Professor Messer Ethernet Standards 1.3

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/25

encourage image

There's no tags or description

Looks like no tags are added yet.

26 Terms

1
New cards

Ethernet

Most popular networking technology globally, known for its standardization and universality. It includes various types, speeds, cabling, connectors, and equipment. Typically uses twisted pair copper or fiber, operating in baseband (single frequency using the entire medium) as opposed to broadband, which uses multiple frequencies to share the medium.

2
New cards

10BASE-T and 100BASE-T Ethernet

Both use twisted pair cabling. Both require a minimum of Category 3 cable and support a maximum distance of 100 meters. 10 operates at 10 megabits per second, while 100 operates at 100 megabits per second.

3
New cards

100BASE-TX

Also known as "Fast Ethernet," uses two pairs of Category 5 minimum twisted pair copper wires and supports a maximum distance of 100 meters. Operates at 100 megabits per second.

4
New cards

1000BASE-T

Gigabit Ethernet, operates over Category 5 twisted pair cables, though Category 5 is now deprecated in favor of Category 5e. It uses all four pairs of wires and supports a maximum distance of 100 meters. 1 Gb/s , 125 MHz.

5
New cards

10GBASE-T

Provides 10 Gigabit Ethernet over copper using 4-pair balanced twisted-pair cables. It operates at a frequency of 500 MHz. It requires Category 6 cable with unshielded connections supporting up to 55 meters and shielded connections up to 100 meters. For Category 6A, both unshielded and shielded cables support a maximum distance of 100 meters.

6
New cards

40GBASE-T:

Provides 40 Gigabit Ethernet over 4-pair balanced twisted-pair cables using Category 8 cable. It supports a maximum distance of up to 30 meters.

7
New cards

100BASE-FX

Fast Ethernet over fiber. Uses a pair of multimode fiber cables and the same fiber as FDDI. It employs laser components and supports distances of up to 400 meters in half-duplex mode and 2 kilometers in full-duplex mode. In half-duplex, only one device can transmit or receive data at a time, while in full-duplex, both devices can communicate simultaneously.

8
New cards

100BASE-SX

A cost-effective version of 100 Megabit Ethernet over fiber, using LED optics and supporting a maximum distance of 300 meters.

9
New cards

1000BASE-SX

Provides Gigabit Ethernet using short-wavelength lasers, typically over multimode fiber. It supports distances ranging from 220 meters to 550 meters, depending on the fiber type.

10
New cards

1000BASE-LX

Offers Gigabit Ethernet using long-wavelength lasers. It supports distances of up to 550 meters on multimode fiber and up to 5 kilometers on single-mode fiber.

11
New cards

10GBASE-SR

Provides 10 Gigabit Ethernet over multimode fiber, supporting distances from 26 meters to 400 meters, depending on the fiber specification.

12
New cards

10GBASE-LR

Offers 10 Gigabit Ethernet over single-mode fiber with a maximum range of 10 kilometers.

13
New cards

Wavelength-Division Multiplexing (WDM)

enables bidirectional communication over a single fiber strand by using different wavelengths, or "colors," for each data carrier.

14
New cards

Coarse Wavelength-Division Multiplexing (CWDM)

Allows for the transmission of multiple data streams over a single fiber by using different wavelengths.

15
New cards

Dense Wavelength-Division Multiplexing (DWDM)

Allows for the multiplexing of multiple Optical Carrier (OC) signals into a single fiber, enabling up to 160 signals and supporting data rates of up to 1.6 terabits per second (Tbit/s).

16
New cards

What are the characteristic features of the 10BASE-T Ethernet standard?

Transfer rate of 10 Mbps over two-pair Category 3 or better UTP cable, Maximum cable segment length of 100 meters, and RJ45 connector

17
New cards

What are the characteristic features of the 100BASE-TX Ethernet standard?

Maximum cable segment length of 100 meters, Maximum cable segment length of 55 meters, and twisted-pair copper cabling (Category 5 or higher)

18
New cards

What are the characteristic features of the 1000BASE-T Ethernet standard?

Maximum cable segment length of 100 meters, Twisted-pair copper cabling (Cat 5 or higher), and uses all four pairs of wires in a cable for data transmission

19
New cards

Which of the answers listed below refer(s) to the characteristic features of the 10GBASE-T Ethernet standard?

10 Gbps transfer rate over a maximum cable segment length of 55 meters (Cat 6 UTP cable), 10 Gbps transfer rate over a maximum cable segment length of 100 meters (Cat 6 STP cable), Twisted-pair copper cabling, 10 Gbps transfer rate over a maximum cable segment length of 100 meters (Cat 6a UTP/STP cable), and uses all four pairs of wires in a cable for data transmission

20
New cards

Which of the following answers refer to the characteristic features of the 40GBASE-T Ethernet standard?

Uses all four pairs of wires in a cable for data transmission, Twisted-pair copper cabling, 40 Gbps transfer rate over a maximum cable segment length of 30 meters (Cat 8 cabling) ( Your answer)

21
New cards

What are the characteristic features of the 100BASE-FX Ethernet standard?

Maximum cable segment length of up to 412 meters (half-duplex communication), Maximum cable segment length of up to 2 kilometers (full-duplex communication), and multimode fiber

22
New cards

Which of the following answers refer to the 100BASE-SX standard?

Uses LED as the source of light, multimode fiber, maximum cable segment length of up to 300 meters

23
New cards

What are the characteristics of the 1000BASE-SX Ethernet standard?

Maximum cable segment length between 220 and 550 meters and Multimode fiber-optic cabling

24
New cards

Which of the answers listed below refer to the 1000BASE-LX Ethernet standard?

Maximum cable segment length of up to 5 kilometers over single-mode fiber, Fiber-optic cabling, and maximum cable segment length of up to 550 meters over multimode fiber

25
New cards

Which of the following answers refer to the 10GBASE-SR Ethernet standard

Uses laser as the source of light, Multimode fiber, and maximum cable segment length of up to 400 meters,

26
New cards

What are the characteristic features of the 10GBASE-LR Ethernet standard?

Uses laser as the source of light, single-mode fiber, and maximum cable segment length of up to 10 kilometers