1/19
Looks like no tags are added yet.
Hb practical: what is hemoglobin made of?
Globin (protein) plus heme (porphyrin ring of 4 pyrrole rings joined by 4 methenyl bridges, holding one iron atom Fe). Oxygen attaches to the Fe2+. Colour of each Hb form reports what the iron is doing.
Hb practical: how is oxyhemoglobin (HbO2) prepared and what does it look like?
Blood diluted 1:100. Bright red. Found in arterial blood. Iron is Fe2+ carrying O2.
Hb practical: how is reduced Hb made and why does the colour change?
Add a few drops of sodium dithionite (a reducing agent) to the diluted blood. It removes O2 from HbO2, so the colour becomes red with a bluish tinge, like venous blood.
Hb practical: how is methemoglobin (MetHb) made and what colour is it?
5 ml of 1:10 diluted blood plus a few drops of 10% potassium ferricyanide (oxidizing agent). Iron changes from Fe2+ to Fe3+ (like rust), so it is brownish red and cannot carry O2. Normal level is 1 to 3% by auto oxidation.
Hb practical: causes and treatment of MetHb?
Congenital: HbM (treat with blood transfusion) or cyt b5 reductase deficiency (treat with reducing agents). Acquired: oxidizing agents, e.g. living near factories (treat with reducing agents such as vitamin C and glucose).
Hb practical: how do you tell HbO2 from HbCO?
Add sodium dithionite. HbO2 turns bluish because O2 is removed. HbCO stays cherry red because Hb binds CO about 200 times more strongly than O2, so dithionite cannot remove it.
Colorimetry: what is the principle?
More substance means darker colour, which means more light absorbed. The colorimeter measures this as absorbance, which is proportional to concentration. The substance must be coloured, or converted to a coloured product by a reagent.
Colorimetry: formula for the sample concentration?
Conc. sample = (A sample divided by A standard) multiplied by Conc. standard. Example: A std 0.40, A sample 0.32, standard 15 g/dL gives 12 g/dL.
Hb concentration practical: chemical principle of the cyanomethemoglobin method?
Ferricyanide oxidizes Hb to MetHb. Potassium cyanide converts MetHb to cyanomethemoglobin, a stable coloured product. Its absorbance is directly proportional to the Hb concentration.
Hb concentration practical: method steps and why?
Three tubes (blank, standard, sample) each with 2.5 ml reagent plus 10 microlitres of water, standard (15 g/dL) or blood. Mix, wait 5 min so colour develops, read at 540 nm against the blank (blank sets zero so only Hb colour is counted).
Hb normal values and abnormal states?
Male 14 to 18 g/dL, female 12 to 16 g/dL. Low is anemia (iron deficiency, hemorrhage, renal failure, bone marrow failure). High is polycythemia (high altitude, heart failure, COPD, cardiomyopathy).
Abnormal Hb: thalassemia versus sickle cell?
Thalassemia is a quantity problem: alpha or beta chains are made too little or not at all, giving microcytic hypochromic anemia. Sickle cell (HbS) is a quality problem: one amino acid is replaced, causing sickling, blocked vessels and hemolysis. MetHb and HbCO are dyshemoglobins (chain normal, iron or gas wrong).
Hb electrophoresis: principle and band patterns?
Separates Hb types by charge at pH 8.6 or 6.0; Hb is negative so it moves toward the positive electrode. Order from origin: A2, S, F, A. Beta thal minor: A lowered, A2 above 3.5%. Beta thal major: A absent, F and A2 high. Sickle trait: A plus S. Sickle disease: S only.
Blood sampling: serum versus plasma?
Serum comes from clotted blood, so it lacks fibrinogen and clotting factors (serum = plasma minus clotting material). Plasma comes from blood with anticoagulant, so it still has them. Use plasma for clotting factors, serum for glucose, cholesterol, albumin, enzymes, whole blood for things inside RBCs such as Hb.
Blood sampling: how do anticoagulants work?
Clotting needs Ca2+. Oxalate and fluoride make insoluble calcium salts. Citrate and EDTA make soluble calcium complexes that do not ionize. Heparin does not remove calcium, it blocks clotting enzymes directly. Caps: EDTA purple, citrate blue, oxalate and fluoride grey, heparin green, no additive red.
Blood sampling errors: fist clenching, tourniquet, drip arm?
Fist clenching raises K by 1 to 2 mmol/L (muscle releases K). Long tourniquet (3 min versus 1) gives hemoconcentration, lactate and low pH, K leaking from hypoxic cells. Drip arm with dextrose saline falsely raises glucose and lowers Na, Cl, urea, creatinine by dilution.
Hemolysis: definition and how it spoils results?
Rupture of red cells releasing Hb into plasma (red tint after centrifuging). Most common preanalytical error. Three effects: free Hb disturbs absorbance, leaked contents (LDH, AST, ALT, ALP, K) read falsely high, and dilution of plasma analytes (albumin, bilirubin, glucose, Na) reads falsely low.
Hemolysis practical: effect of tonicity on RBCs, and how do you read the tube?
RBC pressure equals 0.9% NaCl (isotonic). Hypertonic: water leaves, cells shrink (crenation). Hypotonic, e.g. water: water enters, cells swell and burst. Hemolysis gives a clear red tube. No hemolysis gives a cloudy opaque tube. Saline gives none, water gives hemolysis.
Hemolysis practical: why do NH4Cl and urea hemolyze but urea in saline does not?
The RBC membrane is freely permeable to NH4+ and to urea, so they enter and pull water in and the cell bursts. With urea in saline, the saline outside pulls the water back out (stabilizing action of saline), which is why uremic patients do not hemolyze.
Hemolysis practical: what do ether, saponin, HCl, NaOH and heat attack?
Lipid of the membrane: ether dissolves it, saponin lowers surface tension (bile salts, soaps and lysolecithin act the same). Protein of the membrane: acid, alkali and heat denature it. Acid and alkali give brown haematin; heat oxidizes Fe2+ to Fe3+, also brown.