1/64
Looks like no tags are added yet.
What is differential pressure? (Homework)
The difference between cut-in pressure and cutout pressure
_________________ Means the output Voltage will be proportional to the supply voltage.
ratiometric
What is the Absolute Pressure at a gauge placed at 33ft Below sea level which has 30 psi of air supplied?
59.4 PSI
Force is a push or pull on an object that causes it to accelerate or change its motion.
True
____________ is a materials mass per unit of volume. A measurement of how much matter is in a given space.
Density
Grounding is good way to get rid of harmonics
False
3 Things valve schematic symbols show you?
Air flow, positions and exhaust systems
3/2 Port on pneumatic boxes =
2 postions
4/3 Port on pneumatic boxes =
3 postions
Pressure changes at:
different elevations
What is used to identify specific weight?
Gamma(Y)
Head refers to:
height of column
What is Specific Gravity?
Is the ratio of the density of a substance compared to the density at 4degrees
What is hydrostatic Pressure?
The pressure exerted by a fluid at equilibrion at a given point with there fluid due to force of gravity
What is a Signal?
Time varying voltage, current or electromagnetic field that conveys information.
used in electronics and telecommunications
What’s Transistents
Sudden changes in energy, voltage, current from devices switching states
A ammeter will show 3A while conductor is extremely hot because…
Harmonic effect
Harmonic currents can appear on:
Line and neutral conductors
What’s constructive interference?
Waves reinforce each other = large amplitude
What is destructive interference?
waves cancel each other = smaller amplitudes
What is a Node?
A point where resulting wave has little or no movement
What is Frequency Variation?
When frequency moves away from intended/nomial value
Reactors are important for:
VFD’S
VFD ARE?
Non linear loads which create poor power quality and harmonics
Load reactor protects?
Motor
What is MASS
unit = KG.
The amount of matter in a object, regardless of the volume or forces acting on it
What is Density?
Mass Per unit volume. measures how much matter occupies a given space
What is Volume?
Unit = m³ or L
The amount of 3D space occupied by a substance or object.
What is Force?
Unit = N(newton)
A push or pull that can cause an object to accelerate or change its motion.
What is Pressure?
unit = Pascal(Pa)
the amount of force exerted per unit area
What is weight(Force)?
Force acting on a object due to gravity determined by its mass x gravity acceleration
What is Latent Heat?
Hidden Thermal Energy That exist when matter changes states that can’t be measured in form of temp change
What is Air conditioning tons?
amount of heat required to melt 1Ton of ice
What is BTU?
The amount of heat required to raise one pound of water one degree F
What is Bernoulli’s Principle?
An increase in the speed of a fluid occurs simultaneously with a decrease in pressure or potential energy.
What is Hydrodynamic Pressure?
Pressure associated with a fluid in motion. moving fluid = dynamic effects
What is a ORIFICE Plate?
a small opening installed inside a pipe to restrict flow or create pressure difference
What is a tapered Tube?
Narrow at bottom wider at top
What is Laminar Flow?
smooth Path 2000R OR LESS
What is Turbulant Flow?
4000R AND UP = UNSTABLE PATH
FULLY TURBULENT =
10 000 AND UP
What is conduction?
Transfer of heat thru solid(body)
What is Convection?
Transfer of heat thru fluid
What is radiation?
Travel through waves
What its Seebeck voltage?
Voltage produced when two different metals have junctions at different temps(ex. thermocouple)
A RTD is:
Thermresistive
a Thermocouple:
Thermoelectric
Absolute pressure can be less than zero PSIA.
false
absolute vacuum corresponds to:
0 PSIA and approximately −14.7 PSIG.
ISA IS:
International society of automation WHICH CREATES THE ANSI
ISA Instrumentation symbols are?
Standardized graphical symbols and identification letters used in piping + instrumentation diagrams
What is Fluid Velocity?
Is a measure of its resistance at a given rate
What are Sones?
Are a linear unit of measurement for the perceived loudness of sound to a human ear
Freezing point of water in celcius?
0d
Boiling point of water in Celsius?
100d
Freezing point of water in Fahrenheit?
32D F
Boiling point of water in Fahrenheit?
212D
What is deposition?
Gas changes directly into a solid
How does a RTD Measure temperature?
Changes in electrical resistance
What is the cold reference juntion?
The reference junction compared with the hot measuring junction
What Is specific Gravity?
Is the ratio of the density of substance compared to the density at 4Degrees C
What is weight(Force)?
The force acting on a object due to the acceleration of gravity multiplied by mass
What is Transients?
A short duration disturbance in electrical power
3 MAIN PARTS OF UPS?
Rectifier batteries and inverter
What is Pressure?
Force applied over specific area