1/18
Looks like no tags are added yet.
Remote station systems operated by?
Remote station systems were originally owned and operated by municipal fire departments
What are initiating device circuits?
conventional zone type circuits
what are signaling line circuits?
used to connect addressable initiating devices and other equipment with control units
what are notification appliance circuits?
output circuits that are used to connect notification appliances to the system controls
What do codes specify?
When and where
What do standards specify?
how
Supervisory signals indicate?
off-normal suppression system
Local jurisdictions may change national codes and standards through the use of?
amendments.
A high rise is generally a building that is more than ? from the lowest level of fire department access to the highest occupiable level
75ft
Protection of control equipment?
required where equipment is installed in a location that is not constantly attended.
what is displayed when an initiating device actuates
control unit provides location and address of device that is actuated
Class X circuits have what in addition compared to Class A circuits?
short circuit protection
Loss of AC power is indicated by a ? signal
trouble
Monitoring for integrity is intended to detect?
grounds, loss of operating power, opens
Monitoring for integrity of IDC and NAC is accomplished through the use of a?
end of line resistor (EOL)
Addressable circuits monitor for integrity by?
interrogation (digital signals) and response; fire alarm control unit sends and monitors for a response
secondary power supplies for fire alarm systems must operate the system in standby for a period of at least ?
24 hrs
Installation personnel shall be ? by persons who are qualified in the installation inspection and testing of the systems
qualified or supervised