1/96
Looks like no tags are added yet.
What are the three posteriorTHR hip precautions?
No flexion beyond 90 degrees, no internal rotation and no adduction past midline.
Why are hip precautions important?
To reduce the risk of hip dislocation during recovery.
How long are THR precautions generally followed?
Approximately 6–8 weeks or as directed by surgeon
Why is sitting on a low toilet a concern after THR?
It can cause hip flexion beyond 90 degrees and increase dislocation risk.
What is the purpose of a raised toilet seat?
Raises toilet height to reduce hip flexion when sitting and standing.
What is an over-toilet frame?
A frame over the toilet providing a raised seat and armrests for transfers.
How should a client position their operated leg when sitting on the toilet?
Extend the affected leg forwards to avoid excessive hip flexion.
How should a client approach an over-toilet frame?
Turn using small steps until the toilet is behind them then back up until their legs touch it.
How should a client stand from an over-toilet frame?
Push through the armrests and keep the operated leg extended forward before standing.
Why should a client avoid twisting when turning towards the toilet?
Twisting can cause unwanted hip rotation and increase dislocation risk.
When might a raised toilet seat with arms be useful?
When space is limited but the client needs extra height and arm support.
What environmental factors should be considered before recommending toilet equipment?
Available space, toilet height, nearby fixtures and equipment stability. lighting in bathroom (night light)
How can a long-handled reacher assist with toileting?
Allows the client to retrieve clothing without bending forward.
Why might elastic-waisted trousers be recommended after THR?
They are easier to manage without excessive bending and reaching.
How can a bottom wiper assist someone after THR?
Extends reach for wiping without excessive bending or twisting.
Why should toilet paper placement be considered after THR?
To prevent excessive bending or twisting when reaching for it.
A client refuses toilet equipment. How should you respond?
Explore their concerns, explain the benefits, and offer to trial suitable options without forcing a decision.
Why might someone with a THR struggle with lower-body dressing?
Hip precautions restrict bending and reaching towards the feet.
What is the main purpose of a sock aid?
Allows socks to be put on without bending forward or excessively flexing the hip.
Why check whether a client wants to use a sock aid?
Education should address their goals and willingness rather than imposing equipment.
Why demonstrate the sock aid before asking the client to try it?
Allows them to observe the correct technique before practising.
Why should the sock not be pulled too far into the sock aid groove?
It needs to remain correctly positioned so the toes can enter the sock.
How should the client position their toes when pulling on a sock?
Point toes towards the floor to help guide the foot into the sock.
What should you do after demonstrating the sock aid?
Ask the client to practise while you observe and provide feedback.
What is teach-back?
Asking the client to explain or demonstrate what they have learnt.
How does teach-back assess learning?
It checks whether the client can explain or demonstrate instructions correctly.
What is modelling in client education?
Demonstrating a task so the client can observe how it is performed.
What is guided practice?
Allowing the client to practise a task with support and feedback.
What is primacy in client education?
People often remember information best when they hear it first.
Name three ways to improve recall of instructions.
Repetition, simplification, and emphasising important information.
What is repetition in client education?
Repeating important information to improve recall.
What is simplification in client education?
Using short clear instructions and avoiding unnecessary information.
Why combine verbal instructions with physical demonstrations?
Provides different ways to understand and remember the task.
What is generalisation in client education?
Applying a learned skill to different situations or environments such as at home.
A client repeatedly makes a sock aid mistake. What should you do?
Pause, re-demonstrate the difficult step and allow them to practise again.
How do you check whether a client can use a sock aid independently?
Observe their technique and check they can follow hip precautions safely.
How can rheumatoid arthritis affect hand function?
Pain, inflammation, stiffness and joint changes can reduce grip strength and hand function.
Why might an OT recommend a wrist splint for someone with RA?
To support and protect the joint, reduce painful movement, and maintain alignment.
How can a wrist splint support occupational performance?
Reducing pain and supporting the wrist may make everyday hand activities more manageable.
Does a wrist splint prevent all hand use?
No it supports and protects the wrist while aiming to maintain useful function, espeically of fingers and thumb.
What should you ask before introducing a wrist splint?
Previous splint experience, current symptoms, expectations and willingness to wear one.
Why explain the purpose of drawing a splint pattern?
To show how the material will be shaped to fit and support the wrist and hand.
Which anatomical landmarks must be marked on the wrist splint pattern?
Wrist crease, palmar creases, CMC joint. thenar space and approximately two-thirds up the forearm.
Why must the thenar space be accommodated in a wrist splint?
To avoid restricting or compressing the thumb muscle area.
What is radial deviation?
Movement of the wrist towards the thumb side.
What is ulnar deviation?
Movement of the wrist towards the little finger side.
What wrist alignment is required in the splint demonstration?
Neutral alignment without radial or ulnar deviation and with slight wrist extension.
Why identify the wrist crease when drawing a splint pattern?
To ensure the splint fits around the wrist without unnecessarily restricting movement.
Why check a splint pattern against the client's hand?
To identify pressure areas and ensure appropriate support and fit.
A client reports discomfort from a splint. What should you do?
Stop and reassess the fit and positioning rather than asking them to tolerate discomfort.
How can rheumatoid arthritis affect occupational performance?
Pain, stiffness, and reduced hand function can make dressing, cooking, writing, and other daily tasks difficult.
How can COPD affect occupational performance?
Breathlessness, fatigue, and reduced endurance make ADLs and IADLs harder.
What is dyspnoea?
Shortness of breath or difficulty breathing.
Why can COPD make showering difficult?
Standing, reaching, and completing several tasks can increase breathlessness and fatigue.
Why might shopping be difficult for someone with COPD?
Walking, carrying groceries and navigating busy environments require energy and endurance.
What is the purpose of an OT home assessment?
Identify barriers, risks, equipment, and supports needed for a safe discharge.
What is the difference between an initial assessment and a home assessment?
An initial assessment gathers information about the person while a home assessment examines their actual environment.
What should you assess at the entrance of a client's home?
Steps, ramps, handrails, pathways, access, and potential trip hazards.
Why assess the bathroom during a COPD home assessment?
To identify difficulties with shower access, transfers and managing personal care safely.
What difficulties can a shower over a bath create?
Stepping over the bath requires balance, strength, and energy and may increase falls risk.
What equipment could help someone with COPD shower safely?
A shower chair grab rails or suitable bathroom modifications.
How does a perching stool assist someone with COPD?
Allows seated task performance and reduces energy demands.
What is energy conservation?
Managing available energy to reduce fatigue and make daily activities easier.
How does activity pacing help someone with COPD?
Breaking tasks into manageable stages and including rest breaks can reduce fatigue and breathlessness.
Why assess support networks before discharge?
To identify who can assist with shopping, housework, transport, and daily activities.
Why assess both ADLs and IADLs before discharge?
To determine whether the person can manage personal care and more complex activities needed at home.
What arrangements should be discussed before a home visit?
Date, time, transport, access to the home, and whether family or carers will attend.
A client is independent in hospital. Why might a home assessment still be needed?
Hospital independence does not guarantee home independence because environments and task demands differ.
How could an OT support someone struggling with meal preparation due to COPD?
Use pacing, seated preparation, task simplification, and suitable equipment.
Why establish a client's previous level of occupational performance?
It provides a baseline to identify changes in function following illness or treatment.
What bowel symptoms should you ask a client with bowel cancer about?
Changes in bowel habits, urgency, constipation, diarrhoea, pain, bleeding, and stoma management.
Why ask about bowel urgency during an OT assessment?
It can affect toileting, personal care, confidence, and participation outside the home.
How can chemotherapy affect occupational performance?
Fatigue, nausea, reduced appetite, neuropathy, and concentration difficulties can affect daily activities.
A client lives alone. What discharge information should you prioritise?
Home access, self-care, mobility, supports, equipment, and ability to manage daily routines.
Why ask about a client's usual daily routine?
To identify meaningful occupations and understand how their condition has changed participation.
What information should you gather about home accessibility?
Entrance, access, steps, pathways, internal layout, kitchen, bedroom, bathroom setup and toilet access.
A client gives one-word answers. How could you encourage discussion?
Use open-ended prompts, allow thinking time, and ask relevant follow-up questions.
A client becomes tired during the interview. What should you do?
Acknowledge their fatigue, offer a break, and prioritise essential assessment questions.
How can bowel cancer affect occupational performance?
Pain, fatigue, bowel urgency, treatment effects and possible stoma can affect self-care work and social participation.
Why is it important to ask about a client's support network?
To identify who can assist with daily activities, transport, shopping, and managing at home.
What is clinical reasoning in occupational therapy?
Using assessment information and professional knowledge to make appropriate intervention decisions.
Why consider a person's goals before recommending equipment?
Equipment should address actual needs and support meaningful occupational participation.
What is the difference between an impairment and an occupational performance problem?
An impairment affects body function while an occupational performance problem affects everyday activities.
Why consider the environment when assessing occupational performance?
Environmental barriers and supports influence how independently someone performs occupations.
How can you demonstrate client-centred practice?
Listen actively, explain options, respect preferences, and involve the client in decisions.
Why avoid excessive medical terminology when educating clients?
Clients may not understand it, making information harder to follow and remember.
A client refuses your recommendation. What should you do?
Explore their concerns, explain options, and respect their decision.
Why obtain consent before an OT intervention?
The client has the right to understand and agree to their involvement.
What should you do if you realise you gave incorrect information?
Acknowledge the mistake, correct it clearly, and check the client understands.
What should a useful reflection include?
Specific strengths, areas for improvement, and actions to develop future practice.
Why is saying the session went well insufficient reflection?
You need to identify what you did effectively and explain how it supported the client.
Introduction
Name, role, how are you, explain OT
What to say if client is not feeling well
I’m really sorry to hear that, do you think you’re feeling well enough for a chat? I’d really like to chat about …. which will help you get back to being independent.
Ending of session
Wrap up when you hear the knock.
I’ve really enjoyed my time
Talk about next steps
If you don’t finish: I’d love to pop back and finish this tomorrow afternoon.
Reflection for sock aid if i messed up
I think I had great rapport. I did get tangled in the sock aid, and panicked.
Splinting for child
More straps: better for stability, harder to take off
Opposite straps: harder to take off
Different splint material: thinner because child has less hand strength
shape splint off of the body, to prevent child from getting agitated
Anterior hip precautions
Avoiding hip extension, no external rotation.