1/59
Looks like no tags are added yet.
Specialized services for air freight include things like
pickup and delivery
The creation of the “Integrated” concept of air freight service addressed the Air mode shortfall (disadvantage) on the dimension of
accessibility
An Air Freight Forwarder handling high-priority cargo would typically have to pay and charge a(n)
Priority Reserved Rate
The three characteristics defining “Air Eligibility” include the nature of the
Commodity, Demand, Distribution Problems
During transportation mode selection, Air has advantages on the dimensions of
speed, reliability, and security
“DimWeight is calculated as
(actual volume)/(standard density)
“Air Eligibility” increases when the commodity is
perishable (physical or value)
The three types of Air Freight services are generally classified as
Air Mail, Air Express, Air Freight
The creation of the “Integrated” concept of air freight service addressed the Air mode shortfall (disadvantage) on the dimension of
accessibility
“DimWeight” can be defined as the “_____ of the shipment, adjusted for the _____ of a shipment that would _____ at the same time as it _____.”
volume, standard density, gross out, cubes out
It is the primary responsibility of the _____ to ensure cargo weights are accurate and documented.
Operator
Unit Load Devices are used ONLY in areas of the cargo compartment
with restraint systems classified as appropriate for that specific equipment
Certification and documentation that all cargo has been properly loaded and secured is required for
each leg of every flight carrying cargo/baggage
“Cargo that is not contained in a ULD certified for the aircraft CLS nor enclosed in a compartment certified for bulk loading” is referred to as
Special Cargo
The audience for AC 120-85B includes
air carriers and Operating Certificate holders conducting cargo operations
Transportation of a motor vehicle or “outsized” cargo requires compliance with _____ rules and requirements.
Special Cargo
Minimum performance standards defined by the FAA for cargo restraints are found in
TSO-C172
A Unit Load Device (ULD) is a means of
grouping, transferring, and restraining cargo for transit
Unit Load Devices (ULDs) include both
Containers and Pallet-Net combinations
The audience for AC 120-85B includes
air carriers and Operating Certificate holders conducting cargo operations
Passenger to cargo aircraft conversions typically occur at the -year point, resulting in an additional years 10-15 years of life remaining
18-20
Current freighter aircraft are modifications of passenger aircraft designs. Examples of MEDIUM WIDE-body aircraft conversions would be
B767, A330
Cargo feeder aircraft are typically used to
distribute ecommerce shipments to smaller airports
Operational considerations for determining the type of freighter aircraft to use include payload vs. range trade-offs, network structure, AND
day of week or airport altitude scheduling factors
The different types commercial aircraft that carry cargo include freighters, feeder aircraft, AND
passenger/belly cargo
Converting passenger aircraft to a freighter configuration includes removing passenger seats and amenities, installing or modifying fire detection/suppression systems, AND
installing a side cargo door
Examples of cargo feeder aircraft include
C-208 Caravan, ATR 72, CRJ 200SF
Operational considerations for determining the type of freighter aircraft to use on a route include payload vs. range trade-offs, network structure, AND
freighter vs. passenger aircraft performance
Converting passenger aircraft to a freighter configuration includes removing passenger seats and amenities, installing or modifying fire detection/suppression systems, AND
installing main-deck Cargo Loading System (CLS) equipment
The three categories of transport certificate holders (carriers) required to have an OpSpec, Manual of Procedures and Training Program for Dangerous Goods are
Passengers & Baggage, Will Carry, Will Not Carry
There are three main requirements for the CONTENT of the Dangerous Goods Training Program. One of the three is that the program must cover
recognition of items that may contain undeclared DG materials
The two main components of the guidance provided in AC 121-40, Dangerous Goods Transportation Operations, cover the _____ and the _____.
Dangerous Goods Training Program, Dangerous Goods Program Manual
There are three main requirements for how the Dangerous Goods Training Program will be CONDUCTED. One of the three is that covered carriers must provide DG training
initially, and recurring annually
The “baseline” federal regulatory authority for the movement of Dangerous Goods by air comes from
49 CFR HMR §175 Carriage By Aircarft
The three categories of transport certificate holders (carriers) required to have an OpSpec, Manual of Procedures and Training Program for Dangerous Goods are
Passengers & Baggage, Will Carry, Will Not Carry
The overall guidance for DG transportation program rests in the federal
Hazardous Materials Safety Program (HMSP)
The Material Handling Systems in cargo buildings include truck docks and scales, transfers systems, AND
Material Handling Equipment (MHE)
Cargo equipment that is installed in or carried on aircraft include Unit Load Devices (ULD), Cargo Restraint System (CRS), AND
Cargo Loading System (CLS)
The Material Handling Systems in cargo buildings include Material Handling Equipment (MHE), transfers systems, AND
truck docks and scales
Cargo building Material Handling equipment (MHE) includes
lifts, elevators, racks
Two key manufacturers of cargo Loaders and High Loaders include
JBT, TREPEL
Integrated carrier cargo handling facility equipment must be able to to meet turn around requirements in a very short period of time.
rapidly scan and sort small packages
Which type of cargo equipment does NOT require certification by the FAA?
Transporter
Which type of cargo equipment does NOT require certification by the FAA?
High-Loader
Chapter 3 of the AC 121-40 specifically covers the requirements for the _____ of transporting Dangerous Goods by air.
Manual
The three main content areas of the Dangerous Goods Manual (described in AC 121-40) specifically include
the certificate holders Dangerous Goods policies and procedures
The procedures manual for the handling and transport of Dangerous Goods required by AC 121-40 must be approved by the
FAA
The requirements to develop & maintain a formal procedures manual for the handling and transport of Dangerous Goods under AC 121-40 applies to
§121 & §135 certificate holders transporting Pax, Baggage, Cargo, or COMAT
The procedures manual for the handling and transport of Dangerous Goods required by AC 121-40 must clearly identify
the person responsible for ensuring the FAA is provided the most current version of the manual
Each individual certificate holder will include their procedures for handling Dangerous Goods in their
OpSpec
The procedures manual for the handling and transport of Dangerous Goods required by AC 121-40 must specifically cover the information regarding the certificate holders Dangerous Goods policies, and their procedures for _____, and _____.
rejecting nonconforming packages, reporting DG incidents/discrepancies/violations
The three main content areas of the Dangerous Goods Manual (described in AC 121-40) specifically include procedures for
reporting Dangerous Goods incidents, discrepancies, and violations
The requirements to develop & maintain a formal procedures manual for the handling and transport of Dangerous Goods under AC 121-40 applies to
§121 & §135 certificate holders transporting Pax, Baggage, Cargo, or COMAT
The three main content areas of the Dangerous Goods Manual (described in AC 121-40) specifically include
the certificate holders Dangerous Goods policies and procedures
The two primary “new” threats to air cargo security today- beyond the traditional issues of the protection of high-value cargo and customs processing- include
hostile takeover of air cargo aircraft
The regulatory authority for transportation cargo security flows directly from the creation of
49 CFR
The TSA responsibilities in Air Cargo Security include
research and development of screening and detection technologies
The main Air Cargo Security responsibility of the TSA involves:
screening of passengers and baggage
The responsibility for the screening of air cargo is primarily on
carriers
The two primary “new” threats to air cargo security today- beyond the traditional issues of the protection of high-value cargo and customs processing- include
use of cargo to introduce IED on passenger aircraft