg Position
A position where the patient lies flat on their back with the entire bed tilted so the head is elevated higher than the feet, utilized for GERD, laparoscopic upper abdominal surgeries, elevated ICP, and respiratory elevation in obese patients.
Body Mechanics
The coordinated use of body alignment, balance, and movement to perform physical tasks safely, efficiently, and with minimal musculoskeletal strain.
Broad Base of Support
A fundamental body mechanics principle requiring healthcare providers to keep their feet shoulder-width apart to maximize balance and physical stability during patient care.
Pivoting (Body Mechanics)
The practice of turning the entire body by moving the feet directly toward the work area instead of twisting the spine, avoiding severe spinal muscular strain.
Waist-Level Bed Height
The optimal ergonomic working height to which a patient's bed must be raised prior to initiating care, transfers, or bed making to eliminate stooping and awkward postures.
Mobility Assessment
A pre-transfer evaluation of a patient's body weight, degree of cooperation, and weight-bearing ability to determine the safest handling method and necessary assistive devices.
Musculoskeletal Disorders (MSDs) in Healthcare
Work-related injuries affecting muscles, tendons, and nerves; nursing assistants experience an MSD incidence rate that is more than 5 times higher than the average across all private industries.
Primary Cause of Patient-Handling Injuries
The failure to utilize mechanical lifting equipment or assistive devices during patient repositioning, transferring, or lifting, accounting for over 80% of healthcare handling injuries.
Prevalence of Back Injuries in Nursing
Occupation-related back injuries or chronic back pain experienced by approximately 38% of nurses during their careers, which leads up to 20% of bedside nurses to leave direct patient care.
Economic Cost of Healthcare Back Injuries
The direct and indirect financial toll generated by work-related back injuries within the U.S. healthcare industry, estimated at 20 billion annually.
Gatch Bed
A manual hospital bed operated by hand cranks located at the foot of the bed to adjust bed height, head elevation, and knee positioning.
Electric Hospital Bed
A hospital bed operated via side-rail or hand-held electronic controls to adjust bed height, head elevation, and knee gatch settings effortlessly.
Drawsheet (Chux)
A waterproof or cloth linen layer positioned beneath the patient's torso across the middle of the mattress, utilized for lifting, turning, shifting, and fluid absorption.
Closed Bed
An unoccupied bed prepared for a newly admitted patient or someone away for an extended duration, where the top sheet and bedspread are pulled all the way to the head of the bed over the pillow to keep linens clean and free from airborne dust.
Open Bed
An unoccupied hospital bed prepared for an ambulatory patient out of bed for a brief period, constructed by fan-folding the top linens back to the foot of the bed to allow easy and independent re-entry.
Occupied Bed Making
The nursing procedure of changing bed linens while the patient remains in the bed due to immobility or strict physician-ordered bed rest, emphasizing safety, privacy, and spinal alignment.
Opposite Side Rail Safety
The essential safety practice of raising the side rail on the side of the bed opposite the nurse when turning an occupied patient toward that edge.
Final Bed Safety Checks
The mandatory post-procedure clinical sequence performed prior to leaving a patient's room: placing the bed in its lowest position, locking the wheels, and ensuring the call light is within the patient's immediate reach.