physics pt.4 pp1

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/14

encourage image

There's no tags or description

Looks like no tags are added yet.

15 Terms

1
New cards

What is the conservation of energy and what is dissipation?

Energy cannot be created or destroyed—it can only be transferred (energy before = energy after). Dissipation is storing energy in less useful ways ('wasted' energy), very often as internal energy to the surroundings.

2
New cards

How is energy transferred when a system changes, and what is the difference between gravity and GPE?

Energy transfers are caused by heating or work done (by a force or by a current). Gravity is a force (Paper 2), whereas gravitational potential energy (GPE) is an energy store (Paper 1).

3
New cards

List the 5 main energy stores and what contains them

Chemical: food, fuel, batteries. Internal (thermal): everything (the hotter, the more internal energy). Kinetic: anything moving (the faster, the more KE). Gravitational potential: anything above the ground (the higher, the more GPE). Elastic potential: anything stretched (the more stretched, the more EPE).

4
New cards

Model answer: Describe the energy store changes when wood is burnt to heat a pot of water

The chemical potential energy store of the wood decreases, and the internal energy store of the water and surroundings increases.

5
New cards

Model answer: Describe the energy store changes when a remote-controlled car accelerates

The chemical potential energy store of the battery decreases, the kinetic energy store of the car increases, and the internal energy store of the surroundings increases as some energy is transferred to the surroundings.

6
New cards

Model answer: Describe the energy store changes when a ball falls, and explain what happened to 100J of GPE once it comes to rest

Falling: GPE of ball decreases, KE of ball increases as it speeds up, and internal energy of surroundings increases. Once at rest: all 100J of energy has been transferred due to work done by forces and dissipated into the surroundings.

7
New cards

How do you reduce unwanted energy transfers in moving parts (e.g. a bike chain) and increase efficiency?

Moving parts cause work done due to friction, heating them up so energy dissipates to surroundings. Lubricate (e.g. with oil) to decrease friction; this decreases wasted energy, increases useful energy transferred, and therefore increases efficiency (efficiency = useful energy ÷ total energy).

8
New cards

Model answer: How do you reduce unwanted energy transfers in buildings?

Materials with high thermal conductivity have a higher rate of energy transfer by conduction (conductors), whereas low thermal conductivity = insulators. Thick walls and wall insulation (low thermal conductivity) lower the rate of conduction so less energy is transferred from the house to the surroundings, slowing down the rate of cooling.

9
New cards

State the equations for kinetic energy, elastic potential energy, and gravitational potential energy

Kinetic energy = 0.5 × mass × speed². Elastic potential energy = 0.5 × spring constant × extension². Gravitational potential energy = mass × gravitational field strength × height. (Note: by conservation of energy, GPE at start = KE at end in falling object calculations).

10
New cards

State the power equations and the definition of 1 Watt

Power = energy ÷ time, or Power = work done ÷ time (since work done = energy transferred). 1W = 1J/s (Power in W = energy in J ÷ time in s).

11
New cards

What are non-renewable energy resources, and what are their advantages and disadvantages?

Cannot be replenished (replaced) once used: fossil fuels (coal, oil, natural gas) and nuclear fuel. Advantages: very reliable—can release energy whenever we want. Disadvantages: will run out; fossil fuels release CO₂ (greenhouse gas causing global warming); nuclear fuel produces radioactive waste that must be disposed of carefully to avoid contaminating soil/water (causing cancer via ionising radiation) or irradiating wildlife.

12
New cards

Why do we keep burning fossil fuels despite knowing their environmental impact?

Currently, less-polluting renewable energy sources are generally too expensive to generate enough electricity reliably. Also, there are political and economic pressures on governments (e.g. countries whose economies rely heavily on extracting and exporting oil).

13
New cards

What are renewable energy resources and what is each type?

Can be replenished as used: Biofuel (burning plants), Wind (pushes turbines), Hydro-electricity (water dropped from a dam), Geothermal (heat from underground), Tides/waves (force of the sea), Sun (solar panels).

14
New cards

What are the advantages and disadvantages of renewable energy resources?

Advantages: will never run out; cause no greenhouse gas emissions/global warming (except biofuel); tides (regular/predictable) and biofuels (can be burnt when needed) are reliable. Disadvantages: most are unreliable (e.g. not always windy); equipment like wind turbines/dams can be expensive, unattractive, and damage natural habitats; biofuels release CO₂ (greenhouse gas).

15
New cards